From: "Andreas Färber" <afaerber@suse.de>
To: linux-realtek-soc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, "Andreas Färber" <afaerber@suse.de>,
"Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
devicetree@vger.kernel.org
Subject: [PATCH 3/7] arm64: dts: realtek: rtd129x: Introduce r-bus
Date: Mon, 11 Nov 2019 04:04:30 +0100 [thread overview]
Message-ID: <20191111030434.29977-4-afaerber@suse.de> (raw)
In-Reply-To: <20191111030434.29977-1-afaerber@suse.de>
Model Realtek's register bus in DT.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm64/boot/dts/realtek/rtd129x.dtsi | 136 ++++++++++++++++---------------
1 file changed, 72 insertions(+), 64 deletions(-)
diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
index 8d80cca945bc..c4533a2555aa 100644
--- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
@@ -55,70 +55,78 @@
/* Exclude up to 2 GiB of RAM */
ranges = <0x80000000 0x80000000 0x80000000>;
- reset1: reset-controller@98000000 {
- compatible = "snps,dw-low-reset";
- reg = <0x98000000 0x4>;
- #reset-cells = <1>;
- };
-
- reset2: reset-controller@98000004 {
- compatible = "snps,dw-low-reset";
- reg = <0x98000004 0x4>;
- #reset-cells = <1>;
- };
-
- reset3: reset-controller@98000008 {
- compatible = "snps,dw-low-reset";
- reg = <0x98000008 0x4>;
- #reset-cells = <1>;
- };
-
- reset4: reset-controller@98000050 {
- compatible = "snps,dw-low-reset";
- reg = <0x98000050 0x4>;
- #reset-cells = <1>;
- };
-
- iso_reset: reset-controller@98007088 {
- compatible = "snps,dw-low-reset";
- reg = <0x98007088 0x4>;
- #reset-cells = <1>;
- };
-
- wdt: watchdog@98007680 {
- compatible = "realtek,rtd1295-watchdog";
- reg = <0x98007680 0x100>;
- clocks = <&osc27M>;
- };
-
- uart0: serial@98007800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x98007800 0x400>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <27000000>;
- resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
- status = "disabled";
- };
-
- uart1: serial@9801b200 {
- compatible = "snps,dw-apb-uart";
- reg = <0x9801b200 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <432000000>;
- resets = <&reset2 RTD1295_RSTN_UR1>;
- status = "disabled";
- };
-
- uart2: serial@9801b400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x9801b400 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <432000000>;
- resets = <&reset2 RTD1295_RSTN_UR2>;
- status = "disabled";
+ rbus: r-bus@98000000 {
+ compatible = "simple-bus";
+ reg = <0x98000000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x98000000 0x100000>;
+
+ reset1: reset-controller@0 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset2: reset-controller@4 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x4 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset3: reset-controller@8 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x8 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset4: reset-controller@50 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x50 0x4>;
+ #reset-cells = <1>;
+ };
+
+ iso_reset: reset-controller@7088 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x7088 0x4>;
+ #reset-cells = <1>;
+ };
+
+ wdt: watchdog@7680 {
+ compatible = "realtek,rtd1295-watchdog";
+ reg = <0x7680 0x100>;
+ clocks = <&osc27M>;
+ };
+
+ uart0: serial@7800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x7800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+ status = "disabled";
+ };
+
+ uart1: serial@1b200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1b200 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ resets = <&reset2 RTD1295_RSTN_UR1>;
+ status = "disabled";
+ };
+
+ uart2: serial@1b400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1b400 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ resets = <&reset2 RTD1295_RSTN_UR2>;
+ status = "disabled";
+ };
};
gic: interrupt-controller@ff011000 {
--
2.16.4
next prev parent reply other threads:[~2019-11-11 3:04 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-11 3:04 [PATCH 0/7] arm64: dts: Initial RTD1395 and BPi-M4 support Andreas Färber
2019-11-11 3:04 ` [PATCH 1/7] arm64: dts: realtek: rtd129x: Fix GIC CPU masks for RTD1293 Andreas Färber
2019-11-11 3:04 ` [PATCH 2/7] arm64: dts: realtek: rtd129x: Use reserved-memory for RPC regions Andreas Färber
2019-12-02 8:15 ` Andreas Färber
2019-12-02 9:49 ` James Tai
2019-11-11 3:04 ` Andreas Färber [this message]
2019-11-13 2:42 ` [PATCH 3/7] arm64: dts: realtek: rtd129x: Introduce r-bus James Tai
2019-11-13 3:02 ` James Tai
2019-11-14 23:23 ` Andreas Färber
2019-11-11 3:04 ` [PATCH 4/7] ARM: dts: rtd1195: Fix GIC CPU mask Andreas Färber
2019-11-11 3:04 ` [PATCH 5/7] ARM: dts: rtd1195: Introduce r-bus Andreas Färber
2019-11-13 2:53 ` James Tai
2019-11-15 0:16 ` Andreas Färber
2019-11-18 6:53 ` James Tai
2019-11-19 11:15 ` Andreas Färber
2019-11-20 9:20 ` James Tai
2019-11-15 1:34 ` Rob Herring
2019-11-15 1:51 ` Andreas Färber
2019-11-11 3:04 ` [PATCH 6/7] dt-bindings: arm: realtek: Add RTD1395 and Banana Pi BPI-M4 Andreas Färber
2019-11-14 19:14 ` Rob Herring
2019-11-11 3:04 ` [PATCH 7/7] arm64: dts: realtek: Add RTD1395 and BPi-M4 Andreas Färber
2019-11-13 2:57 ` James Tai
2019-11-15 1:17 ` Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191111030434.29977-4-afaerber@suse.de \
--to=afaerber@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-realtek-soc@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).