Re: [PATCH 1/2] arm64: dts: lx2160a: add MDIO descriptions

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

On Mon, Dec 16, 2019 at 11:34:56AM +0000, Russell King - ARM Linux admin wrote:
> On Mon, Dec 16, 2019 at 11:02:53AM +0000, Russell King - ARM Linux admin wrote:
> > On Wed, Dec 11, 2019 at 03:33:31PM +0800, Shawn Guo wrote:
> > > On Mon, Dec 09, 2019 at 12:00:37PM +0000, Russell King wrote:
> > > > Add MDIO descriptions to the lx2160a dtsi file, so we can use them in
> > > > the SolidRun Clearfog CX platform.
> > > > 
> > > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> > > > ---
> > > >  .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 20 +++++++++++++++++++
> > > >  1 file changed, 20 insertions(+)
> > > > 
> > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > > > index 0bd98f179bfa..617e1f1a2339 100644
> > > > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > > > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > > > @@ -863,6 +863,26 @@
> > > >  			fsl,extts-fifo;
> > > >  		};
> > > >  
> > > > +		emdio1: mdio@8b96000 {
> > > > +			compatible = "fsl,fman-memac-mdio";
> > > > +			reg = <0x00 0x8b96000 0x00 0x1000>;
> > > > +			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> > > > +			little-endian;
> > > > +			#address-cells = <0x01>;
> > > > +			#size-cells = <0x00>;
> > > > +			status = "disabled";
> > > > +		};
> > > > +
> > > > +		emdio2: mdio@8b97000 {
> > > > +			compatible = "fsl,fman-memac-mdio";
> > > > +			reg = <0x00 0x8b97000 0x00 0x1000>;
> > > > +			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> > > > +			little-endian;
> > > > +			#address-cells = <0x01>;
> > > > +			#size-cells = <0x00>;
> > > > +			status = "disabled";
> > > > +		};
> > > > +
> > > 
> > > Ioana Ciornei already had a patch [1] adding emdio1, but unfortunately,
> > > emdio2 was missing from there.
> > > 
> > > Shawn
> > > 
> > > [1] https://lkml.org/lkml/2019/12/4/675
> > 
> > Okay, I'll wait until after the next merge window before resubmitting.
> > Thanks.
> 
> Just to be clear: the reasons are:
> 1) Ioana's patch was _not_ copied to linux-arm-kernel as it should have
>    been.
> 2) I can't download the patch off lkml.org to sanely rebase on top of it
> 3) I'm not hunting around to try and find it on another archive site
> 4) I'm not digging about in random git trees trying to find it.
> 
> This makes it unnecessarily difficult to progress these patches.

Okay, I finally found it at:

https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/patch/?id=6e1b8fae892daa7ffb48570264b8e43b3f807e9a

Note that that was unnecessarily difficult - google was unable to find
it.  Ioana's patch should have been copied to linux-arm-kernel as per
MAINTAINERS, but wasn't.  Is copying the appropriate mailing lists for
a patch now optional?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up