From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Andrey Smirnov" <andrew.smirnov@gmail.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Graeme Smecher" <gsmecher@threespeedlogic.com>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
"Sasha Levin" <sashal@kernel.org>
Subject: [PATCH AUTOSEL 5.3 30/81] ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
Date: Wed, 30 Oct 2019 11:48:36 -0400 [thread overview]
Message-ID: <20191030154928.9432-30-sashal@kernel.org> (raw)
In-Reply-To: <20191030154928.9432-1-sashal@kernel.org>
From: Andrey Smirnov <andrew.smirnov@gmail.com>
[ Upstream commit 647c8977e111c0a62c93a489ebc4b045c833fdb4 ]
According to
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt,
i2c-mux-idle-disconnect is a property of a parent node since it
pertains to the mux/switch as a whole, so move it there and drop all
of the concurrences in child nodes.
Fixes: d031773169df ("ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: linux-omap@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/am3874-iceboard.dts | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
index 883fb85135d46..1b4b2b0500e4c 100644
--- a/arch/arm/boot/dts/am3874-iceboard.dts
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@@ -111,13 +111,13 @@
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-mux-idle-disconnect;
i2c@0 {
/* FMC A */
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
- i2c-mux-idle-disconnect;
};
i2c@1 {
@@ -125,7 +125,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
- i2c-mux-idle-disconnect;
};
i2c@2 {
@@ -133,7 +132,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
- i2c-mux-idle-disconnect;
};
i2c@3 {
@@ -141,7 +139,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
- i2c-mux-idle-disconnect;
};
i2c@4 {
@@ -149,14 +146,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- i2c-mux-idle-disconnect;
};
i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
- i2c-mux-idle-disconnect;
ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
@@ -182,14 +177,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
- i2c-mux-idle-disconnect;
};
i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
- i2c-mux-idle-disconnect;
u41: pca9575@20 {
compatible = "nxp,pca9575";
--
2.20.1
next prev parent reply other threads:[~2019-10-30 16:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191030154928.9432-1-sashal@kernel.org>
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 06/81] arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 07/81] arm64: dts: allwinner: a64: Drop PMU node Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 08/81] arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 09/81] arm64: dts: Fix gpio to pinmux mapping Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 23/81] arm64: dts: rockchip: fix Rockpro64 RK808 interrupt line Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 24/81] ARM: dts: logicpd-torpedo-som: Remove twl_keypad Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 25/81] arm64: dts: rockchip: fix RockPro64 vdd-log regulator settings Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 26/81] arm64: dts: rockchip: fix RockPro64 sdhci settings Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 29/81] arm64: dts: zii-ultra: fix ARM regulator states Sasha Levin
2019-10-30 15:48 ` Sasha Levin [this message]
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 33/81] ARM: dts: Use level interrupt for omap4 & 5 wlcore Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 41/81] arm64: dts: rockchip: fix RockPro64 sdmmc settings Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 42/81] arm64: dts: rockchip: Fix usb-c on Hugsun X99 TV Box Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 43/81] arm64: dts: lx2160a: Correct CPU core idle state name Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 44/81] ARM: dts: imx6q-logicpd: Re-Enable SNVS power key Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 45/81] ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 46/81] ARM: dts: imx7s: Correct GPT's ipg clock source Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 47/81] arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 48/81] arm64: dts: imx8mm: " Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 62/81] ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191030154928.9432-30-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andrew.smirnov@gmail.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=gsmecher@threespeedlogic.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).