From: yegorslists@googlemail.com
To: linux-omap@vger.kernel.org
Cc: tony@atomide.com, robh+dt@kernel.org, devicetree@vger.kernel.org,
mark.rutland@arm.com, bcousson@baylibre.com,
Yegor Yefremov <yegorslists@googlemail.com>
Subject: [PATCH 1/3] ARM: dts: add DTS for NetCAN Plus devices
Date: Tue, 22 Oct 2019 09:21:28 +0200 [thread overview]
Message-ID: <20191022072130.17438-1-yegorslists@googlemail.com> (raw)
From: Yegor Yefremov <yegorslists@googlemail.com>
This DTS file covers both NetCAN Plus 110 and 120 WLAN models.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/am335x-netcan-plus-1xx.dts | 87 ++++++++++++++++++++
2 files changed, 88 insertions(+)
create mode 100644 arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b21b3a64641a..a92576e17133 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -753,6 +753,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-moxa-uc-2101.dtb \
am335x-moxa-uc-8100-me-t.dtb \
am335x-nano.dtb \
+ am335x-netcan-plus-1xx.dtb \
am335x-pdu001.dtb \
am335x-pepper.dtb \
am335x-phycore-rdk.dtb \
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
new file mode 100644
index 000000000000..1e4dbc85c120
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+ model = "NetCAN";
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "can_data";
+ linux,default-trigger = "netdev";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ led@2 {
+ label = "can_error";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ user_leds_s0: user_leds_s0 {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Data LED */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Error LED */
+ >;
+ };
+
+ dcan1_pins: pinmux_dcan1_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* CAN TX */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* CAN RX */
+ >;
+ };
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+};
+
+&cpsw_emac0 {
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
+ phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+ phy-mode = "rgmii-id";
+ dual_emac_res_vlan = <2>;
+ phy-handle = <&phy1>;
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+
+ status = "okay";
+};
--
2.17.0
next reply other threads:[~2019-10-22 7:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-22 7:21 yegorslists [this message]
2019-10-22 7:21 ` [PATCH 2/3] ARM: dts: add DTS for NetCom Plus 1xx and 2xx device series yegorslists
2019-10-22 7:21 ` [PATCH 3/3] ARM: dts: add DTS for NetCom Plus 4xx and 8xx " yegorslists
2019-10-23 16:43 ` [PATCH 1/3] ARM: dts: add DTS for NetCAN Plus devices Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191022072130.17438-1-yegorslists@googlemail.com \
--to=yegorslists@googlemail.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).