Re: [Patch 02/19] dt-bindings: media: cal: update binding example

[Rob Herring <robh@kernel.org>]

On Fri, Oct 18, 2019 at 10:34:20AM -0500, Benoit Parrot wrote:
> Update binding example to show proper endpoint properties and linkage.
> 
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
>  .../devicetree/bindings/media/ti-cal.txt      | 32 ++++++++++---------
>  1 file changed, 17 insertions(+), 15 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt
> index 782f801b12a9..6b56fddcfc4a 100644
> --- a/Documentation/devicetree/bindings/media/ti-cal.txt
> +++ b/Documentation/devicetree/bindings/media/ti-cal.txt
> @@ -27,7 +27,6 @@ Documentation/devicetree/bindings/media/video-interfaces.txt.
>  Example:
>  	cal: cal@4845b000 {
>  		compatible = "ti,dra72-cal";
> -		ti,hwmods = "cal";
>  		reg = <0x4845B000 0x400>,
>  		      <0x4845B800 0x40>,
>  		      <0x4845B900 0x40>;
> @@ -45,9 +44,10 @@ Example:
>  
>  			csi2_0: port@0 {
>  				reg = <0>;
> -				endpoint {
> -					slave-mode;
> -					remote-endpoint = <&ar0330_1>;
> +				csi2_phy0: endpoint@0 {

Unit address without 'reg' is not correct.

> +					remote-endpoint = <&csi2_cam0>;
> +					clock-lanes = <0>;
> +					data-lanes = <1 2>;
>  				};
>  			};
>  			csi2_1: port@1 {
> @@ -57,19 +57,21 @@ Example:
>  	};
>  
>  	i2c5: i2c@4807c000 {
> -		ar0330@10 {
> -			compatible = "ti,ar0330";
> -			reg = <0x10>;
> +		status = "okay";

Don't show status in examples.

> +		clock-frequency = <400000>;
>  
> -			port {
> -				#address-cells = <1>;
> -				#size-cells = <0>;
> +		ov5640@3c {

camera-sensor@3c

> +			compatible = "ovti,ov5640";
> +			reg = <0x3c>;
> +
> +			clocks = <&clk_ov5640_fixed>;
> +			clock-names = "xclk";
>  
> -				ar0330_1: endpoint {
> -					reg = <0>;
> -					clock-lanes = <1>;
> -					data-lanes = <0 2 3 4>;
> -					remote-endpoint = <&csi2_0>;
> +			port {
> +				csi2_cam0: endpoint {
> +					remote-endpoint = <&csi2_phy0>;
> +					clock-lanes = <0>;
> +					data-lanes = <1 2>;
>  				};
>  			};
>  		};
> -- 
> 2.17.1
>