From: Benjamin Gaignard <benjamin.gaignard@st.com>
To: <alexandre.torgue@st.com>, <robh+dt@kernel.org>, <mark.rutland@arm.com>
Cc: <linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Benjamin Gaignard <benjamin.gaignard@st.com>
Subject: [PATCH] ARM: dts: stm32: remove "@" from stm32f7 pinmux groups
Date: Mon, 25 Nov 2019 13:12:43 +0100 [thread overview]
Message-ID: <20191125121244.19591-1-benjamin.gaignard@st.com> (raw)
Replace all "@" by "_" in pinmux groups for stm32f7 family.
This avoid errors when using yaml to check the bindings.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 9314128df185..5271df1017cb 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -127,7 +127,7 @@
st,bank-name = "GPIOK";
};
- cec_pins_a: cec@0 {
+ cec_pins_a: cec_0 {
pins {
pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
slew-rate = <0>;
@@ -136,7 +136,7 @@
};
};
- usart1_pins_a: usart1@0 {
+ usart1_pins_a: usart1_0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
@@ -149,7 +149,7 @@
};
};
- usart1_pins_b: usart1@1 {
+ usart1_pins_b: usart1_1 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
@@ -162,7 +162,7 @@
};
};
- i2c1_pins_b: i2c1@0 {
+ i2c1_pins_b: i2c1_0 {
pins {
pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
<STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
@@ -172,7 +172,7 @@
};
};
- usbotg_hs_pins_a: usbotg-hs@0 {
+ usbotg_hs_pins_a: usbotg-hs_0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
<STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -192,7 +192,7 @@
};
};
- usbotg_hs_pins_b: usbotg-hs@1 {
+ usbotg_hs_pins_b: usbotg-hs_1 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
<STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -212,7 +212,7 @@
};
};
- usbotg_fs_pins_a: usbotg-fs@0 {
+ usbotg_fs_pins_a: usbotg-fs_0 {
pins {
pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
<STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
@@ -223,7 +223,7 @@
};
};
- sdio_pins_a: sdio_pins_a@0 {
+ sdio_pins_a: sdio_pins_a_0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
@@ -236,7 +236,7 @@
};
};
- sdio_pins_od_a: sdio_pins_od_a@0 {
+ sdio_pins_od_a: sdio_pins_od_a_0 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
@@ -254,7 +254,7 @@
};
};
- sdio_pins_b: sdio_pins_b@0 {
+ sdio_pins_b: sdio_pins_b_0 {
pins {
pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
<STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
@@ -267,7 +267,7 @@
};
};
- sdio_pins_od_b: sdio_pins_od_b@0 {
+ sdio_pins_od_b: sdio_pins_od_b_0 {
pins1 {
pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
<STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
--
2.15.0
next reply other threads:[~2019-11-25 12:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-25 12:12 Benjamin Gaignard [this message]
2019-11-25 12:12 ` [PATCH] ARM: dts: stm32: remove "@" from stm32f4 pinmux groups Benjamin Gaignard
2019-12-04 15:24 ` Alexandre Torgue
2019-12-04 15:23 ` [PATCH] ARM: dts: stm32: remove "@" from stm32f7 " Alexandre Torgue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191125121244.19591-1-benjamin.gaignard@st.com \
--to=benjamin.gaignard@st.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).