[PATCH v3 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

Add YAML devicetree binding for IMX296 CMOS image sensor.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 .../devicetree/bindings/media/i2c/imx296.yaml | 98 +++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/imx296.yaml b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
new file mode 100644
index 000000000000..4e204fd7cf90
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |-
+  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
+  sensor with square pixel array and 1.58 M effective pixels. This chip
+  features a global shutter with variable charge-integration time. It is
+  programmable through I2C and 4-wire interfaces. The sensor output is
+  available via CSI-2 serial data output (1 Lane).
+
+properties:
+  compatible:
+    const: sony,imx296
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Input clock for the sensor.
+    items:
+      - const: mclk
+
+  clock-frequency:
+    description:
+      Frequency of the mclk clock in Hertz.
+    default: 37125000
+
+  vddo-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+    maxItems: 1
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+    maxItems: 1
+
+  vddd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+    maxItems: 1
+
+  # See ../video-interfaces.txt for details
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - vddo-supply
+  - vdda-supply
+  - vddd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    imx296: camera-sensor@1a {
+        compatible = "sony,imx296";
+        reg = <0x1a>;
+        reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&camera_rear_default>;
+        clocks = <&gcc 90>;
+        clock-names = "mclk";
+        clock-frequency = <37125000>;
+        vddo-supply = <&camera_vddo_1v8>;
+        vdda-supply = <&camera_vdda_3v3>;
+        vddd-supply = <&camera_vddd_1v2>;
+
+        port {
+            imx296_ep: endpoint {
+                remote-endpoint = <&csiphy0_ep>;
+            };
+        };
+    };
+
+...
-- 
2.17.1