* [PATCH 1/3] ARM: dts: Probe am335x musb with ti-sysc
2019-10-21 21:30 [PATCH 0/3] Probe am335x musb with ti-sysc and drop platform data Tony Lindgren
@ 2019-10-21 21:30 ` Tony Lindgren
2019-10-21 21:30 ` [PATCH 2/3] ARM: dts: Drop pointless status changing for am3 musb Tony Lindgren
2019-10-21 21:30 ` [PATCH 3/3] ARM: OMAP2+: Drop legacy platform data for am335x musb Tony Lindgren
2 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2019-10-21 21:30 UTC (permalink / raw)
To: linux-omap; +Cc: Benoît Cousson, devicetree, Bin Liu, Keerthy
We can now probe musb with ti-sysc interconnect driver and dts data
with the following changes:
1. Swap the old ti,am33xx-usb compatible wrapper to generic ti-sysc
driver. This means later on we can also remove the old wrapper driver
drivers/usb/musb/musb_am335x.c
2. Update the child nodes to use the ranges provided by ti-sysc
3. Drop unneeded status = "enabled" tinkering for SoC internal devices.
This allows us to remove some useless board specific boilerplate code
in the following patches
Cc: Bin Liu <b-liu@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am33xx-l4.dtsi | 7 ++++
arch/arm/boot/dts/am33xx.dtsi | 66 ++++++++++++++++----------------
2 files changed, 39 insertions(+), 34 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -303,6 +303,13 @@
};
};
+ usb_ctrl_mod: control@620 {
+ compatible = "ti,am335x-usb-ctrl-module";
+ reg = <0x620 0x10>,
+ <0x648 0x4>;
+ reg-names = "phy_ctrl", "wakeup";
+ };
+
wkup_m3_ipc: wkup_m3_ipc@1324 {
compatible = "ti,am3352-wkup-m3-ipc";
reg = <0x1324 0x24>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -262,37 +262,38 @@
};
};
- usb: usb@47400000 {
- compatible = "ti,am33xx-usb";
- reg = <0x47400000 0x1000>;
- ranges;
+ usb: target-module@47400000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x47400000 0x4>,
+ <0x47400010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
- ti,hwmods = "usb_otg_hs";
- status = "disabled";
-
- usb_ctrl_mod: control@44e10620 {
- compatible = "ti,am335x-usb-ctrl-module";
- reg = <0x44e10620 0x10
- 0x44e10648 0x4>;
- reg-names = "phy_ctrl", "wakeup";
- status = "disabled";
- };
+ ranges = <0x0 0x47400000 0x5000>;
- usb0_phy: usb-phy@47401300 {
+ usb0_phy: usb-phy@1300 {
compatible = "ti,am335x-usb-phy";
- reg = <0x47401300 0x100>;
+ reg = <0x1300 0x100>;
reg-names = "phy";
- status = "disabled";
ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
};
- usb0: usb@47401000 {
+ usb0: usb@1400 {
compatible = "ti,musb-am33xx";
- status = "disabled";
- reg = <0x47401400 0x400
- 0x47401000 0x200>;
+ reg = <0x1400 0x400>,
+ <0x1000 0x200>;
reg-names = "mc", "control";
interrupts = <18>;
@@ -328,20 +329,18 @@
"tx14", "tx15";
};
- usb1_phy: usb-phy@47401b00 {
+ usb1_phy: usb-phy@1b00 {
compatible = "ti,am335x-usb-phy";
- reg = <0x47401b00 0x100>;
+ reg = <0x1b00 0x100>;
reg-names = "phy";
- status = "disabled";
ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
};
- usb1: usb@47401800 {
+ usb1: usb@1800 {
compatible = "ti,musb-am33xx";
- status = "disabled";
- reg = <0x47401c00 0x400
- 0x47401800 0x200>;
+ reg = <0x1c00 0x400>,
+ <0x1800 0x200>;
reg-names = "mc", "control";
interrupts = <19>;
interrupt-names = "mc";
@@ -376,19 +375,18 @@
"tx14", "tx15";
};
- cppi41dma: dma-controller@47402000 {
+ cppi41dma: dma-controller@2000 {
compatible = "ti,am3359-cppi41";
- reg = <0x47400000 0x1000
- 0x47402000 0x1000
- 0x47403000 0x1000
- 0x47404000 0x4000>;
+ reg = <0x0000 0x1000>,
+ <0x2000 0x1000>,
+ <0x3000 0x1000>,
+ <0x4000 0x4000>;
reg-names = "glue", "controller", "scheduler", "queuemgr";
interrupts = <17>;
interrupt-names = "glue";
#dma-cells = <2>;
#dma-channels = <30>;
#dma-requests = <256>;
- status = "disabled";
};
};
--
2.23.0
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 2/3] ARM: dts: Drop pointless status changing for am3 musb
2019-10-21 21:30 [PATCH 0/3] Probe am335x musb with ti-sysc and drop platform data Tony Lindgren
2019-10-21 21:30 ` [PATCH 1/3] ARM: dts: Probe am335x musb with ti-sysc Tony Lindgren
@ 2019-10-21 21:30 ` Tony Lindgren
2019-10-21 21:30 ` [PATCH 3/3] ARM: OMAP2+: Drop legacy platform data for am335x musb Tony Lindgren
2 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2019-10-21 21:30 UTC (permalink / raw)
To: linux-omap; +Cc: Benoît Cousson, devicetree, Bin Liu, Keerthy
The default is enabled, and there should be no need to reconfigure
the status for SoC internal devices in the board specific files.
Only the USB PHY used needs to be configured in the board specific
files.
Cc: Bin Liu <b-liu@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am335x-baltos.dtsi | 12 --------
arch/arm/boot/dts/am335x-bone-common.dtsi | 22 ---------------
arch/arm/boot/dts/am335x-boneblue.dts | 22 ---------------
arch/arm/boot/dts/am335x-chiliboard.dts | 18 ------------
arch/arm/boot/dts/am335x-cm-t335.dts | 20 -------------
arch/arm/boot/dts/am335x-evm.dts | 25 -----------------
arch/arm/boot/dts/am335x-evmsk.dts | 25 -----------------
arch/arm/boot/dts/am335x-guardian.dts | 22 ---------------
arch/arm/boot/dts/am335x-igep0033.dtsi | 25 -----------------
arch/arm/boot/dts/am335x-lxm.dts | 22 ---------------
.../boot/dts/am335x-moxa-uc-2100-common.dtsi | 17 -----------
.../arm/boot/dts/am335x-moxa-uc-8100-me-t.dts | 22 ---------------
arch/arm/boot/dts/am335x-osd3358-sm-red.dts | 22 ---------------
arch/arm/boot/dts/am335x-pcm-953.dtsi | 25 -----------------
arch/arm/boot/dts/am335x-pdu001.dts | 28 -------------------
arch/arm/boot/dts/am335x-pepper.dts | 20 -------------
arch/arm/boot/dts/am335x-pocketbeagle.dts | 22 ---------------
arch/arm/boot/dts/am335x-regor.dtsi | 21 --------------
arch/arm/boot/dts/am335x-shc.dts | 17 -----------
arch/arm/boot/dts/am335x-sl50.dts | 22 ---------------
arch/arm/boot/dts/am335x-wega.dtsi | 26 -----------------
21 files changed, 455 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -258,18 +258,6 @@
};
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&cppi41dma {
- status = "okay";
-};
-
#include "tps65910.dtsi"
&tps {
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -191,38 +191,16 @@
status = "okay";
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
&usb0 {
- status = "okay";
dr_mode = "peripheral";
interrupts-extended = <&intc 18 &tps 0>;
interrupt-names = "mc", "vbus";
};
&usb1 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -278,38 +278,16 @@
status = "okay";
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
&usb0 {
- status = "okay";
dr_mode = "peripheral";
interrupts-extended = <&intc 18 &tps 0>;
interrupt-names = "mc", "vbus";
};
&usb1 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
&i2c0 {
baseboard_eeprom: baseboard_eeprom@50 {
compatible = "atmel,24c256";
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -153,30 +153,12 @@
};
/* USB */
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
&usb1 {
pinctrl-names = "default";
pinctrl-0 = <&usb1_drvvbus>;
-
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
/* microSD */
&mmc1 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -330,26 +330,6 @@ status = "okay";
};
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&cppi41dma {
- status = "okay";
-};
-
&epwmss0 {
status = "okay";
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -433,35 +433,10 @@
};
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
&usb1 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -523,35 +523,10 @@
};
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
&usb1 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
&epwmss2 {
status = "okay";
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -115,10 +115,6 @@
};
};
-&cppi41dma {
- status = "okay";
-};
-
&elm {
status = "okay";
};
@@ -328,30 +324,12 @@
status = "okay";
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
&usb0 {
dr_mode = "peripheral";
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
};
&usb1 {
dr_mode = "host";
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
};
&am33xx_pinmux {
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -217,35 +217,10 @@
pinctrl-0 = <&uart0_pins>;
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
&usb1 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
#include "tps65910.dtsi"
&tps {
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -283,36 +283,14 @@
status = "okay";
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
&usb0 {
- status = "okay";
dr_mode = "host";
};
&usb1 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
&cpsw_emac0 {
phy-handle = <ðphy0>;
phy-mode = "rmii";
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -111,27 +111,10 @@
};
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
&usb0 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
/* Power */
&vbat {
regulator-name = "vbat";
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -290,36 +290,14 @@
};
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
&usb0 {
- status = "okay";
dr_mode = "host";
};
&usb1 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
#include "tps65910.dtsi"
&tps {
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -384,38 +384,16 @@
status = "okay";
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
&usb0 {
- status = "okay";
dr_mode = "peripheral";
interrupts-extended = <&intc 18 &tps 0>;
interrupt-names = "mc", "vbus";
};
&usb1 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -237,31 +237,6 @@
};
/* USB */
-&cppi41dma {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
&usb1 {
- status = "okay";
dr_mode = "host";
};
-
-&usb1_phy {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -384,34 +384,6 @@
};
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
-
-&cppi41dma {
- status = "okay";
-};
-
/*
* Disable soc's rtc as we have no VBAT for it. This makes the board
* rtc (Microchip MCP79400) the default rtc device 'rtc0'.
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -552,38 +552,18 @@
/* USB */
&usb {
- status = "okay";
-
pinctrl-names = "default";
pinctrl-0 = <&usb_pins>;
};
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
&usb0 {
- status = "okay";
dr_mode = "host";
};
&usb1 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
&am33xx_pinmux {
usb_pins: pinmux_usb {
pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -206,32 +206,10 @@
status = "okay";
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
&usb0 {
- status = "okay";
dr_mode = "otg";
};
-&usb1_phy {
- status = "okay";
-};
-
&usb1 {
- status = "okay";
dr_mode = "host";
};
-
-&cppi41dma {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -200,24 +200,3 @@
status = "okay";
linux,rs485-enabled-at-boot-time;
};
-
-/* USB */
-&cppi41dma {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -117,10 +117,6 @@
status = "okay";
};
-&cppi41dma {
- status = "okay";
-};
-
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
@@ -358,20 +354,7 @@
status = "okay";
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
&usb1 {
- status = "okay";
dr_mode = "host";
};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -512,36 +512,14 @@
status = "disabled";
};
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
&usb0 {
- status = "okay";
dr_mode = "otg";
};
&usb1 {
- status = "okay";
dr_mode = "host";
};
-&cppi41dma {
- status = "okay";
-};
-
&mmc1 {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -191,32 +191,6 @@
status = "okay";
};
-/* USB */
-&cppi41dma {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
&usb1 {
dr_mode = "host";
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
};
--
2.23.0
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 3/3] ARM: OMAP2+: Drop legacy platform data for am335x musb
2019-10-21 21:30 [PATCH 0/3] Probe am335x musb with ti-sysc and drop platform data Tony Lindgren
2019-10-21 21:30 ` [PATCH 1/3] ARM: dts: Probe am335x musb with ti-sysc Tony Lindgren
2019-10-21 21:30 ` [PATCH 2/3] ARM: dts: Drop pointless status changing for am3 musb Tony Lindgren
@ 2019-10-21 21:30 ` Tony Lindgren
2 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2019-10-21 21:30 UTC (permalink / raw)
To: linux-omap; +Cc: Benoît Cousson, devicetree, Bin Liu, Keerthy
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Bin Liu <b-liu@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 44 ----------------------
1 file changed, 44 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -254,39 +254,6 @@ static struct omap_hwmod am33xx_lcdc_hwmod = {
},
};
-/*
- * 'usb_otg' class
- * high-speed on-the-go universal serial bus (usb_otg) controller
- */
-static struct omap_hwmod_class_sysconfig am33xx_usbhsotg_sysc = {
- .rev_offs = 0x0,
- .sysc_offs = 0x10,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_usbotg_class = {
- .name = "usbotg",
- .sysc = &am33xx_usbhsotg_sysc,
-};
-
-static struct omap_hwmod am33xx_usbss_hwmod = {
- .name = "usb_otg_hs",
- .class = &am33xx_usbotg_class,
- .clkdm_name = "l3s_clkdm",
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
- .main_clk = "usbotg_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM33XX_CM_PER_USB0_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-
/*
* Interfaces
*/
@@ -386,16 +353,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
.user = OCP_USER_MPU,
};
-/* usbss */
-/* l3 s -> USBSS interface */
-static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = {
- .master = &am33xx_l3_s_hwmod,
- .slave = &am33xx_usbss_hwmod,
- .clk = "l3s_gclk",
- .user = OCP_USER_MPU,
- .flags = OCPIF_SWSUP_IDLE,
-};
-
static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l3_main__emif,
&am33xx_mpu__l3_main,
@@ -441,7 +398,6 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l3_main__tptc1,
&am33xx_l3_main__tptc2,
&am33xx_l3_main__ocmc,
- &am33xx_l3_s__usbss,
&am33xx_l3_main__sha0,
&am33xx_l3_main__aes0,
NULL,
--
2.23.0
^ permalink raw reply [flat|nested] 4+ messages in thread