[PATCH AUTOSEL 4.9 04/64] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply

[PATCH AUTOSEL 4.9 04/64] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply

[Sasha Levin]

From: Aapo Vienamo <avienamo@nvidia.com>

[ Upstream commit 6ff7705da8806de45ca1490194f0b4eb07725804 ]

On p2180 sdmmc4 is powered from a fixed 1.8 V regulator.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 6a51d282ec636..d1e687b4911f5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -281,6 +281,7 @@
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
+		vqmmc-supply = <&vdd_1v8>;
 	};
 
 	clocks {
-- 
2.20.1

[PATCH AUTOSEL 4.9 05/64] ARM: dts: at91/trivial: Fix USART1 definition for at91sam9g45

[Sasha Levin]

From: Jay Foster <jayfoster@ieee.org>

[ Upstream commit 10af10db8c76fa5b9bf1f52a895c1cb2c0ac24da ]

Fix a typo. No functional change made by this patch.

Signed-off-by: Jay Foster <jayfoster@ieee.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index b3501ae2a3bd1..4fba898b8f4f9 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -546,7 +546,7 @@
 					};
 				};
 
-				uart1 {
+				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
 							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB4 periph A with pullup */
-- 
2.20.1

[PATCH AUTOSEL 4.9 12/64] ARM: dts: exynos: Fix sound in Snow-rev5 Chromebook

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 64858773d78e820003a94e5a7179d368213655d6 ]

This patch adds missing properties to the CODEC and sound nodes, so the
audio will work also on Snow rev5 Chromebook. This patch is an extension
to the commit e9eefc3f8ce0 ("ARM: dts: exynos: Add missing clock and
DAI properties to the max98095 node in Snow Chromebook")
and commit 6ab569936d60 ("ARM: dts: exynos: Enable HDMI audio on Snow
Chromebook").  It has been reported that such changes work fine on the
rev5 board too.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[krzk: Fixed typo in phandle to &max98090]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5250-snow-rev5.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index 90560c316f644..cb986175b69b4 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -23,6 +23,14 @@
 
 		samsung,model = "Snow-I2S-MAX98090";
 		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090 0>, <&hdmi>;
+		};
 	};
 };
 
@@ -34,6 +42,9 @@
 		interrupt-parent = <&gpx0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max98090_irq>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <1>;
 	};
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 13/64] ARM: dts: exynos: Fix regulators configuration on Peach Pi/Pit Chromebooks

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit f8f3b7fc21b1cb59385b780acd9b9a26d04cb7b2 ]

Regulators, which are marked as 'on-in-suspend' seems to be critical for
board operation, thus they must not be disabled anytime. This can be
only assured by marking them as 'always-on', because otherwise some
actions of their clients might result in turning them off. This patch
restores suspend/resume operation on Peach-Pit Chromebook board. It
partially reverts 'always-on' property removal done by the commit
mentioned in the Fixes tag.

Fixes: 665c441eea3d ("ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5420-peach-pit.dts | 3 +++
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 8b754ae8c8f7d..c9d379b1a1669 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -302,6 +302,7 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -323,6 +324,7 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -333,6 +335,7 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 1f90df2d7ecd8..ae58b8d6f6144 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -302,6 +302,7 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -323,6 +324,7 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -333,6 +335,7 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-- 
2.20.1

[PATCH AUTOSEL 4.9 19/64] ARM: dts: pxa: fix power i2c base address

[Sasha Levin]

From: Marcel Ziswiler <marcel@ziswiler.com>

[ Upstream commit 8a1ecc01a473b75ab97be9b36f623e4551a6e9ae ]

There is one too many zeroes in the Power I2C base address. Fix this.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/pxa27x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 9e73dc6b3ed3e..0e1320afa1562 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -70,7 +70,7 @@
 			clocks = <&clks CLK_PWM1>;
 		};
 
-		pwri2c: i2c@40f000180 {
+		pwri2c: i2c@40f00180 {
 			compatible = "mrvl,pxa-i2c";
 			reg = <0x40f00180 0x24>;
 			interrupts = <6>;
-- 
2.20.1

[PATCH AUTOSEL 4.9 23/64] ARM: dts: exynos: Disable pull control for S5M8767 PMIC

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit ef2ecab9af5feae97c47b7f61cdd96f7f49b2c23 ]

S5M8767 PMIC interrupt line on Exynos5250-based Arndale board has
external pull-up resistors, so disable any pull control for it in
in controller node. This fixes support for S5M8767 interrupts and
enables operation of wakeup from S5M8767 RTC alarm.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6098dacd09f11..1b2709af2a42b 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -170,6 +170,8 @@
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq>;
 
 		vinb1-supply = <&main_dc_reg>;
 		vinb2-supply = <&main_dc_reg>;
@@ -547,6 +549,13 @@
 	cap-sd-highspeed;
 };
 
+&pinctrl_0 {
+	s5m8767_irq: s5m8767-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
 &rtc {
 	status = "okay";
 };
-- 
2.20.1

[PATCH AUTOSEL 4.9 27/64] of: make PowerMac cache node search conditional on CONFIG_PPC_PMAC

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit f6707fd6241e483f6fea2caae82d876e422bb11a ]

Cache nodes under the cpu node(s) is PowerMac specific according to the
comment above, so make the code enforce that.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/of/base.c b/drivers/of/base.c
index f366af135d5b7..c66cdc4307fd7 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -2281,7 +2281,7 @@ struct device_node *of_find_next_cache_node(const struct device_node *np)
 	/* OF on pmac has nodes instead of properties named "l2-cache"
 	 * beneath CPU nodes.
 	 */
-	if (!strcmp(np->type, "cpu"))
+	if (IS_ENABLED(CONFIG_PPC_PMAC) && !strcmp(np->type, "cpu"))
 		for_each_child_of_node(np, child)
 			if (!strcmp(child->type, "cache"))
 				return child;
-- 
2.20.1

[PATCH AUTOSEL 4.9 28/64] ARM: dts: omap3-gta04: give spi_lcd node a label so that we can overwrite in other DTS files

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit fa0d7dc355c890725b6178dab0cc11b194203afa ]

needed for device variants based on GTA04 board but with
different display panel (driver).

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index b3a8b1f24499a..95c6ac44e307f 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -70,7 +70,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	spi_lcd {
+	spi_lcd: spi_lcd {
 		compatible = "spi-gpio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
-- 
2.20.1

[PATCH AUTOSEL 4.9 29/64] ARM: dts: omap3-gta04: fixes for tvout / venc

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit f6591391373dbff2c0200e1055d4ff86191578d2 ]

* fix connector compatibility (composite)
* add comment for gpio1 23
* add proper #address-cells
* we use only one venc_out channel for composite

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 95c6ac44e307f..67b50dbe28189 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -122,7 +122,7 @@
 	};
 
 	tv0: connector {
-		compatible = "svideo-connector";
+		compatible = "composite-video-connector";
 		label = "tv";
 
 		port {
@@ -134,7 +134,7 @@
 
 	tv_amp: opa362 {
 		compatible = "ti,opa362";
-		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;	/* GPIO_23 to enable video out amplifier */
 
 		ports {
 			#address-cells = <1>;
@@ -539,10 +539,14 @@
 
 	vdda-supply = <&vdac>;
 
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	port {
+		reg = <0>;
 		venc_out: endpoint {
 			remote-endpoint = <&opa_in>;
-			ti,channels = <2>;
+			ti,channels = <1>;
 			ti,invert-polarity;
 		};
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.9 30/64] ARM: dts: omap3-gta04: tvout: enable as display1 alias

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit 8905592b6e50cec905e6c6035bbd36201a3bfac1 ]

The omap dss susbystem takes the display aliases to find
out which displays exist. To enable tv-out we must define
an alias.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 67b50dbe28189..e86f42086a29b 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -28,6 +28,7 @@
 
 	aliases {
 		display0 = &lcd;
+		display1 = &tv0;
 	};
 
 	gpio-keys {
-- 
2.20.1

[PATCH AUTOSEL 4.9 31/64] ARM: dts: omap3-gta04: fix touchscreen tsc2007

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit 7384a24248eda140a234d356b6c840701ee9f055 ]

we fix penirq polarity, add penirq pinmux and touchscreen
properties.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index e86f42086a29b..6e809b0ff5c9f 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -274,6 +274,13 @@
 			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
 		>;
 	};
+
+	penirq_pins: pinmux_penirq_pins {
+		pinctrl-single,pins = <
+			/* here we could enable to wakeup the cpu from suspend by a pen touch */
+			OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -411,10 +418,19 @@
 	tsc2007@48 {
 		compatible = "ti,tsc2007";
 		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
-		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;	/* GPIO_160 */
 		ti,x-plate-ohms = <600>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <640>;
+		touchscreen-max-pressure = <1000>;
+		touchscreen-fuzz-x = <3>;
+		touchscreen-fuzz-y = <8>;
+		touchscreen-fuzz-pressure = <10>;
+		touchscreen-inverted-y;
 	};
 
 	/* RFID EEPROM */
-- 
2.20.1

[PATCH AUTOSEL 4.9 32/64] ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit fa99c21ecb3cd4021a60d0e8bf880e78b5bd0729 ]

Vendor defined U-Boot has changed the partition scheme a while ago:

* kernel partition 6MB
* file system partition uses the remainder up to end of the NAND
* increased size of the environment partition (to get an OneNAND compatible base address)
* shrink the U-Boot partition

Let's be compatible (e.g. Debian kernel built from upstream).

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 6e809b0ff5c9f..6b8e013e49bb9 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -607,22 +607,22 @@
 
 		bootloaders@80000 {
 			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
+			reg = <0x80000 0x1c0000>;
 		};
 
-		bootloaders_env@260000 {
+		bootloaders_env@240000 {
 			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
+			reg = <0x240000 0x40000>;
 		};
 
 		kernel@280000 {
 			label = "Kernel";
-			reg = <0x280000 0x400000>;
+			reg = <0x280000 0x600000>;
 		};
 
-		filesystem@680000 {
+		filesystem@880000 {
 			label = "File System";
-			reg = <0x680000 0xf980000>;
+			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
 		};
 	};
 };
-- 
2.20.1

[PATCH AUTOSEL 4.9 33/64] ARM: dts: omap3-gta04: keep vpll2 always on

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit 1ae00833e30c9b4af5cbfda65d75b1de12f74013 ]

This is needed to make the display and venc work properly.
Compare to omap3-beagle.dts.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 6b8e013e49bb9..7191506934494 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -536,6 +536,12 @@
 	regulator-max-microvolt = <3150000>;
 };
 
+/* Needed to power the DPI pins */
+
+&vpll2 {
+	regulator-always-on;
+};
+
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = < &dss_dpi_pins >;
-- 
2.20.1

[PATCH AUTOSEL 4.9 52/64] ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value

[Sasha Levin]

From: Christian Lamparter <chunkeey@gmail.com>

[ Upstream commit bd73a3dd257fb838bd456a18eeee0ef0224b7a40 ]

while compiling an ipq4019 target, dtc will complain:
regulator@b089000 unit address format error, expected "2089000"

The saw0 regulator reg value seems to be
copied and pasted from qcom-ipq8064.dtsi.

This patch fixes the reg value to match that of the
unit address which in turn silences the warning.
(There is no driver for qcom,saw2 right now.
So this went unnoticed)

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 4b7d97275c621..5ee84e3cb3e97 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -211,7 +211,7 @@
 
                 saw0: regulator@b089000 {
                         compatible = "qcom,saw2";
-                        reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
                         regulator;
                 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 54/64] ARM: dts: socfpga: Fix I2C bus unit-address error

[Sasha Levin]

From: Dinh Nguyen <dinguyen@kernel.org>

[ Upstream commit cbbc488ed85061a765cf370c3e41f383c1e0add6 ]

dtc has new checks for I2C buses. Fix the warnings in unit-addresses.

arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dtb: Warning (i2c_bus_reg): /soc/i2c@ffc04000/adxl345@0: I2C bus unit address format error, expected "53"

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
index afea3645ada43..89d55894d9162 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -88,7 +88,7 @@
 	status = "okay";
 	speed-mode = <0>;
 
-	adxl345: adxl345@0 {
+	adxl345: adxl345@53 {
 		compatible = "adi,adxl345";
 		reg = <0x53>;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 63/64] ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 131c3eb428ccd5f0c784b9edb4f72ec296a045d2 ]

dtc has new checks for SPI buses. The rk3036 dts file has a node named
spi' which causes false positive warnings. As the node is a pinctrl child
node, change the node name to be 'spi-pins' to fix the warnings.

arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus
arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus

Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index a935523a1eb85..147c73f68f1d9 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -744,7 +744,7 @@
 			/* no rts / cts for uart2 */
 		};
 
-		spi {
+		spi-pins {
 			spi_txd:spi-txd {
 				rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
 			};
-- 
2.20.1