Re: [PATCH 1/4] dt-bindings: Add BCM2711 thermal

[Rob Herring <robh@kernel.org>]

On Fri, Nov 01, 2019 at 02:42:26PM +0100, Stefan Wahren wrote:
> Since the BCM2711 doesn't have a AVS TMON block, the thermal information
> must be retrieved from the AVS ring oscillator block. So add a new
> suitable binding.

Anything else in that block? 
> 
> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
> ---
>  .../bindings/thermal/brcm,bcm2711-thermal.txt      | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,bcm2711-thermal.txt
> 
> diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2711-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2711-thermal.txt
> new file mode 100644
> index 0000000..5531d3f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2711-thermal.txt
> @@ -0,0 +1,39 @@
> +Binding for Thermal Sensor driver for BCM2711 SoCs.
> +
> +Required properties:
> +- compatible:		must be: "brcm,bcm2711-thermal"

If the block is called 'AVS ring oscillator', then the compatible name 
should mirror that.

> +- reg:			Address range of the thermal registers.
> +- clocks:		Phandle of the clock used by the thermal sensor.
> +- #thermal-sensor-cells:	should be 0 (see thermal.txt)
> +
> +Example:
> +
> +thermal-zones {
> +	cpu_thermal: cpu-thermal {
> +		polling-delay-passive = <0>;
> +		polling-delay = <1000>;
> +
> +		thermal-sensors = <&thermal>;
> +
> +		trips {
> +			cpu-crit {
> +				temperature	= <80000>;
> +				hysteresis	= <0>;
> +				type		= "critical";
> +			};
> +		};
> +
> +		coefficients = <(-487)  410040>;
> +
> +		cooling-maps {
> +		};
> +	};
> +};
> +
> +thermal@7d5d2200 {
> +	compatible = "brcm,bcm2711-thermal";
> +	reg = <0x7d5d2200 0x4>;
> +	clocks = <&clocks BCM2835_CLOCK_TSENS>;
> +	#thermal-sensor-cells = <0>;
> +};
> +
> --
> 2.7.4
>