From: Chunyan Zhang <chunyan.zhang@unisoc.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Orson Zhai <orsonzhai@gmail.com>,
Baolin Wang <baolin.wang7@gmail.com>,
Chunyan Zhang <zhang.lyra@gmail.com>,
Chunyan Zhang <chunyan.zhang@unisoc.com>
Subject: [PATCH v3 3/3] arm64: dts: Add Unisoc's SC9863A SoC support
Date: Tue, 26 Nov 2019 16:46:44 +0800 [thread overview]
Message-ID: <20191126084644.17207-4-chunyan.zhang@unisoc.com> (raw)
In-Reply-To: <20191126084644.17207-1-chunyan.zhang@unisoc.com>
Add basic DT to support Unisoc's SC9863A, with this patch,
the board sp9863a-1h10 can run into console.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
arch/arm64/boot/dts/sprd/Makefile | 3 +-
arch/arm64/boot/dts/sprd/sc9863a.dtsi | 526 ++++++++++++++++++++++
arch/arm64/boot/dts/sprd/sharkl3.dtsi | 148 ++++++
arch/arm64/boot/dts/sprd/sp9863a-1h10.dts | 39 ++
4 files changed, 715 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/sprd/sc9863a.dtsi
create mode 100644 arch/arm64/boot/dts/sprd/sharkl3.dtsi
create mode 100644 arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index 2bdc23804f40..f4f1f5148cc2 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
- sp9860g-1h10.dtb
+ sp9860g-1h10.dtb \
+ sp9863a-1h10.dtb
diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
new file mode 100644
index 000000000000..ec3d065f51a3
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
@@ -0,0 +1,526 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A SoC DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "sharkl3.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ core2 {
+ cpu = <&CPU6>;
+ };
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+ CORE_PD: core-pd {
+ compatible = "arm,idle-state";
+ entry-latency-us = <4000>;
+ exit-latency-us = <4000>;
+ min-residency-us = <10000>;
+ local-timer-stop;
+ arm,psci-suspend-param = <0x00010000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ gic: interrupt-controller@14000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ redistributor-stride = <0x0 0x20000>; /* 128KB stride */
+ #redistributor-regions = <1>;
+ interrupt-controller;
+ reg = <0x0 0x14000000 0 0x20000>, /* GICD */
+ <0x0 0x14040000 0 0x100000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ funnel@10001000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0x10001000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ funnel_soc_out_port: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ };
+
+ in-ports {
+ port {
+ funnel_soc_in_port: endpoint {
+ remote-endpoint =
+ <&funnel_ca55_out_port>;
+ };
+ };
+ };
+ };
+
+ etb@10003000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x10003000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint =
+ <&funnel_soc_out_port>;
+ };
+ };
+ };
+ };
+
+ funnel@12001000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0x12001000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ funnel_little_out_port: endpoint {
+ remote-endpoint =
+ <&etf_little_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel_little_in_port0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel_little_in_port1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ funnel_little_in_port2: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ funnel_little_in_port3: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+ };
+
+ etf@12002000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x12002000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etf_little_out: endpoint {
+ remote-endpoint =
+ <&funnel_ca55_in_port0>;
+ };
+ };
+ };
+
+ in-port {
+ port {
+ etf_little_in: endpoint {
+ remote-endpoint =
+ <&funnel_little_out_port>;
+ };
+ };
+ };
+ };
+
+ etf@12003000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x12003000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etf_big_out: endpoint {
+ remote-endpoint =
+ <&funnel_ca55_in_port1>;
+ };
+ };
+ };
+
+ in-ports {
+ port {
+ etf_big_in: endpoint {
+ remote-endpoint =
+ <&funnel_big_out_port>;
+ };
+ };
+ };
+ };
+
+ funnel@12004000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0x12004000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ funnel_ca55_out_port: endpoint {
+ remote-endpoint =
+ <&funnel_soc_in_port>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel_ca55_in_port0: endpoint {
+ remote-endpoint =
+ <&etf_little_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel_ca55_in_port1: endpoint {
+ remote-endpoint =
+ <&etf_big_out>;
+ };
+ };
+ };
+ };
+
+ funnel@12005000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0x12005000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ funnel_big_out_port: endpoint {
+ remote-endpoint =
+ <&etf_big_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel_big_in_port0: endpoint {
+ remote-endpoint = <&etm4_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel_big_in_port1: endpoint {
+ remote-endpoint = <&etm5_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ funnel_big_in_port2: endpoint {
+ remote-endpoint = <&etm6_out>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ funnel_big_in_port3: endpoint {
+ remote-endpoint = <&etm7_out>;
+ };
+ };
+ };
+ };
+
+ etm@13040000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13040000 0 0x1000>;
+ cpu = <&CPU0>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&funnel_little_in_port0>;
+ };
+ };
+ };
+ };
+
+ etm@13140000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13140000 0 0x1000>;
+ cpu = <&CPU1>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&funnel_little_in_port1>;
+ };
+ };
+ };
+ };
+
+ etm@13240000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13240000 0 0x1000>;
+ cpu = <&CPU2>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&funnel_little_in_port2>;
+ };
+ };
+ };
+ };
+
+ etm@13340000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13340000 0 0x1000>;
+ cpu = <&CPU3>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&funnel_little_in_port3>;
+ };
+ };
+ };
+ };
+
+ etm@13440000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13440000 0 0x1000>;
+ cpu = <&CPU4>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&funnel_big_in_port0>;
+ };
+ };
+ };
+ };
+
+ etm@13540000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13540000 0 0x1000>;
+ cpu = <&CPU5>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&funnel_big_in_port1>;
+ };
+ };
+ };
+ };
+
+ etm@13640000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13640000 0 0x1000>;
+ cpu = <&CPU6>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&funnel_big_in_port2>;
+ };
+ };
+ };
+ };
+
+ etm@13740000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13740000 0 0x1000>;
+ cpu = <&CPU7>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&funnel_big_in_port3>;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
new file mode 100644
index 000000000000..3b5a94560481
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc Sharkl3 platform DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ap_ahb_regs: syscon@20e00000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x20e00000 0 0x4000>;
+ };
+
+ pub_ctrl_regs: syscon@300e0000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x300e0000 0 0x4000>;
+ };
+
+ pub_wrap_regs: syscon@300f0000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x300f0000 0 0x1000>;
+ };
+
+ pmu_regs: syscon@402b0000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x402b0000 0 0x4000>;
+ };
+
+ aon_apb_regs: syscon@402e0000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x402e0000 0 0x4000>;
+ };
+
+ anlg_phy_g1_regs: syscon@40350000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x40350000 0 0x3000>;
+ };
+
+ anlg_phy_g2_regs: syscon@40353000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x40353000 0 0x3000>;
+ };
+
+ anlg_phy_g4_regs: syscon@40359000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x40359000 0 0x3000>;
+ };
+
+ anlg_phy_g5_regs: syscon@4035c000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x4035c000 0 0x3000>;
+ };
+
+ anlg_phy_g7_regs: syscon@40363000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x40363000 0 0x3000>;
+ };
+
+ anlg_wrap_wcn_regs: syscon@40366000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x40366000 0 0x3000>;
+ };
+
+ mm_ahb_regs: syscon@60800000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x60800000 0 0x1000>;
+ };
+
+ mm_vsp_ahb_regs: syscon@62000000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x62000000 0 0x1000>;
+ };
+
+ ap_apb_regs: syscon@71300000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon";
+ reg = <0 0x71300000 0 0x4000>;
+ };
+
+ apb@70000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x70000000 0x10000000>;
+
+ uart0: serial@0 {
+ compatible = "sprd,sc9863a-uart",
+ "sprd,sc9836-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart1: serial@100000 {
+ compatible = "sprd,sc9863a-uart",
+ "sprd,sc9836-uart";
+ reg = <0x100000 0x100>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart2: serial@200000 {
+ compatible = "sprd,sc9863a-uart",
+ "sprd,sc9836-uart";
+ reg = <0x200000 0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart3: serial@300000 {
+ compatible = "sprd,sc9863a-uart",
+ "sprd,sc9836-uart";
+ reg = <0x300000 0x100>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart4: serial@400000 {
+ compatible = "sprd,sc9863a-uart",
+ "sprd,sc9836-uart";
+ reg = <0x400000 0x100>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ext_26m: ext-26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "ext-26m";
+ };
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
new file mode 100644
index 000000000000..5c32c1596337
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SP9863A-1h10 boards DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "sc9863a.dtsi"
+
+/ {
+ model = "Spreadtrum SP9863A-1H10 Board";
+
+ compatible = "sprd,sp9863a-1h10", "sprd,sc9863a";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ bootargs = "earlycon";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--
2.20.1
________________________________
This email (including its attachments) is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. Unauthorized use, dissemination, distribution or copying of this email or the information herein or taking any action in reliance on the contents of this email or the information herein, by anyone other than the intended recipient, or an employee or agent responsible for delivering the message to the intended recipient, is strictly prohibited. If you are not the intended recipient, please do not read, copy, use or disclose any part of this e-mail to others. Please notify the sender immediately and permanently delete this e-mail and any attachments if you received it in error. Internet communications cannot be guaranteed to be timely, secure, error-free or virus-free. The sender does not accept liability for any errors or omissions.
本邮件及其附件具有保密性质，受法律保护不得泄露，仅发送给本邮件所指特定收件人。严禁非经授权使用、宣传、发布或复制本邮件或其内容。若非该特定收件人，请勿阅读、复制、 使用或披露本邮件的任何内容。若误收本邮件，请从系统中永久性删除本邮件及所有附件，并以回复邮件的方式即刻告知发件人。无法保证互联网通信及时、安全、无误或防毒。发件人对任何错漏均不承担责任。
prev parent reply other threads:[~2019-11-26 8:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-26 8:46 [PATCH v3 0/3] Add Unisoc's SC9863A support Chunyan Zhang
2019-11-26 8:46 ` [PATCH v3 1/3] dt-bindings: arm: sprd: add global registers bindings Chunyan Zhang
2019-11-26 8:46 ` [PATCH v3 2/3] dt-bindings: arm: move sprd board file to vendor directory Chunyan Zhang
2019-11-26 8:46 ` Chunyan Zhang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191126084644.17207-4-chunyan.zhang@unisoc.com \
--to=chunyan.zhang@unisoc.com \
--cc=baolin.wang7@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=orsonzhai@gmail.com \
--cc=robh+dt@kernel.org \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).