From: Guenter Roeck <linux@roeck-us.net>
To: "Nuno Sá" <nuno.sa@analog.com>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
Jean Delvare <jdelvare@suse.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: Re: [PATCH v2 2/2] dt-bindings: hwmon: Add AXI FAN Control documentation
Date: Sun, 20 Oct 2019 09:12:56 -0700 [thread overview]
Message-ID: <20191020161256.GA27823@roeck-us.net> (raw)
In-Reply-To: <20191009102806.262241-2-nuno.sa@analog.com>
On Wed, Oct 09, 2019 at 12:28:06PM +0200, Nuno Sá wrote:
> Document the AXI FAN Control IP core devicetree bindings.
>
> Signed-off-by: Nuno Sá <nuno.sa@analog.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> Changes in v2:
> * Set the correct license for new bindings;
> * Fix wrong compatible in the example;
> * Wrap long line;
> * Update adi,pulses-per-revolution with accepted values.
>
> .../bindings/hwmon/adi,axi-fan-control.yaml | 62 +++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 63 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> new file mode 100644
> index 000000000000..dc82b9748c9d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2019 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AXI FAN Control Device Tree Bindings
> +
> +maintainers:
> + - Nuno Sá <nuno.sa@analog.com>
> +
> +description: |+
> + Bindings for the Analog Devices AXI FAN Control driver. Spefications of the
> + core can be found in:
> +
> + https://wiki.analog.com/resources/fpga/docs/axi_fan_control
> +
> +properties:
> + compatible:
> + enum:
> + - adi,axi-fan-control-1.00.a
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + adi,pulses-per-revolution:
> + description:
> + Value specifying the number of pulses per revolution of the controlled
> + FAN.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 4]
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - interrupts
> + - adi,pulses-per-revolution
> +
> +examples:
> + - |
> + fpga_axi: fpga-axi@0 {
> + #address-cells = <0x2>;
> + #size-cells = <0x1>;
> +
> + axi_fan_control: axi-fan-control@80000000 {
> + compatible = "adi,axi-fan-control-1.00.a";
> + reg = <0x0 0x80000000 0x10000>;
> + clocks = <&clk 71>;
> + interrupts = <0 110 0>;
> + adi,pulses-per-revolution = <2>;
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index caa80ae1925e..74ddcb3e1fd9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2879,6 +2879,7 @@ W: http://ez.analog.com/community/linux-device-drivers
> L: linux-hwmon@vger.kernel.org
> S: Supported
> F: drivers/hwmon/axi-fan-control.c
> +F: Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
>
> AXXIA I2C CONTROLLER
> M: Krzysztof Adamski <krzysztof.adamski@nokia.com>
prev parent reply other threads:[~2019-10-20 16:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191009102806.262241-1-nuno.sa@analog.com>
2019-10-20 16:12 ` [PATCH v2 1/2] hwmon: Support ADI Fan Control IP Guenter Roeck
2020-02-05 8:11 ` Sa, Nuno
2020-02-05 16:03 ` Guenter Roeck
[not found] ` <20191009102806.262241-2-nuno.sa@analog.com>
2019-10-20 16:12 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191020161256.GA27823@roeck-us.net \
--to=linux@roeck-us.net \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nuno.sa@analog.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).