From: Michael Walle <michael@walle.cc>
To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
netdev@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>, David Miller <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Simon Horman <simon.horman@netronome.com>,
Andrew Lunn <andrew@lunn.ch>,
Oleksij Rempel <o.rempel@pengutronix.de>,
Michael Walle <michael@walle.cc>
Subject: [PATCH v2 5/6] net: phy: at803x: fix the PHY names
Date: Wed, 6 Nov 2019 23:36:16 +0100 [thread overview]
Message-ID: <20191106223617.1655-6-michael@walle.cc> (raw)
In-Reply-To: <20191106223617.1655-1-michael@walle.cc>
Fix at least the displayed strings. The actual name of the chip is
AR803x.
Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/net/phy/at803x.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 716672edd415..4434d501cd4f 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -2,7 +2,7 @@
/*
* drivers/net/phy/at803x.c
*
- * Driver for Atheros 803x PHY
+ * Driver for Qualcomm Atheros AR803x PHY
*
* Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
*/
@@ -109,7 +109,7 @@
#define ATH8035_PHY_ID 0x004dd072
#define AT803X_PHY_ID_MASK 0xffffffef
-MODULE_DESCRIPTION("Atheros 803x PHY driver");
+MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");
@@ -706,9 +706,9 @@ static int at803x_read_status(struct phy_device *phydev)
static struct phy_driver at803x_driver[] = {
{
- /* ATHEROS 8035 */
+ /* Qualcomm Atheros AR8035 */
.phy_id = ATH8035_PHY_ID,
- .name = "Atheros 8035 ethernet",
+ .name = "Qualcomm Atheros AR8035",
.phy_id_mask = AT803X_PHY_ID_MASK,
.probe = at803x_probe,
.config_init = at803x_config_init,
@@ -721,9 +721,9 @@ static struct phy_driver at803x_driver[] = {
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
}, {
- /* ATHEROS 8030 */
+ /* Qualcomm Atheros AR8030 */
.phy_id = ATH8030_PHY_ID,
- .name = "Atheros 8030 ethernet",
+ .name = "Qualcomm Atheros AR8030",
.phy_id_mask = AT803X_PHY_ID_MASK,
.probe = at803x_probe,
.config_init = at803x_config_init,
@@ -736,9 +736,9 @@ static struct phy_driver at803x_driver[] = {
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
}, {
- /* ATHEROS 8031/8033 */
+ /* Qualcomm Atheros AR8031/AR8033 */
.phy_id = ATH8031_PHY_ID,
- .name = "Atheros 8031/8033 ethernet",
+ .name = "Qualcomm Atheros AR8031/AR8033",
.phy_id_mask = AT803X_PHY_ID_MASK,
.probe = at803x_probe,
.config_init = at803x_config_init,
@@ -754,7 +754,7 @@ static struct phy_driver at803x_driver[] = {
}, {
/* ATHEROS AR9331 */
PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
- .name = "Atheros AR9331 built-in PHY",
+ .name = "Qualcomm Atheros AR9331 built-in PHY",
.probe = at803x_probe,
.config_init = at803x_config_init,
.suspend = at803x_suspend,
--
2.20.1
next prev parent reply other threads:[~2019-11-06 22:37 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 22:36 [PATCH v2 0/6] net: phy: at803x device tree binding Michael Walle
2019-11-06 22:36 ` [PATCH v2 1/6] net: phy: at803x: fix Kconfig description Michael Walle
2019-11-07 1:50 ` Andrew Lunn
2019-11-06 22:36 ` [PATCH v2 2/6] dt-bindings: net: phy: Add support for AT803X Michael Walle
2019-11-07 1:51 ` Andrew Lunn
2019-11-06 22:36 ` [PATCH v2 3/6] net: phy: at803x: add device tree binding Michael Walle
2019-11-06 22:36 ` [PATCH v2 4/6] net: phy: at803x: mention AR8033 as same as AR8031 Michael Walle
2019-11-07 2:04 ` Andrew Lunn
2019-11-07 7:47 ` Michael Walle
2019-11-07 12:55 ` Andrew Lunn
2019-11-07 14:28 ` Michael Walle
2019-11-06 22:36 ` Michael Walle [this message]
2019-11-07 2:05 ` [PATCH v2 5/6] net: phy: at803x: fix the PHY names Andrew Lunn
2019-11-06 22:36 ` [PATCH v2 6/6] net: phy: at803x: remove config_init for AR9331 Michael Walle
2019-11-07 2:05 ` Andrew Lunn
2019-11-07 5:42 ` [PATCH v2 0/6] net: phy: at803x device tree binding David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191106223617.1655-6-michael@walle.cc \
--to=michael@walle.cc \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=robh@kernel.org \
--cc=simon.horman@netronome.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).