[PATCH] ARM: dts: sh73a0: Add missing clock-frequency for fixed clocks

[Geert Uytterhoeven <geert+renesas@glider.be>]

"clock-frequency" is a required property for devices nodes compatible
with "fixed-clock", leading to warnings when running

    $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/clock/fixed-clock.yaml
    arch/arm/boot/dts/sh73a0-kzm9g.dt.yaml: extcki: 'clock-frequency' is a required property

Fix this by adding the missing "clock-frequency" properties to the various
clocks, to be overridden by the board DTS files when populated.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/sh73a0.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 7efe33c4d041a524..7c67581f57422a26 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -624,19 +624,25 @@
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extcki_clk: extcki {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
 			clock-frequency = <0>;
 		};
 		fsibck_clk: fsibck {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
 			clock-frequency = <0>;
 		};
 
-- 
2.17.1