Re: [PATCH v6 1/2] dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY

[Rob Herring <robh@kernel.org>]

On Mon, Oct 21, 2019 at 05:54:35PM +0800, Ramuthevar,Vadivel MuruganX wrote:
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> 
> Add a YAML schema to use the host controller driver with the
> eMMC PHY on Intel's Lightning Mountain SoC.
> 
> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> ---
> ---
>  .../bindings/phy/intel,lgm-emmc-phy.yaml           | 63 ++++++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> new file mode 100644
> index 000000000000..bc1285be31f9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
> +
> +maintainers:
> +  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> +
> +description: Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon
> +  node is used to reference the base address of eMMC phy registers.
> +
> +select:

You don't need a 'select'.

> +  properties:
> +    compatible:
> +      items:
> +       - const: intel,lgm-syscon
> +       - const: intel,lgm-emmc-phy

This is not right. You are saying 'compatible' must be:

compatible = "intel,lgm-syscon", "intel,lgm-emmc-phy";

> +
> +    reg:
> +      maxItems: 1
> +
> +  required:
> +    - compatible
> +    - reg
> +
> +properties:
> +  "#phy-cells":
> +    const: 0
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    maxItems: 1
> +
> +required:
> +  - "#phy-cells"
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +
> +examples:
> +  - |
> +    sysconf: chiptop@e0200000 {
> +      compatible = "intel,lgm-syscon";
> +      reg = <0xe0200000 0x100>;
> +
> +      emmc-phy: emmc-phy {

phy@a8

What else in in the chiptop block?

> +        compatible = "intel,lgm-emmc-phy";
> +        reg = <0x00a8 0x10>;
> +        clocks = <&emmc>;
> +        clock-names = "emmcclk";
> +        #phy-cells = <0>;
> +      };
> +    };
> +...
> -- 
> 2.11.0
>