[PATCH RESEND 0/4] Add initial support for RDP474 of IPQ5332 family

[PATCH RESEND 0/4] Add initial support for RDP474 of IPQ5332 family

[Kathiravan T]

Add the initial device tree support for the Reference Design
Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
the support for Console UART, eMMC, I2C and GPIO based buttons.

Most of the features of RDP474 is similar to RDP441, except that the
QDSP will not be used in RDP474, whereas it will be used in the RDP441.

RDP474 comes with the SoC IPQ5300, so add the SoC info support for the
same.

Corrected the RDP number in the subject, so resending it.

Kathiravan T (4):
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
  soc: qcom: socinfo: Add Soc ID for IPQ5300
  dt-bindings: arm: qcom: document MI01.9 board based on IPQ5332 family
  arm64: dts: qcom: ipq5332: add support for the RDP474 variant

 .../devicetree/bindings/arm/qcom.yaml         |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts   | 112 ++++++++++++++++++
 drivers/soc/qcom/socinfo.c                    |   1 +
 include/dt-bindings/arm/qcom,ids.h            |   1 +
 5 files changed, 117 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts

-- 
2.17.1

[PATCH RESEND 1/4] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300

[Kathiravan T]

Add the SoC ID for IPQ5300, which belong to the family of IPQ5332 SoC.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
 include/dt-bindings/arm/qcom,ids.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
index 69c2d8fa79f4..bcbe9ee2cdaf 100644
--- a/include/dt-bindings/arm/qcom,ids.h
+++ b/include/dt-bindings/arm/qcom,ids.h
@@ -258,6 +258,7 @@
 #define QCOM_ID_IPQ5322			593
 #define QCOM_ID_IPQ5312			594
 #define QCOM_ID_IPQ5302			595
+#define QCOM_ID_IPQ5300			624
 
 /*
  * The board type and revision information, used by Qualcomm bootloaders and
-- 
2.17.1

Re: [PATCH RESEND 1/4] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300

[Krzysztof Kozlowski]

On 01/06/2023 06:20, Kathiravan T wrote:
> Add the SoC ID for IPQ5300, which belong to the family of IPQ5332 SoC.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---

This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions. However, there's no need to repost patches *only* to add the
tags. The upstream maintainer will do that for acks received on the
version they apply.

https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540

If a tag was not added on purpose, please state why and what changed.

Best regards,
Krzysztof

Re: [PATCH RESEND 1/4] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300

[Krzysztof Kozlowski]

On 01/06/2023 06:20, Kathiravan T wrote:
> Add the SoC ID for IPQ5300, which belong to the family of IPQ5332 SoC.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
>  include/dt-bindings/arm/qcom,ids.h | 1 +
>  1 file changed, 1 insertion(+)


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH RESEND 2/4] soc: qcom: socinfo: Add Soc ID for IPQ5300

[Kathiravan T]

Add the SoC ID for IPQ5300, which belong to the family of IPQ5332 SoC.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
 drivers/soc/qcom/socinfo.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index dfd4330daef5..c60c9ab321fe 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -411,6 +411,7 @@ static const struct soc_id soc_id[] = {
 	{ qcom_board_id(IPQ5322) },
 	{ qcom_board_id(IPQ5312) },
 	{ qcom_board_id(IPQ5302) },
+	{ qcom_board_id(IPQ5300) },
 };
 
 static const char *socinfo_machine(struct device *dev, unsigned int id)
-- 
2.17.1

Re: [PATCH RESEND 2/4] soc: qcom: socinfo: Add Soc ID for IPQ5300

[Krzysztof Kozlowski]

On 01/06/2023 06:20, Kathiravan T wrote:
> Add the SoC ID for IPQ5300, which belong to the family of IPQ5332 SoC.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
>  drivers/soc/qcom/socinfo.c | 1 +


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH RESEND 3/4] dt-bindings: arm: qcom: document MI01.9 board based on IPQ5332 family

[Kathiravan T]

Document the MI01.9 (Reference Design Platform 474) board based on IPQ5332
family of SoCs.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 8302d1ee280d..9716dd884080 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -93,6 +93,7 @@ description: |
         ap-mi01.2
         ap-mi01.3
         ap-mi01.6
+        ap-mi01.9
         cdp
         cp01-c1
         dragonboard
@@ -340,6 +341,7 @@ properties:
               - qcom,ipq5332-ap-mi01.2
               - qcom,ipq5332-ap-mi01.3
               - qcom,ipq5332-ap-mi01.6
+              - qcom,ipq5332-ap-mi01.9
           - const: qcom,ipq5332
 
       - items:
-- 
2.17.1

Re: [PATCH RESEND 3/4] dt-bindings: arm: qcom: document MI01.9 board based on IPQ5332 family

[Krzysztof Kozlowski]

On 01/06/2023 06:20, Kathiravan T wrote:
> Document the MI01.9 (Reference Design Platform 474) board based on IPQ5332
> family of SoCs.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++

This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions. However, there's no need to repost patches *only* to add the
tags. The upstream maintainer will do that for acks received on the
version they apply.

https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540

If a tag was not added on purpose, please state why and what changed.

Best regards,
Krzysztof

Re: [PATCH RESEND 3/4] dt-bindings: arm: qcom: document MI01.9 board based on IPQ5332 family

[Krzysztof Kozlowski]

On 01/06/2023 06:20, Kathiravan T wrote:
> Document the MI01.9 (Reference Design Platform 474) board based on IPQ5332
> family of SoCs.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH RESEND 4/4] arm64: dts: qcom: ipq5332: add support for the RDP474 variant

[Kathiravan T]

Add the initial device tree support for the Reference Design
Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
the support for Console UART, eMMC, I2C and GPIO based buttons.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile           |   1 +
 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts | 112 ++++++++++++++++++++
 2 files changed, 113 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4f9e81253e18..0f8c763a9bd9 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
new file mode 100644
index 000000000000..085729a0fdf1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP474 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "ipq5332.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
+	compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
+
+	aliases {
+		serial0 = &blsp1_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_i2c1 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo_board {
+	clock-frequency = <24000000>;
+};
+
+/* PINCTRL */
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio35";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio29", "gpio30";
+		function = "blsp1_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
-- 
2.17.1

Re: [PATCH RESEND 4/4] arm64: dts: qcom: ipq5332: add support for the RDP474 variant

[Krzysztof Kozlowski]

On 01/06/2023 06:20, Kathiravan T wrote:
> Add the initial device tree support for the Reference Design
> Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
> the support for Console UART, eMMC, I2C and GPIO based buttons.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile           |   1 +
>  arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts | 112 ++++++++++++++++++++
>  2 files changed, 113 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 4f9e81253e18..0f8c763a9bd9 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> new file mode 100644
> index 000000000000..085729a0fdf1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * IPQ5332 RDP474 board device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "ipq5332.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
> +	compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
> +
> +	aliases {
> +		serial0 = &blsp1_uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0";
> +	};
> +
> +	gpio_keys {

No, srsly, so not only ignored the tags but also feedback?

Best regards,
Krzysztof

Re: [PATCH RESEND 4/4] arm64: dts: qcom: ipq5332: add support for the RDP474 variant

[Kathiravan T]

On 6/1/2023 10:59 PM, Krzysztof Kozlowski wrote:
> On 01/06/2023 06:20, Kathiravan T wrote:
>> Add the initial device tree support for the Reference Design
>> Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
>> the support for Console UART, eMMC, I2C and GPIO based buttons.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile           |   1 +
>>   arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts | 112 ++++++++++++++++++++
>>   2 files changed, 113 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 4f9e81253e18..0f8c763a9bd9 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
>> new file mode 100644
>> index 000000000000..085729a0fdf1
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
>> @@ -0,0 +1,112 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * IPQ5332 RDP474 board device tree source
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include "ipq5332.dtsi"
>> +
>> +/ {
>> +	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
>> +	compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
>> +
>> +	aliases {
>> +		serial0 = &blsp1_uart0;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0";
>> +	};
>> +
>> +	gpio_keys {
> No, srsly, so not only ignored the tags but also feedback?


Please correct me if I am wrong here..

This is RESEND of V1 patches (only minor correction in the subject line 
in cover letter). Also I don't see review comments as such in original 
V1 as well 
https://lore.kernel.org/linux-arm-msm/20230531135048.19164-1-quic_kathirav@quicinc.com/

Can you help to point out your review comments, I couldn't able to find out.

Thanks,


>
> Best regards,
> Krzysztof
>

Re: [PATCH RESEND 4/4] arm64: dts: qcom: ipq5332: add support for the RDP474 variant

[Krzysztof Kozlowski]

On 02/06/2023 06:05, Kathiravan T wrote:
> 
> On 6/1/2023 10:59 PM, Krzysztof Kozlowski wrote:
>> On 01/06/2023 06:20, Kathiravan T wrote:
>>> Add the initial device tree support for the Reference Design
>>> Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
>>> the support for Console UART, eMMC, I2C and GPIO based buttons.
>>>
>>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>>> ---
>>>   arch/arm64/boot/dts/qcom/Makefile           |   1 +
>>>   arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts | 112 ++++++++++++++++++++
>>>   2 files changed, 113 insertions(+)
>>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index 4f9e81253e18..0f8c763a9bd9 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
>>> new file mode 100644
>>> index 000000000000..085729a0fdf1
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
>>> @@ -0,0 +1,112 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * IPQ5332 RDP474 board device tree source
>>> + *
>>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/input/input.h>
>>> +#include "ipq5332.dtsi"
>>> +
>>> +/ {
>>> +	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
>>> +	compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
>>> +
>>> +	aliases {
>>> +		serial0 = &blsp1_uart0;
>>> +	};
>>> +
>>> +	chosen {
>>> +		stdout-path = "serial0";
>>> +	};
>>> +
>>> +	gpio_keys {
>> No, srsly, so not only ignored the tags but also feedback?
> 
> 
> Please correct me if I am wrong here..
> 
> This is RESEND of V1 patches (only minor correction in the subject line

I sent you three emails and I assumed you got my feedback, thus it
should not have been resend...


> in cover letter). Also I don't see review comments as such in original 
> V1 as well 
> https://lore.kernel.org/linux-arm-msm/20230531135048.19164-1-quic_kathirav@quicinc.com/
> 
> Can you help to point out your review comments, I couldn't able to find out.

... but I don't see them on lore. So apparently you also did not get them.

I apologize in such case. Mails are nicely sent in my outbox but
apparently went to /dev/null.

Original feedback:

Same problems as with most of recent patches. No underscores in node names.

Best regards,
Krzysztof

Re: [PATCH RESEND 4/4] arm64: dts: qcom: ipq5332: add support for the RDP474 variant

[Kathiravan T]

On 6/2/2023 12:34 PM, Krzysztof Kozlowski wrote:
> On 02/06/2023 06:05, Kathiravan T wrote:
>> On 6/1/2023 10:59 PM, Krzysztof Kozlowski wrote:
>>> On 01/06/2023 06:20, Kathiravan T wrote:
>>>> Add the initial device tree support for the Reference Design
>>>> Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
>>>> the support for Console UART, eMMC, I2C and GPIO based buttons.
>>>>
>>>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>>>> ---
>>>>    arch/arm64/boot/dts/qcom/Makefile           |   1 +
>>>>    arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts | 112 ++++++++++++++++++++
>>>>    2 files changed, 113 insertions(+)
>>>>    create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>>> index 4f9e81253e18..0f8c763a9bd9 100644
>>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>>> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
>>>> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
>>>> new file mode 100644
>>>> index 000000000000..085729a0fdf1
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
>>>> @@ -0,0 +1,112 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * IPQ5332 RDP474 board device tree source
>>>> + *
>>>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include <dt-bindings/gpio/gpio.h>
>>>> +#include <dt-bindings/input/input.h>
>>>> +#include "ipq5332.dtsi"
>>>> +
>>>> +/ {
>>>> +	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
>>>> +	compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
>>>> +
>>>> +	aliases {
>>>> +		serial0 = &blsp1_uart0;
>>>> +	};
>>>> +
>>>> +	chosen {
>>>> +		stdout-path = "serial0";
>>>> +	};
>>>> +
>>>> +	gpio_keys {
>>> No, srsly, so not only ignored the tags but also feedback?
>>
>> Please correct me if I am wrong here..
>>
>> This is RESEND of V1 patches (only minor correction in the subject line
> I sent you three emails and I assumed you got my feedback, thus it
> should not have been resend...
>
>
>> in cover letter). Also I don't see review comments as such in original
>> V1 as well
>> https://lore.kernel.org/linux-arm-msm/20230531135048.19164-1-quic_kathirav@quicinc.com/
>>
>> Can you help to point out your review comments, I couldn't able to find out.
> ... but I don't see them on lore. So apparently you also did not get them.
>
> I apologize in such case. Mails are nicely sent in my outbox but
> apparently went to /dev/null.
>
> Original feedback:
>
> Same problems as with most of recent patches. No underscores in node names.


Ack. Will fix it in next spin.


> Best regards,
> Krzysztof
>