devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joel Stanley <joel@jms.id.au>
To: Rob Herring <robh+dt@kernel.org>,
	Andrew Jeffery <andrew@aj.id.au>, Jeremy Kerr <jk@ozlabs.org>,
	Alistar Popple <alistair@popple.id.au>,
	Eddie James <eajames@linux.ibm.com>,
	Steven Rostedt <rostedt@goodmis.org>,
	Ingo Molnar <mingo@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	devicetree@vger.kernel.org, linux-fsi@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] fsi: aspeed: Add trace points
Date: Fri,  1 Nov 2019 21:59:05 +1030	[thread overview]
Message-ID: <20191101112905.7282-5-joel@jms.id.au> (raw)
In-Reply-To: <20191101112905.7282-1-joel@jms.id.au>

These trace points help with debugging the FSI master. They show the low
level reads, writes and error states of the master.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 drivers/fsi/fsi-master-aspeed.c          | 22 +++++++
 include/trace/events/fsi_master_aspeed.h | 77 ++++++++++++++++++++++++
 2 files changed, 99 insertions(+)
 create mode 100644 include/trace/events/fsi_master_aspeed.h

diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index 5bb7a778075e..be1f2449b77a 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -67,6 +67,9 @@ static const u32 fsi_base = 0xa0000000;
 #define XFER_HALFWORD	(BIT(0))
 #define XFER_BYTE	(0)
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi_master_aspeed.h>
+
 #define FSI_LINK_ENABLE_SETUP_TIME	10	/* in mS */
 
 #define DEFAULT_DIVISOR			14
@@ -92,6 +95,8 @@ static int __opb_write(struct fsi_master_aspeed *aspeed, u32 addr,
 
 	status = readl(base + OPB0_STATUS);
 
+	trace_fsi_master_aspeed_opb_write(addr, val, transfer_size, status, reg);
+
 	/* Return error when poll timed out */
 	if (ret)
 		return ret;
@@ -139,6 +144,10 @@ static int __opb_read(struct fsi_master_aspeed *aspeed, uint32_t addr,
 
 	result = readl(base + OPB0_FSI_DATA_R);
 
+	trace_fsi_master_aspeed_opb_read(addr, transfer_size, result,
+			readl(base + OPB0_STATUS),
+			reg);
+
 	/* Return error when poll timed out */
 	if (ret)
 		return ret;
@@ -186,6 +195,19 @@ static int check_errors(struct fsi_master_aspeed *aspeed, int err)
 {
 	int ret;
 
+	if (trace_fsi_master_aspeed_opb_error_enabled()) {
+		__be32 mresp0, mstap0, mesrb0;
+
+		opb_readl(aspeed, ctrl_base + FSI_MRESP0, &mresp0);
+		opb_readl(aspeed, ctrl_base + FSI_MSTAP0, &mstap0);
+		opb_readl(aspeed, ctrl_base + FSI_MESRB0, &mesrb0);
+
+		trace_fsi_master_aspeed_opb_error(
+				be32_to_cpu(mresp0),
+				be32_to_cpu(mstap0),
+				be32_to_cpu(mesrb0));
+	};
+
 	if (err == -EIO) {
 		/* Check MAEB (0x70) ? */
 
diff --git a/include/trace/events/fsi_master_aspeed.h b/include/trace/events/fsi_master_aspeed.h
new file mode 100644
index 000000000000..a355ceacc33f
--- /dev/null
+++ b/include/trace/events/fsi_master_aspeed.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM fsi_master_aspeed
+
+#if !defined(_TRACE_FSI_MASTER_ASPEED_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_FSI_MASTER_ASPEED_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(fsi_master_aspeed_opb_read,
+	TP_PROTO(uint32_t addr, size_t size, uint32_t result, uint32_t status, uint32_t irq_status),
+	TP_ARGS(addr, size, result, status, irq_status),
+	TP_STRUCT__entry(
+		__field(uint32_t,  addr)
+		__field(size_t,    size)
+		__field(uint32_t,  result)
+		__field(uint32_t,  status)
+		__field(uint32_t,  irq_status)
+		),
+	TP_fast_assign(
+		__entry->addr = addr;
+		__entry->size = size;
+		__entry->result = result;
+		__entry->status = status;
+		__entry->irq_status = irq_status;
+		),
+	TP_printk("addr %08x size %zu: result %08x sts: %08x irq_sts: %08x",
+		__entry->addr, __entry->size, __entry->result,
+		__entry->status, __entry->irq_status
+	   )
+);
+
+TRACE_EVENT(fsi_master_aspeed_opb_write,
+	TP_PROTO(uint32_t addr, uint32_t val, size_t size, uint32_t status, uint32_t irq_status),
+	TP_ARGS(addr, val, size, status, irq_status),
+	TP_STRUCT__entry(
+		__field(uint32_t,    addr)
+		__field(uint32_t,    val)
+		__field(size_t,    size)
+		__field(uint32_t,  status)
+		__field(uint32_t,  irq_status)
+		),
+	TP_fast_assign(
+		__entry->addr = addr;
+		__entry->val = val;
+		__entry->size = size;
+		__entry->status = status;
+		__entry->irq_status = irq_status;
+		),
+	TP_printk("addr %08x val %08x size %zu status: %08x irq_sts: %08x",
+		__entry->addr, __entry->val, __entry->size,
+		__entry->status, __entry->irq_status
+		)
+	);
+
+TRACE_EVENT(fsi_master_aspeed_opb_error,
+	TP_PROTO(uint32_t mresp0, uint32_t mstap0, uint32_t mesrb0),
+	TP_ARGS(mresp0, mstap0, mesrb0),
+	TP_STRUCT__entry(
+		__field(uint32_t,  mresp0)
+		__field(uint32_t,  mstap0)
+		__field(uint32_t,  mesrb0)
+		),
+	TP_fast_assign(
+		__entry->mresp0 = mresp0;
+		__entry->mstap0 = mstap0;
+		__entry->mesrb0 = mesrb0;
+		),
+	TP_printk("mresp0 %08x mstap0 %08x mesrb0 %08x",
+		__entry->mresp0, __entry->mstap0, __entry->mesrb0
+		)
+	);
+
+#endif
+
+#include <trace/define_trace.h>
-- 
2.24.0.rc1


      parent reply	other threads:[~2019-11-01 11:29 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-01 11:29 [PATCH 0/3] fsi: Add AST2600 FSI master Joel Stanley
2019-11-01 11:29 ` Joel Stanley
2019-11-01 11:29 ` [PATCH 1/3] dt-bindings: fsi: Add description of " Joel Stanley
2019-11-27 23:30   ` Andrew Jeffery
2019-11-01 11:29 ` [PATCH 2/3] fsi: Add ast2600 master driver Joel Stanley
2019-11-01 11:29 ` Joel Stanley [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191101112905.7282-5-joel@jms.id.au \
    --to=joel@jms.id.au \
    --cc=alistair@popple.id.au \
    --cc=andrew@aj.id.au \
    --cc=benh@kernel.crashing.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eajames@linux.ibm.com \
    --cc=jk@ozlabs.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fsi@lists.ozlabs.org \
    --cc=mingo@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).