[PATCH] ARM: dts: Configure sgx for dra7

[PATCH] ARM: dts: Configure sgx for dra7

[Tony Lindgren]

I've tested that the interconnect target module enables and idles
just fine when probed with ti-sysc with PM runtime control via sys:

# echo on > $(find /sys -name control | grep \/5600)
# rwmem 0x5600fe00      # OCP Revision
0x5600fe00 = 0x40000000
# echo auto > $(find /sys -name control | grep \/5600)

Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

This patch depends on "[PATCH] clk: ti: add clkctrl data dra7 sgx".

---
 arch/arm/boot/dts/dra7.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -673,6 +673,24 @@
 			status = "disabled";
 		};
 
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
-- 
2.23.0