* [PATCH 1/9] ARM: dts: imx6qdl-{apf6,apf6dev}: switch boards to SPDX identifier
2019-10-22 13:16 [PATCH 0/9] ARM: dts: update APF6 / APF6Dev Sébastien Szymanski
@ 2019-10-22 13:16 ` Sébastien Szymanski
2019-10-24 20:38 ` Fabio Estevam
2019-10-22 13:16 ` [PATCH 2/9] ARM: dts: imx6qdl-{apf6,apf6dev}: remove container node around pinctrl nodes Sébastien Szymanski
` (7 subsequent siblings)
8 siblings, 1 reply; 12+ messages in thread
From: Sébastien Szymanski @ 2019-10-22 13:16 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
Cc: devicetree, linux-arm-kernel, Julien Boibessot,
Sébastien Szymanski
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
arch/arm/boot/dts/imx6dl-apf6dev.dts | 49 ++------------------------
arch/arm/boot/dts/imx6q-apf6dev.dts | 49 ++------------------------
arch/arm/boot/dts/imx6qdl-apf6.dtsi | 49 ++------------------------
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 49 ++------------------------
4 files changed, 12 insertions(+), 184 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts
index 6632e99fbb68..750f355a434a 100644
--- a/arch/arm/boot/dts/imx6dl-apf6dev.dts
+++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts
@@ -1,49 +1,6 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
/dts-v1/;
#include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts
index 07a36bb8075b..5d3c0c4129ba 100644
--- a/arch/arm/boot/dts/imx6q-apf6dev.dts
+++ b/arch/arm/boot/dts/imx6q-apf6dev.dts
@@ -1,49 +1,6 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
/dts-v1/;
#include "imx6q.dtsi"
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
index 4738c3c1ab50..392a71f99aaa 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
@@ -1,49 +1,6 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index 9fc1fa449f64..0c389bcc9d8c 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -1,49 +1,6 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
--
2.21.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH 1/9] ARM: dts: imx6qdl-{apf6,apf6dev}: switch boards to SPDX identifier
2019-10-22 13:16 ` [PATCH 1/9] ARM: dts: imx6qdl-{apf6,apf6dev}: switch boards to SPDX identifier Sébastien Szymanski
@ 2019-10-24 20:38 ` Fabio Estevam
2019-10-28 6:49 ` Shawn Guo
0 siblings, 1 reply; 12+ messages in thread
From: Fabio Estevam @ 2019-10-24 20:38 UTC (permalink / raw)
To: Sébastien Szymanski
Cc: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, NXP Linux Team,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Julien Boibessot
Hi Sébastien,
On Tue, Oct 22, 2019 at 10:17 AM Sébastien Szymanski
<sebastien.szymanski@armadeus.com> wrote:
> - * a) This file is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - */
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
The original license said "either version 2 of the License, or (at
your option) any later version."
So you should use:
// SPDX-License-Identifier: GPL-2.0+ OR MIT
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 1/9] ARM: dts: imx6qdl-{apf6,apf6dev}: switch boards to SPDX identifier
2019-10-24 20:38 ` Fabio Estevam
@ 2019-10-28 6:49 ` Shawn Guo
0 siblings, 0 replies; 12+ messages in thread
From: Shawn Guo @ 2019-10-28 6:49 UTC (permalink / raw)
To: Fabio Estevam
Cc: Sébastien Szymanski, Rob Herring, Mark Rutland, Sascha Hauer,
Pengutronix Kernel Team, NXP Linux Team,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Julien Boibessot
On Thu, Oct 24, 2019 at 05:38:22PM -0300, Fabio Estevam wrote:
> Hi Sébastien,
>
> On Tue, Oct 22, 2019 at 10:17 AM Sébastien Szymanski
> <sebastien.szymanski@armadeus.com> wrote:
>
> > - * a) This file is free software; you can redistribute it and/or
> > - * modify it under the terms of the GNU General Public License as
> > - * published by the Free Software Foundation; either version 2 of
> > - * the License, or (at your option) any later version.
>
> > - */
> > +// SPDX-License-Identifier: GPL-2.0 OR MIT
>
> The original license said "either version 2 of the License, or (at
> your option) any later version."
>
> So you should use:
>
> // SPDX-License-Identifier: GPL-2.0+ OR MIT
I fixed it up and applied the series.
Shawn
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/9] ARM: dts: imx6qdl-{apf6,apf6dev}: remove container node around pinctrl nodes
2019-10-22 13:16 [PATCH 0/9] ARM: dts: update APF6 / APF6Dev Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 1/9] ARM: dts: imx6qdl-{apf6,apf6dev}: switch boards to SPDX identifier Sébastien Szymanski
@ 2019-10-22 13:16 ` Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 3/9] ARM: dts: imx6qdl-apf6: add phy to fec Sébastien Szymanski
` (6 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Sébastien Szymanski @ 2019-10-22 13:16 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
Cc: devicetree, linux-arm-kernel, Julien Boibessot,
Sébastien Szymanski
Remove the function node around the pinctrl nodes that was obsoleted
by commit 5fcdf6a7ed95 ("pinctrl: imx: Allow parsing DT without
function nodes").
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
arch/arm/boot/dts/imx6qdl-apf6.dtsi | 112 +++++----
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 306 ++++++++++++-------------
2 files changed, 207 insertions(+), 211 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
index 392a71f99aaa..10981c74c90d 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
@@ -51,65 +51,63 @@
};
&iomuxc {
- apf6 {
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
- >;
- };
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0
- MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0
- MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0
- MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0
- MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0
+ MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0
+ MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */
+ >;
+ };
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
- MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */
- MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */
- >;
- };
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */
+ >;
+ };
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
- >;
- };
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index 0c389bcc9d8c..7cf41a9450b8 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -254,178 +254,176 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpios>;
- apf6dev {
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
- MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
- MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
- MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
- >;
- };
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ >;
+ };
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
- MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
- MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
- MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
- >;
- };
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+ >;
+ };
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
- MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
- >;
- };
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
- pinctrl_gpio_keys: gpiokeysgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
- >;
- };
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
- pinctrl_gpio_leds: gpioledsgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
- >;
- };
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
+ >;
+ };
- pinctrl_gpios: gpiosgrp {
- fsl,pins = <
- MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1
- MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
- MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1
- MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1
- MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1
- MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1
- MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1
- MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1
- MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1
- >;
- };
+ pinctrl_gpios: gpiosgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
+ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1
+ MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1
+ MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1
+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1
+ >;
+ };
- pinctrl_gsm: gsmgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */
- MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
- >;
- };
+ pinctrl_gsm: gsmgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
- MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
- >;
- };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ >;
+ };
- pinctrl_ipu1_disp1: ipu1disp1grp {
- fsl,pins = <
- MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1
- MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1
- MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1
- MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1
- MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1
- MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1
- MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1
- MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1
- MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1
- MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1
- MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1
- MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1
- MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1
- MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1
- MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1
- MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1
- MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1
- MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1
- MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1
- MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1
- MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1
- MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1
- >;
- };
+ pinctrl_ipu1_disp1: ipu1disp1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1
+ >;
+ };
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
- >;
- };
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
+ >;
+ };
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
- MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
+ >;
+ };
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0
- MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
- MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
- MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0
- >;
- };
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0
+ >;
+ };
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
- MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
- >;
- };
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
+ >;
+ };
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
- >;
- };
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
+ >;
+ };
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- >;
- };
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
- pinctrl_spdif: spdifgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
- >;
- };
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+ >;
+ };
- pinctrl_touchscreen: touchscreengrp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
- >;
- };
+ pinctrl_touchscreen: touchscreengrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
+ >;
};
};
--
2.21.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 3/9] ARM: dts: imx6qdl-apf6: add phy to fec
2019-10-22 13:16 [PATCH 0/9] ARM: dts: update APF6 / APF6Dev Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 1/9] ARM: dts: imx6qdl-{apf6,apf6dev}: switch boards to SPDX identifier Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 2/9] ARM: dts: imx6qdl-{apf6,apf6dev}: remove container node around pinctrl nodes Sébastien Szymanski
@ 2019-10-22 13:16 ` Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 4/9] ARM: dts: imx6qdl-apf6: add flow control to uart2 Sébastien Szymanski
` (5 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Sébastien Szymanski @ 2019-10-22 13:16 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
Cc: devicetree, linux-arm-kernel, Julien Boibessot,
Sébastien Szymanski
Add the mdio bus and the phy to the fec-node.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
arch/arm/boot/dts/imx6qdl-apf6.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
index 10981c74c90d..37cbdfd4fb33 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
@@ -11,7 +11,21 @@
phy-mode = "rgmii-id";
phy-reset-duration = <10>;
phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ phy-handle = <ðphy1>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
+ };
+ };
};
/* Bluetooth */
--
2.21.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 4/9] ARM: dts: imx6qdl-apf6: add flow control to uart2
2019-10-22 13:16 [PATCH 0/9] ARM: dts: update APF6 / APF6Dev Sébastien Szymanski
` (2 preceding siblings ...)
2019-10-22 13:16 ` [PATCH 3/9] ARM: dts: imx6qdl-apf6: add phy to fec Sébastien Szymanski
@ 2019-10-22 13:16 ` Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 5/9] ARM: dts: imx6qdl-apf6: fix WiFi Sébastien Szymanski
` (4 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Sébastien Szymanski @ 2019-10-22 13:16 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
Cc: devicetree, linux-arm-kernel, Julien Boibessot,
Sébastien Szymanski
RTS/CTS lines are wired to the Bluetooth chip so add uart-has-rtscts
property to uart2.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
arch/arm/boot/dts/imx6qdl-apf6.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
index 37cbdfd4fb33..c99e764a25b7 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
@@ -32,6 +32,7 @@
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
status = "okay";
};
--
2.21.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 5/9] ARM: dts: imx6qdl-apf6: fix WiFi
2019-10-22 13:16 [PATCH 0/9] ARM: dts: update APF6 / APF6Dev Sébastien Szymanski
` (3 preceding siblings ...)
2019-10-22 13:16 ` [PATCH 4/9] ARM: dts: imx6qdl-apf6: add flow control to uart2 Sébastien Szymanski
@ 2019-10-22 13:16 ` Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 6/9] ARM: dts: imx6qdl-apf6dev: add RTC support Sébastien Szymanski
` (3 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Sébastien Szymanski @ 2019-10-22 13:16 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
Cc: devicetree, linux-arm-kernel, Julien Boibessot,
Sébastien Szymanski
These changes make the WiFi on the APF6 board work again.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
arch/arm/boot/dts/imx6qdl-apf6.dtsi | 28 ++++++++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
index c99e764a25b7..997d685ecc98 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
@@ -5,6 +5,24 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+/ {
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <®_3p3v>;
+ };
+
+ usdhc1_pwrseq: usdhc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <15>;
+ power-off-delay-us = <70>;
+ };
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -40,6 +58,12 @@
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ mmc-pwrseq = <&usdhc1_pwrseq>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ cap-power-off-card;
+ keep-power-in-suspend;
non-removable;
status = "okay";
@@ -106,8 +130,8 @@
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
- MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */
- MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x130b0 /* WL_EN */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x130b0 /* WL_IRQ */
>;
};
--
2.21.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 6/9] ARM: dts: imx6qdl-apf6dev: add RTC support
2019-10-22 13:16 [PATCH 0/9] ARM: dts: update APF6 / APF6Dev Sébastien Szymanski
` (4 preceding siblings ...)
2019-10-22 13:16 ` [PATCH 5/9] ARM: dts: imx6qdl-apf6: fix WiFi Sébastien Szymanski
@ 2019-10-22 13:16 ` Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 7/9] ARM: dts: imx6qdl-apf6dev: rename usb-h1-vbus regulator to 5V Sébastien Szymanski
` (2 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Sébastien Szymanski @ 2019-10-22 13:16 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
Cc: devicetree, linux-arm-kernel, Julien Boibessot,
Sébastien Szymanski
Add support of MCP79400 RTC.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index 7cf41a9450b8..331d55ae9ac9 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -169,6 +169,11 @@
VDDA-supply = <®_3p3v>;
VDDIO-supply = <®_3p3v>;
};
+
+ rtc@6f {
+ compatible = "microchip,mcp7940x";
+ reg = <0x6f>;
+ };
};
&i2c3 {
--
2.21.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 7/9] ARM: dts: imx6qdl-apf6dev: rename usb-h1-vbus regulator to 5V
2019-10-22 13:16 [PATCH 0/9] ARM: dts: update APF6 / APF6Dev Sébastien Szymanski
` (5 preceding siblings ...)
2019-10-22 13:16 ` [PATCH 6/9] ARM: dts: imx6qdl-apf6dev: add RTC support Sébastien Szymanski
@ 2019-10-22 13:16 ` Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 8/9] ARM: dts: imx6qdl-apf6dev: add backlight support Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 9/9] ARM: dts: imx6qdl-apf6dev: use DRM bindings Sébastien Szymanski
8 siblings, 0 replies; 12+ messages in thread
From: Sébastien Szymanski @ 2019-10-22 13:16 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
Cc: devicetree, linux-arm-kernel, Julien Boibessot,
Sébastien Szymanski
This regulator supplies other devices and not only usb host1 so
rename it.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index 331d55ae9ac9..9067355d8541 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -74,11 +74,12 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
+ vin-supply = <®_5v>;
};
- reg_usbh1_vbus: regulator-usb-h1-vbus {
+ reg_5v: regulator-5v {
compatible = "regulator-fixed";
- regulator-name = "usb_h1_vbus";
+ regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
@@ -123,6 +124,7 @@
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_5v>;
status = "okay";
};
@@ -223,7 +225,7 @@
};
&usbh1 {
- vbus-supply = <®_usbh1_vbus>;
+ vbus-supply = <®_5v>;
phy_type = "utmi";
status = "okay";
};
--
2.21.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 8/9] ARM: dts: imx6qdl-apf6dev: add backlight support
2019-10-22 13:16 [PATCH 0/9] ARM: dts: update APF6 / APF6Dev Sébastien Szymanski
` (6 preceding siblings ...)
2019-10-22 13:16 ` [PATCH 7/9] ARM: dts: imx6qdl-apf6dev: rename usb-h1-vbus regulator to 5V Sébastien Szymanski
@ 2019-10-22 13:16 ` Sébastien Szymanski
2019-10-22 13:16 ` [PATCH 9/9] ARM: dts: imx6qdl-apf6dev: use DRM bindings Sébastien Szymanski
8 siblings, 0 replies; 12+ messages in thread
From: Sébastien Szymanski @ 2019-10-22 13:16 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
Cc: devicetree, linux-arm-kernel, Julien Boibessot,
Sébastien Szymanski
Add PWM backlight support.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index 9067355d8541..f617089be9cc 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -11,6 +11,14 @@
stdout-path = &uart4;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 191000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <0>;
+ power-supply = <®_5v>;
+ };
+
disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
--
2.21.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 9/9] ARM: dts: imx6qdl-apf6dev: use DRM bindings
2019-10-22 13:16 [PATCH 0/9] ARM: dts: update APF6 / APF6Dev Sébastien Szymanski
` (7 preceding siblings ...)
2019-10-22 13:16 ` [PATCH 8/9] ARM: dts: imx6qdl-apf6dev: add backlight support Sébastien Szymanski
@ 2019-10-22 13:16 ` Sébastien Szymanski
8 siblings, 0 replies; 12+ messages in thread
From: Sébastien Szymanski @ 2019-10-22 13:16 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
Cc: devicetree, linux-arm-kernel, Julien Boibessot,
Sébastien Szymanski
Describe the parallel LCD using simple panel driver.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 50 ++++++++++++++------------
1 file changed, 28 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index f617089be9cc..0aae958640db 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -21,33 +21,27 @@
disp0 {
compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "bgr666";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu1_disp1>;
-
- display-timings {
- lw700 {
- clock-frequency = <33000033>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <96>;
- hfront-porch = <96>;
- vback-porch = <20>;
- vfront-porch = <21>;
- hsync-len = <64>;
- vsync-len = <4>;
- hsync-active = <1>;
- vsync-active = <1>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
+ pinctrl-0 = <&pinctrl_ipu1_disp0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
- port {
display_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
};
gpio-keys {
@@ -76,6 +70,18 @@
};
};
+ panel {
+ compatible = "armadeus,st0700-adapt";
+ power-supply = <®_3p3v>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
@@ -351,7 +357,7 @@
>;
};
- pinctrl_ipu1_disp1: ipu1disp1grp {
+ pinctrl_ipu1_disp0: ipu1disp0grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1
--
2.21.0
^ permalink raw reply related [flat|nested] 12+ messages in thread