Re: [PATCH v9 1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller

[Rob Herring <robh@kernel.org>]

On Wed, Dec 11, 2019 at 09:54:41AM +0800, min.guo@mediatek.com wrote:
> From: Min Guo <min.guo@mediatek.com>
> 
> This adds support for MediaTek musb controller in
> host, peripheral and otg mode.
> 
> Signed-off-by: Min Guo <min.guo@mediatek.com>
> ---
> changes in v9:
> 1. Add usb-role-switch
> 2. Remove label of usb connector child node
> 3. Change usb connector child node compatible as "gpio-usb-b-connector", "usb-b-connector";
> 
> changes in v8:
> 1. Add reviewed by Rob
> 
> changes in v7:
> 1. Modify compatible as
> - compatible : should be one of:
>                "mediatek,mt2701-musb"
>                ...
>                followed by "mediatek,mtk-musb"
> 2. Change usb connector child node compatible as "gpio-usb-b-connector" 
> 
> changes in v6:
> 1. Modify usb connector child node
> 
> changes in v5:
> suggested by Rob:
> 1. Modify compatible as 
> - compatible : should be one of:
>                "mediatek,mt-2701"
>                ...
>                followed by "mediatek,mtk-musb"
> 2. Add usb connector child node
> 
> changes in v4:
> suggested by Sergei:
> 1. String alignment
> 
> changes in v3:
> 1. no changes
> 
> changes in v2:
> suggested by Bin:
> 1. Modify DRC to DRD
> suggested by Rob:
> 2. Drop the "<soc-model>-musb" in compatible
> 3. Remove phy-names
> 4. Add space after comma in clock-names
> ---
>  .../devicetree/bindings/usb/mediatek,musb.txt | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt

Reviewed-by: Rob Herring <robh@kernel.org>