* [RESEND PATCHv4 01/14] dt-bindings: remoteproc: Add OMAP remoteproc bindings [not found] <20200102131845.12992-2-t-kristo@ti.com> @ 2020-01-02 13:25 ` Tero Kristo 2020-01-03 23:38 ` Rob Herring 2020-01-08 16:49 ` Suman Anna 0 siblings, 2 replies; 7+ messages in thread From: Tero Kristo @ 2020-01-02 13:25 UTC (permalink / raw) To: bjorn.andersson, ohad, linux-remoteproc Cc: linux-kernel, mathieu.poirier, linux-omap, s-anna, Rob Herring, devicetree, Tero Kristo From: Suman Anna <s-anna@ti.com> Add the device tree bindings document for the IPU and DSP remote processor devices on OMAP4+ SoCs. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Suman Anna <s-anna@ti.com> [t-kristo@ti.com: converted to schema] Signed-off-by: Tero Kristo <t-kristo@ti.com> --- v4: added ti,bootreg-shift and ti,autosuspend-delay properties .../remoteproc/ti,omap-remoteproc.yaml | 329 ++++++++++++++++++ 1 file changed, 329 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml new file mode 100644 index 000000000000..f53d58efaae3 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml @@ -0,0 +1,329 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP4+ Remoteproc Devices + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: + The OMAP family of SoCs usually have one or more slave processor sub-systems + that are used to offload some of the processor-intensive tasks, or to manage + other hardware accelerators, for achieving various system level goals. + + The processor cores in the sub-system are usually behind an IOMMU, and may + contain additional sub-modules like Internal RAM and/or ROMs, L1 and/or L2 + caches, an Interrupt Controller, a Cache Controller etc. + + The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor + sub-system. The DSP processor sub-system can contain any of the TI's C64x, + C66x or C67x family of DSP cores as the main execution unit. The IPU processor + sub-system usually contains either a Dual-Core Cortex-M3 or Dual-Core + Cortex-M4 processors. + + Each remote processor sub-system is represented as a single DT node. Each node + has a number of required or optional properties that enable the OS running on + the host processor (MPU) to perform the device management of the remote + processor and to communicate with the remote processor. The various properties + can be classified as constant or variable. The constant properties are + dictated by the SoC and does not change from one board to another having the + same SoC. Examples of constant properties include 'iommus', 'reg'. The + variable properties are dictated by the system integration aspects such as + memory on the board, or configuration used within the corresponding firmware + image. Examples of variable properties include 'mboxes', 'memory-region', + 'timers', 'watchdog-timers' etc. + +properties: + compatible: + enum: + - ti,omap4-dsp + - ti,omap5-dsp + - ti,dra7-dsp + - ti,omap4-ipu + - ti,omap5-ipu + - ti,dra7-ipu + + iommus: + minItems: 1 + maxItems: 2 + description: | + phandles to OMAP IOMMU nodes, that need to be programmed + for this remote processor to access any external RAM memory or + other peripheral device address spaces. This property usually + has only a single phandle. Multiple phandles are used only in + cases where the sub-system has different ports for different + sub-modules within the processor sub-system (eg: DRA7 DSPs), + and need the same programming in both the MMUs. + + mboxes: + minItems: 1 + maxItems: 2 + description: | + OMAP Mailbox specifier denoting the sub-mailbox, to be used for + communication with the remote processor. The specifier format is + as per the bindings, + Documentation/devicetree/bindings/mailbox/omap-mailbox.txt + This property should match with the sub-mailbox node used in + the firmware image. + + clocks: + description: | + Main functional clock for the remote processor + + resets: + description: | + Reset handles for the remote processor + + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to the reserved memory node to be associated + with the remoteproc device. The reserved memory node + can be a CMA memory node, and should be defined as + per the bindings, + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + + firmware-name: + description: | + Default name of the firmware to load to the remote processor. + +# Optional properties: +# -------------------- +# Some of these properties are mandatory on some SoCs, and some are optional +# depending on the configuration of the firmware image to be executed on the +# remote processor. The conditions are mentioned for each property. +# +# The following are the optional properties: + + reg: + description: | + Address space for any remoteproc memories present on + the SoC. Should contain an entry for each value in + 'reg-names'. These are mandatory for all DSP and IPU + processors that have them (OMAP4/OMAP5 DSPs do not have + any RAMs) + + reg-names: + description: | + Required names for each of the address spaces defined in + the 'reg' property. Should contain a string from among + the following names, each representing the corresponding + internal RAM memory region. + minItems: 1 + maxItems: 3 + items: + - const: l2ram + - const: l1pram + - const: l1dram + + ti,bootreg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Should be a pair of the phandle to the System Control + Configuration region that contains the boot address + register, and the register offset of the boot address + register within the System Control module. This property + is required for all the DSP instances on OMAP4, OMAP5 + and DRA7xx SoCs. + + ti,bootreg-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Describes the bit position of the boot address field within + the ti,bootreg. + + ti,autosuspend-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Custom autosuspend delay for the remoteproc in milliseconds. + + ti,timers: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + One or more phandles to OMAP DMTimer nodes, that serve + as System/Tick timers for the OS running on the remote + processors. This will usually be a single timer if the + processor sub-system is running in SMP mode, or one per + core in the processor sub-system. This can also be used + to reserve specific timers to be dedicated to the + remote processors. + + This property is mandatory on remote processors requiring + external tick wakeup, and to support Power Management + features. The timers to be used should match with the + timers used in the firmware image. + + ti,watchdog-timers: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + One or more phandles to OMAP DMTimer nodes, used to + serve as Watchdog timers for the processor cores. This + will usually be one per executing processor core, even + if the processor sub-system is running a SMP OS. + + The timers to be used should match with the watchdog + timers used in the firmware image. + +if: + properties: + compatible: + enum: + - ti,dra7-dsp +then: + properties: + reg: + minItems: 3 + maxItems: 3 + ti,bootreg: + minItems: 1 + maxItems: 1 + ti,bootreg-shift: + minItems: 1 + maxItems: 1 + +else: + if: + properties: + compatible: + enum: + - ti,omap4-ipu + - ti,omap5-ipu + - ti,dra7-ipu + then: + properties: + reg: + minItems: 1 + maxItems: 1 + + else: + properties: + reg: + maxItems: 0 + ti,bootreg: + minItems: 1 + maxItems: 1 + +required: + - compatible + - iommus + - mboxes + - memory-region + - clocks + - resets + - firmware-name + +additionalProperties: false + +examples: + - | + + //Example 1: OMAP4 DSP + + /* DSP Reserved Memory node */ + #include <dt-bindings/clock/omap4.h> + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + + dsp_memory_region: dsp-memory@98000000 { + compatible = "shared-dma-pool"; + reg = <0x98000000 0x800000>; + reusable; + }; + }; + + /* DSP node */ + ocp { + dsp: dsp { + compatible = "ti,omap4-dsp"; + ti,bootreg = <&scm_conf 0x304>; + iommus = <&mmu_dsp>; + mboxes = <&mailbox &mbox_dsp>; + memory-region = <&dsp_memory_region>; + ti,timers = <&timer5>; + ti,watchdog-timers = <&timer6>; + clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; + resets = <&prm_tesla 0>, <&prm_tesla 1>; + firmware-name = "omap4-dsp-fw.xe64T"; + }; + }; + + - |+ + + //Example 2: OMAP5 IPU + + /* IPU Reserved Memory node */ + #include <dt-bindings/clock/omap5.h> + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + ipu_memory_region: ipu-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0 0x95800000 0 0x3800000>; + reusable; + }; + }; + + /* IPU node */ + ocp { + #address-cells = <1>; + #size-cells = <1>; + + ipu: ipu@55020000 { + compatible = "ti,omap5-ipu"; + reg = <0x55020000 0x10000>; + reg-names = "l2ram"; + iommus = <&mmu_ipu>; + mboxes = <&mailbox &mbox_ipu>; + memory-region = <&ipu_memory_region>; + ti,timers = <&timer3>, <&timer4>; + ti,watchdog-timers = <&timer9>, <&timer11>; + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; + resets = <&prm_core 2>; + firmware-name = "omap5-ipu-fw.xem"; + }; + }; + + - |+ + + //Example 3: DRA7xx/AM57xx DSP + + /* DSP1 Reserved Memory node */ + #include <dt-bindings/clock/dra7.h> + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + }; + }; + + /* DSP1 node */ + ocp { + #address-cells = <1>; + #size-cells = <1>; + + dsp1: dsp@40800000 { + compatible = "ti,dra7-dsp"; + reg = <0x40800000 0x48000>, + <0x40e00000 0x8000>, + <0x40f00000 0x8000>; + reg-names = "l2ram", "l1pram", "l1dram"; + ti,bootreg = <&scm_conf 0x55c>; + iommus = <&mmu0_dsp1>, <&mmu1_dsp1>; + mboxes = <&mailbox5 &mbox_dsp1_ipc3x>; + memory-region = <&dsp1_memory_region>; + ti,timers = <&timer5>; + ti,watchdog-timers = <&timer10>; + resets = <&prm_dsp1 0>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + firmware-name = "dra7-dsp1-fw.xe66"; + }; + }; -- 2.17.1 -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [RESEND PATCHv4 01/14] dt-bindings: remoteproc: Add OMAP remoteproc bindings 2020-01-02 13:25 ` [RESEND PATCHv4 01/14] dt-bindings: remoteproc: Add OMAP remoteproc bindings Tero Kristo @ 2020-01-03 23:38 ` Rob Herring 2020-01-07 11:01 ` Tero Kristo 2020-01-08 16:49 ` Suman Anna 1 sibling, 1 reply; 7+ messages in thread From: Rob Herring @ 2020-01-03 23:38 UTC (permalink / raw) To: Tero Kristo Cc: bjorn.andersson, ohad, linux-remoteproc, linux-kernel, mathieu.poirier, linux-omap, s-anna, devicetree On Thu, Jan 02, 2020 at 03:25:12PM +0200, Tero Kristo wrote: > From: Suman Anna <s-anna@ti.com> > > Add the device tree bindings document for the IPU and DSP > remote processor devices on OMAP4+ SoCs. > > Cc: Rob Herring <robh@kernel.org> > Cc: devicetree@vger.kernel.org > Signed-off-by: Suman Anna <s-anna@ti.com> > [t-kristo@ti.com: converted to schema] > Signed-off-by: Tero Kristo <t-kristo@ti.com> > --- > v4: added ti,bootreg-shift and ti,autosuspend-delay properties > > .../remoteproc/ti,omap-remoteproc.yaml | 329 ++++++++++++++++++ > 1 file changed, 329 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml > > diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml > new file mode 100644 > index 000000000000..f53d58efaae3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml > @@ -0,0 +1,329 @@ > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: OMAP4+ Remoteproc Devices > + > +maintainers: > + - Suman Anna <s-anna@ti.com> > + > +description: > + The OMAP family of SoCs usually have one or more slave processor sub-systems > + that are used to offload some of the processor-intensive tasks, or to manage > + other hardware accelerators, for achieving various system level goals. > + > + The processor cores in the sub-system are usually behind an IOMMU, and may > + contain additional sub-modules like Internal RAM and/or ROMs, L1 and/or L2 > + caches, an Interrupt Controller, a Cache Controller etc. > + > + The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor > + sub-system. The DSP processor sub-system can contain any of the TI's C64x, > + C66x or C67x family of DSP cores as the main execution unit. The IPU processor > + sub-system usually contains either a Dual-Core Cortex-M3 or Dual-Core > + Cortex-M4 processors. > + > + Each remote processor sub-system is represented as a single DT node. Each node > + has a number of required or optional properties that enable the OS running on > + the host processor (MPU) to perform the device management of the remote > + processor and to communicate with the remote processor. The various properties > + can be classified as constant or variable. The constant properties are > + dictated by the SoC and does not change from one board to another having the > + same SoC. Examples of constant properties include 'iommus', 'reg'. The > + variable properties are dictated by the system integration aspects such as > + memory on the board, or configuration used within the corresponding firmware > + image. Examples of variable properties include 'mboxes', 'memory-region', > + 'timers', 'watchdog-timers' etc. > + > +properties: > + compatible: > + enum: > + - ti,omap4-dsp > + - ti,omap5-dsp > + - ti,dra7-dsp > + - ti,omap4-ipu > + - ti,omap5-ipu > + - ti,dra7-ipu > + > + iommus: > + minItems: 1 > + maxItems: 2 > + description: | > + phandles to OMAP IOMMU nodes, that need to be programmed > + for this remote processor to access any external RAM memory or > + other peripheral device address spaces. This property usually > + has only a single phandle. Multiple phandles are used only in > + cases where the sub-system has different ports for different > + sub-modules within the processor sub-system (eg: DRA7 DSPs), > + and need the same programming in both the MMUs. > + > + mboxes: > + minItems: 1 > + maxItems: 2 > + description: | > + OMAP Mailbox specifier denoting the sub-mailbox, to be used for > + communication with the remote processor. The specifier format is > + as per the bindings, > + Documentation/devicetree/bindings/mailbox/omap-mailbox.txt > + This property should match with the sub-mailbox node used in > + the firmware image. > + > + clocks: > + description: | > + Main functional clock for the remote processor > + > + resets: > + description: | > + Reset handles for the remote processor > + > + memory-region: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: | > + phandle to the reserved memory node to be associated > + with the remoteproc device. The reserved memory node > + can be a CMA memory node, and should be defined as > + per the bindings, > + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt > + > + firmware-name: > + description: | > + Default name of the firmware to load to the remote processor. > + > +# Optional properties: > +# -------------------- > +# Some of these properties are mandatory on some SoCs, and some are optional > +# depending on the configuration of the firmware image to be executed on the > +# remote processor. The conditions are mentioned for each property. > +# > +# The following are the optional properties: > + > + reg: > + description: | > + Address space for any remoteproc memories present on > + the SoC. Should contain an entry for each value in > + 'reg-names'. These are mandatory for all DSP and IPU > + processors that have them (OMAP4/OMAP5 DSPs do not have > + any RAMs) > + > + reg-names: > + description: | > + Required names for each of the address spaces defined in > + the 'reg' property. Should contain a string from among > + the following names, each representing the corresponding > + internal RAM memory region. The schema is more constrained than 'a string from among the following names'. 'l2ram' is the only valid 1st entry for example. > + minItems: 1 > + maxItems: 3 > + items: > + - const: l2ram > + - const: l1pram > + - const: l1dram > + > + ti,bootreg: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: | > + Should be a pair of the phandle to the System Control > + Configuration region that contains the boot address > + register, and the register offset of the boot address > + register within the System Control module. This property > + is required for all the DSP instances on OMAP4, OMAP5 > + and DRA7xx SoCs. > + > + ti,bootreg-shift: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Describes the bit position of the boot address field within > + the ti,bootreg. Just make this a 2nd cell value for ti,bootreg. There's nothing to gain with 2 properties. > + > + ti,autosuspend-delay: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Custom autosuspend delay for the remoteproc in milliseconds. Needs a standard unit suffix and then you can drop the type. > + > + ti,timers: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: | > + One or more phandles to OMAP DMTimer nodes, that serve > + as System/Tick timers for the OS running on the remote > + processors. This will usually be a single timer if the > + processor sub-system is running in SMP mode, or one per > + core in the processor sub-system. This can also be used > + to reserve specific timers to be dedicated to the > + remote processors. > + > + This property is mandatory on remote processors requiring > + external tick wakeup, and to support Power Management > + features. The timers to be used should match with the > + timers used in the firmware image. > + > + ti,watchdog-timers: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: | > + One or more phandles to OMAP DMTimer nodes, used to > + serve as Watchdog timers for the processor cores. This > + will usually be one per executing processor core, even > + if the processor sub-system is running a SMP OS. > + > + The timers to be used should match with the watchdog > + timers used in the firmware image. > + > +if: > + properties: > + compatible: > + enum: > + - ti,dra7-dsp > +then: > + properties: > + reg: > + minItems: 3 > + maxItems: 3 > + ti,bootreg: > + minItems: 1 > + maxItems: 1 What are you trying to express here? That ti,bootreg is only 1 phandle+args or it's only a phandle (with no arg cells)? This does the former (I think), but I'm not clear when it would be more than 1. > + ti,bootreg-shift: > + minItems: 1 > + maxItems: 1 > + > +else: > + if: > + properties: > + compatible: > + enum: > + - ti,omap4-ipu > + - ti,omap5-ipu > + - ti,dra7-ipu > + then: > + properties: > + reg: > + minItems: 1 > + maxItems: 1 > + > + else: > + properties: > + reg: > + maxItems: 0 This is not how you express 'reg' is not present. You want 'reg: false'. Also, I assume for some compatibles, 'reg' is required which you haven't expressed. > + ti,bootreg: > + minItems: 1 > + maxItems: 1 > + > +required: > + - compatible > + - iommus > + - mboxes > + - memory-region > + - clocks > + - resets > + - firmware-name > + > +additionalProperties: false > + > +examples: > + - | > + > + //Example 1: OMAP4 DSP > + > + /* DSP Reserved Memory node */ > + #include <dt-bindings/clock/omap4.h> > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + > + dsp_memory_region: dsp-memory@98000000 { > + compatible = "shared-dma-pool"; > + reg = <0x98000000 0x800000>; > + reusable; > + }; > + }; > + > + /* DSP node */ > + ocp { > + dsp: dsp { > + compatible = "ti,omap4-dsp"; > + ti,bootreg = <&scm_conf 0x304>; > + iommus = <&mmu_dsp>; > + mboxes = <&mailbox &mbox_dsp>; > + memory-region = <&dsp_memory_region>; > + ti,timers = <&timer5>; > + ti,watchdog-timers = <&timer6>; > + clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; > + resets = <&prm_tesla 0>, <&prm_tesla 1>; > + firmware-name = "omap4-dsp-fw.xe64T"; > + }; > + }; > + > + - |+ > + > + //Example 2: OMAP5 IPU > + > + /* IPU Reserved Memory node */ > + #include <dt-bindings/clock/omap5.h> > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + > + ipu_memory_region: ipu-memory@95800000 { > + compatible = "shared-dma-pool"; > + reg = <0 0x95800000 0 0x3800000>; > + reusable; > + }; > + }; > + > + /* IPU node */ > + ocp { > + #address-cells = <1>; > + #size-cells = <1>; > + > + ipu: ipu@55020000 { > + compatible = "ti,omap5-ipu"; > + reg = <0x55020000 0x10000>; > + reg-names = "l2ram"; > + iommus = <&mmu_ipu>; > + mboxes = <&mailbox &mbox_ipu>; > + memory-region = <&ipu_memory_region>; > + ti,timers = <&timer3>, <&timer4>; > + ti,watchdog-timers = <&timer9>, <&timer11>; > + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; > + resets = <&prm_core 2>; > + firmware-name = "omap5-ipu-fw.xem"; > + }; > + }; > + > + - |+ > + > + //Example 3: DRA7xx/AM57xx DSP > + > + /* DSP1 Reserved Memory node */ > + #include <dt-bindings/clock/dra7.h> > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + > + dsp1_memory_region: dsp1-memory@99000000 { > + compatible = "shared-dma-pool"; > + reg = <0x0 0x99000000 0x0 0x4000000>; > + reusable; > + }; > + }; > + > + /* DSP1 node */ > + ocp { > + #address-cells = <1>; > + #size-cells = <1>; > + > + dsp1: dsp@40800000 { > + compatible = "ti,dra7-dsp"; > + reg = <0x40800000 0x48000>, > + <0x40e00000 0x8000>, > + <0x40f00000 0x8000>; > + reg-names = "l2ram", "l1pram", "l1dram"; > + ti,bootreg = <&scm_conf 0x55c>; > + iommus = <&mmu0_dsp1>, <&mmu1_dsp1>; > + mboxes = <&mailbox5 &mbox_dsp1_ipc3x>; > + memory-region = <&dsp1_memory_region>; > + ti,timers = <&timer5>; > + ti,watchdog-timers = <&timer10>; > + resets = <&prm_dsp1 0>; > + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; > + firmware-name = "dra7-dsp1-fw.xe66"; > + }; > + }; > -- > 2.17.1 > > -- > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESEND PATCHv4 01/14] dt-bindings: remoteproc: Add OMAP remoteproc bindings 2020-01-03 23:38 ` Rob Herring @ 2020-01-07 11:01 ` Tero Kristo 2020-01-07 15:48 ` Rob Herring 0 siblings, 1 reply; 7+ messages in thread From: Tero Kristo @ 2020-01-07 11:01 UTC (permalink / raw) To: Rob Herring Cc: bjorn.andersson, ohad, linux-remoteproc, linux-kernel, mathieu.poirier, linux-omap, s-anna, devicetree On 04/01/2020 01:38, Rob Herring wrote: > On Thu, Jan 02, 2020 at 03:25:12PM +0200, Tero Kristo wrote: >> From: Suman Anna <s-anna@ti.com> >> >> Add the device tree bindings document for the IPU and DSP >> remote processor devices on OMAP4+ SoCs. >> >> Cc: Rob Herring <robh@kernel.org> >> Cc: devicetree@vger.kernel.org >> Signed-off-by: Suman Anna <s-anna@ti.com> >> [t-kristo@ti.com: converted to schema] >> Signed-off-by: Tero Kristo <t-kristo@ti.com> >> --- >> v4: added ti,bootreg-shift and ti,autosuspend-delay properties >> >> .../remoteproc/ti,omap-remoteproc.yaml | 329 ++++++++++++++++++ >> 1 file changed, 329 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml >> >> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml >> new file mode 100644 >> index 000000000000..f53d58efaae3 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml >> @@ -0,0 +1,329 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: OMAP4+ Remoteproc Devices >> + >> +maintainers: >> + - Suman Anna <s-anna@ti.com> >> + >> +description: >> + The OMAP family of SoCs usually have one or more slave processor sub-systems >> + that are used to offload some of the processor-intensive tasks, or to manage >> + other hardware accelerators, for achieving various system level goals. >> + >> + The processor cores in the sub-system are usually behind an IOMMU, and may >> + contain additional sub-modules like Internal RAM and/or ROMs, L1 and/or L2 >> + caches, an Interrupt Controller, a Cache Controller etc. >> + >> + The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor >> + sub-system. The DSP processor sub-system can contain any of the TI's C64x, >> + C66x or C67x family of DSP cores as the main execution unit. The IPU processor >> + sub-system usually contains either a Dual-Core Cortex-M3 or Dual-Core >> + Cortex-M4 processors. >> + >> + Each remote processor sub-system is represented as a single DT node. Each node >> + has a number of required or optional properties that enable the OS running on >> + the host processor (MPU) to perform the device management of the remote >> + processor and to communicate with the remote processor. The various properties >> + can be classified as constant or variable. The constant properties are >> + dictated by the SoC and does not change from one board to another having the >> + same SoC. Examples of constant properties include 'iommus', 'reg'. The >> + variable properties are dictated by the system integration aspects such as >> + memory on the board, or configuration used within the corresponding firmware >> + image. Examples of variable properties include 'mboxes', 'memory-region', >> + 'timers', 'watchdog-timers' etc. >> + >> +properties: >> + compatible: >> + enum: >> + - ti,omap4-dsp >> + - ti,omap5-dsp >> + - ti,dra7-dsp >> + - ti,omap4-ipu >> + - ti,omap5-ipu >> + - ti,dra7-ipu >> + >> + iommus: >> + minItems: 1 >> + maxItems: 2 >> + description: | >> + phandles to OMAP IOMMU nodes, that need to be programmed >> + for this remote processor to access any external RAM memory or >> + other peripheral device address spaces. This property usually >> + has only a single phandle. Multiple phandles are used only in >> + cases where the sub-system has different ports for different >> + sub-modules within the processor sub-system (eg: DRA7 DSPs), >> + and need the same programming in both the MMUs. >> + >> + mboxes: >> + minItems: 1 >> + maxItems: 2 >> + description: | >> + OMAP Mailbox specifier denoting the sub-mailbox, to be used for >> + communication with the remote processor. The specifier format is >> + as per the bindings, >> + Documentation/devicetree/bindings/mailbox/omap-mailbox.txt >> + This property should match with the sub-mailbox node used in >> + the firmware image. >> + >> + clocks: >> + description: | >> + Main functional clock for the remote processor >> + >> + resets: >> + description: | >> + Reset handles for the remote processor >> + >> + memory-region: >> + $ref: /schemas/types.yaml#/definitions/phandle >> + description: | >> + phandle to the reserved memory node to be associated >> + with the remoteproc device. The reserved memory node >> + can be a CMA memory node, and should be defined as >> + per the bindings, >> + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt >> + >> + firmware-name: >> + description: | >> + Default name of the firmware to load to the remote processor. >> + >> +# Optional properties: >> +# -------------------- >> +# Some of these properties are mandatory on some SoCs, and some are optional >> +# depending on the configuration of the firmware image to be executed on the >> +# remote processor. The conditions are mentioned for each property. >> +# >> +# The following are the optional properties: >> + >> + reg: >> + description: | >> + Address space for any remoteproc memories present on >> + the SoC. Should contain an entry for each value in >> + 'reg-names'. These are mandatory for all DSP and IPU >> + processors that have them (OMAP4/OMAP5 DSPs do not have >> + any RAMs) >> + >> + reg-names: >> + description: | >> + Required names for each of the address spaces defined in >> + the 'reg' property. Should contain a string from among >> + the following names, each representing the corresponding >> + internal RAM memory region. > > The schema is more constrained than 'a string from among the following > names'. 'l2ram' is the only valid 1st entry for example. Right, I wasn't able to figure out a way to make the schema more flexible, so I will just modify the description above. > >> + minItems: 1 >> + maxItems: 3 >> + items: >> + - const: l2ram >> + - const: l1pram >> + - const: l1dram >> + >> + ti,bootreg: >> + $ref: /schemas/types.yaml#/definitions/phandle-array >> + description: | >> + Should be a pair of the phandle to the System Control >> + Configuration region that contains the boot address >> + register, and the register offset of the boot address >> + register within the System Control module. This property >> + is required for all the DSP instances on OMAP4, OMAP5 >> + and DRA7xx SoCs. >> + >> + ti,bootreg-shift: >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: | >> + Describes the bit position of the boot address field within >> + the ti,bootreg. > > Just make this a 2nd cell value for ti,bootreg. There's nothing to gain > with 2 properties. Ok. > >> + >> + ti,autosuspend-delay: >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: | >> + Custom autosuspend delay for the remoteproc in milliseconds. > > Needs a standard unit suffix and then you can drop the type. Yeah, that seems to work. > >> + >> + ti,timers: >> + $ref: /schemas/types.yaml#/definitions/phandle-array >> + description: | >> + One or more phandles to OMAP DMTimer nodes, that serve >> + as System/Tick timers for the OS running on the remote >> + processors. This will usually be a single timer if the >> + processor sub-system is running in SMP mode, or one per >> + core in the processor sub-system. This can also be used >> + to reserve specific timers to be dedicated to the >> + remote processors. >> + >> + This property is mandatory on remote processors requiring >> + external tick wakeup, and to support Power Management >> + features. The timers to be used should match with the >> + timers used in the firmware image. >> + >> + ti,watchdog-timers: >> + $ref: /schemas/types.yaml#/definitions/phandle-array >> + description: | >> + One or more phandles to OMAP DMTimer nodes, used to >> + serve as Watchdog timers for the processor cores. This >> + will usually be one per executing processor core, even >> + if the processor sub-system is running a SMP OS. >> + >> + The timers to be used should match with the watchdog >> + timers used in the firmware image. >> + >> +if: >> + properties: >> + compatible: >> + enum: >> + - ti,dra7-dsp >> +then: >> + properties: >> + reg: >> + minItems: 3 >> + maxItems: 3 >> + ti,bootreg: >> + minItems: 1 >> + maxItems: 1 > > What are you trying to express here? That ti,bootreg is only 1 > phandle+args or it's only a phandle (with no arg cells)? This does the > former (I think), but I'm not clear when it would be more than 1. Yeah, ti,bootreg is only a single entry of a phandle + args. However, it seems like this tweak does not work, so I will just drop it. > >> + ti,bootreg-shift: >> + minItems: 1 >> + maxItems: 1 >> + >> +else: >> + if: >> + properties: >> + compatible: >> + enum: >> + - ti,omap4-ipu >> + - ti,omap5-ipu >> + - ti,dra7-ipu >> + then: >> + properties: >> + reg: >> + minItems: 1 >> + maxItems: 1 >> + >> + else: >> + properties: >> + reg: >> + maxItems: 0 > > This is not how you express 'reg' is not present. You want 'reg: false'. Ok will fix this. > Also, I assume for some compatibles, 'reg' is required which you haven't > expressed. Hmm, ok, I was assuming just setting the min/maxItems does this but it doesn't, I'll extend the required prop based on compatible for the ones that need them. -Tero > >> + ti,bootreg: >> + minItems: 1 >> + maxItems: 1 >> + >> +required: >> + - compatible >> + - iommus >> + - mboxes >> + - memory-region >> + - clocks >> + - resets >> + - firmware-name >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + >> + //Example 1: OMAP4 DSP >> + >> + /* DSP Reserved Memory node */ >> + #include <dt-bindings/clock/omap4.h> >> + reserved-memory { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + dsp_memory_region: dsp-memory@98000000 { >> + compatible = "shared-dma-pool"; >> + reg = <0x98000000 0x800000>; >> + reusable; >> + }; >> + }; >> + >> + /* DSP node */ >> + ocp { >> + dsp: dsp { >> + compatible = "ti,omap4-dsp"; >> + ti,bootreg = <&scm_conf 0x304>; >> + iommus = <&mmu_dsp>; >> + mboxes = <&mailbox &mbox_dsp>; >> + memory-region = <&dsp_memory_region>; >> + ti,timers = <&timer5>; >> + ti,watchdog-timers = <&timer6>; >> + clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; >> + resets = <&prm_tesla 0>, <&prm_tesla 1>; >> + firmware-name = "omap4-dsp-fw.xe64T"; >> + }; >> + }; >> + >> + - |+ >> + >> + //Example 2: OMAP5 IPU >> + >> + /* IPU Reserved Memory node */ >> + #include <dt-bindings/clock/omap5.h> >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + ipu_memory_region: ipu-memory@95800000 { >> + compatible = "shared-dma-pool"; >> + reg = <0 0x95800000 0 0x3800000>; >> + reusable; >> + }; >> + }; >> + >> + /* IPU node */ >> + ocp { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + ipu: ipu@55020000 { >> + compatible = "ti,omap5-ipu"; >> + reg = <0x55020000 0x10000>; >> + reg-names = "l2ram"; >> + iommus = <&mmu_ipu>; >> + mboxes = <&mailbox &mbox_ipu>; >> + memory-region = <&ipu_memory_region>; >> + ti,timers = <&timer3>, <&timer4>; >> + ti,watchdog-timers = <&timer9>, <&timer11>; >> + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; >> + resets = <&prm_core 2>; >> + firmware-name = "omap5-ipu-fw.xem"; >> + }; >> + }; >> + >> + - |+ >> + >> + //Example 3: DRA7xx/AM57xx DSP >> + >> + /* DSP1 Reserved Memory node */ >> + #include <dt-bindings/clock/dra7.h> >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + dsp1_memory_region: dsp1-memory@99000000 { >> + compatible = "shared-dma-pool"; >> + reg = <0x0 0x99000000 0x0 0x4000000>; >> + reusable; >> + }; >> + }; >> + >> + /* DSP1 node */ >> + ocp { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + dsp1: dsp@40800000 { >> + compatible = "ti,dra7-dsp"; >> + reg = <0x40800000 0x48000>, >> + <0x40e00000 0x8000>, >> + <0x40f00000 0x8000>; >> + reg-names = "l2ram", "l1pram", "l1dram"; >> + ti,bootreg = <&scm_conf 0x55c>; >> + iommus = <&mmu0_dsp1>, <&mmu1_dsp1>; >> + mboxes = <&mailbox5 &mbox_dsp1_ipc3x>; >> + memory-region = <&dsp1_memory_region>; >> + ti,timers = <&timer5>; >> + ti,watchdog-timers = <&timer10>; >> + resets = <&prm_dsp1 0>; >> + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; >> + firmware-name = "dra7-dsp1-fw.xe66"; >> + }; >> + }; >> -- >> 2.17.1 >> >> -- -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESEND PATCHv4 01/14] dt-bindings: remoteproc: Add OMAP remoteproc bindings 2020-01-07 11:01 ` Tero Kristo @ 2020-01-07 15:48 ` Rob Herring 0 siblings, 0 replies; 7+ messages in thread From: Rob Herring @ 2020-01-07 15:48 UTC (permalink / raw) To: Tero Kristo Cc: Bjorn Andersson, Ohad Ben-Cohen, open list:REMOTE PROCESSOR (REMOTEPROC) SUBSYSTEM, linux-kernel@vger.kernel.org, Mathieu Poirier, linux-omap, Suman Anna, devicetree On Tue, Jan 7, 2020 at 5:01 AM Tero Kristo <t-kristo@ti.com> wrote: > > On 04/01/2020 01:38, Rob Herring wrote: > > On Thu, Jan 02, 2020 at 03:25:12PM +0200, Tero Kristo wrote: > >> From: Suman Anna <s-anna@ti.com> > >> > >> Add the device tree bindings document for the IPU and DSP > >> remote processor devices on OMAP4+ SoCs. > >> > >> Cc: Rob Herring <robh@kernel.org> > >> Cc: devicetree@vger.kernel.org > >> Signed-off-by: Suman Anna <s-anna@ti.com> > >> [t-kristo@ti.com: converted to schema] > >> Signed-off-by: Tero Kristo <t-kristo@ti.com> > >> --- > >> v4: added ti,bootreg-shift and ti,autosuspend-delay properties > >> > >> .../remoteproc/ti,omap-remoteproc.yaml | 329 ++++++++++++++++++ > >> 1 file changed, 329 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml > >> + reg: > >> + description: | > >> + Address space for any remoteproc memories present on > >> + the SoC. Should contain an entry for each value in > >> + 'reg-names'. These are mandatory for all DSP and IPU > >> + processors that have them (OMAP4/OMAP5 DSPs do not have > >> + any RAMs) > >> + > >> + reg-names: > >> + description: | > >> + Required names for each of the address spaces defined in > >> + the 'reg' property. Should contain a string from among > >> + the following names, each representing the corresponding > >> + internal RAM memory region. > > > > The schema is more constrained than 'a string from among the following > > names'. 'l2ram' is the only valid 1st entry for example. > > Right, I wasn't able to figure out a way to make the schema more > flexible, so I will just modify the description above. The goal is somewhat to not be flexible as we want the possible combinations defined. If it is a manageable number of combinations, just list them out under a 'oneOf'. Not encouraged, but it is possible to define any length and order of values (note 'items' is not a list here): items: enum: [ ... ] Rob ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESEND PATCHv4 01/14] dt-bindings: remoteproc: Add OMAP remoteproc bindings 2020-01-02 13:25 ` [RESEND PATCHv4 01/14] dt-bindings: remoteproc: Add OMAP remoteproc bindings Tero Kristo 2020-01-03 23:38 ` Rob Herring @ 2020-01-08 16:49 ` Suman Anna 2020-01-16 7:51 ` Tero Kristo 1 sibling, 1 reply; 7+ messages in thread From: Suman Anna @ 2020-01-08 16:49 UTC (permalink / raw) To: Tero Kristo, bjorn.andersson, ohad, linux-remoteproc Cc: linux-kernel, mathieu.poirier, linux-omap, Rob Herring, devicetree Hi Tero, On 1/2/20 7:25 AM, Tero Kristo wrote: > From: Suman Anna <s-anna@ti.com> > > Add the device tree bindings document for the IPU and DSP > remote processor devices on OMAP4+ SoCs. > > Cc: Rob Herring <robh@kernel.org> > Cc: devicetree@vger.kernel.org > Signed-off-by: Suman Anna <s-anna@ti.com> > [t-kristo@ti.com: converted to schema] > Signed-off-by: Tero Kristo <t-kristo@ti.com> > --- > v4: added ti,bootreg-shift and ti,autosuspend-delay properties You missed out on my v3 comment on the firmware-name on Example 2. Can you please address it when you post the next version? > > .../remoteproc/ti,omap-remoteproc.yaml | 329 ++++++++++++++++++ > 1 file changed, 329 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml > > diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml > new file mode 100644 > index 000000000000..f53d58efaae3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml [snip] > + - |+ > + > + //Example 2: OMAP5 IPU > + > + /* IPU Reserved Memory node */ > + #include <dt-bindings/clock/omap5.h> > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + > + ipu_memory_region: ipu-memory@95800000 { > + compatible = "shared-dma-pool"; > + reg = <0 0x95800000 0 0x3800000>; > + reusable; > + }; > + }; > + > + /* IPU node */ > + ocp { > + #address-cells = <1>; > + #size-cells = <1>; > + > + ipu: ipu@55020000 { > + compatible = "ti,omap5-ipu"; > + reg = <0x55020000 0x10000>; > + reg-names = "l2ram"; > + iommus = <&mmu_ipu>; > + mboxes = <&mailbox &mbox_ipu>; > + memory-region = <&ipu_memory_region>; > + ti,timers = <&timer3>, <&timer4>; > + ti,watchdog-timers = <&timer9>, <&timer11>; > + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; > + resets = <&prm_core 2>; > + firmware-name = "omap5-ipu-fw.xem"; > + }; > + }; regards Suman ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESEND PATCHv4 01/14] dt-bindings: remoteproc: Add OMAP remoteproc bindings 2020-01-08 16:49 ` Suman Anna @ 2020-01-16 7:51 ` Tero Kristo 2020-01-16 14:00 ` Tero Kristo 0 siblings, 1 reply; 7+ messages in thread From: Tero Kristo @ 2020-01-16 7:51 UTC (permalink / raw) To: Suman Anna, bjorn.andersson, ohad, linux-remoteproc Cc: linux-kernel, mathieu.poirier, linux-omap, Rob Herring, devicetree On 08/01/2020 18:49, Suman Anna wrote: > Hi Tero, > > On 1/2/20 7:25 AM, Tero Kristo wrote: >> From: Suman Anna <s-anna@ti.com> >> >> Add the device tree bindings document for the IPU and DSP >> remote processor devices on OMAP4+ SoCs. >> >> Cc: Rob Herring <robh@kernel.org> >> Cc: devicetree@vger.kernel.org >> Signed-off-by: Suman Anna <s-anna@ti.com> >> [t-kristo@ti.com: converted to schema] >> Signed-off-by: Tero Kristo <t-kristo@ti.com> >> --- >> v4: added ti,bootreg-shift and ti,autosuspend-delay properties > > You missed out on my v3 comment on the firmware-name on Example 2. Can > you please address it when you post the next version? I don't think I missed it, but you never told what is the actual name to use there. Firmware name generally does not matter, as user can provide whatever he wants via DT now. -Tero > >> >> .../remoteproc/ti,omap-remoteproc.yaml | 329 ++++++++++++++++++ >> 1 file changed, 329 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml >> >> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml >> new file mode 100644 >> index 000000000000..f53d58efaae3 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml > > [snip] > >> + - |+ >> + >> + //Example 2: OMAP5 IPU >> + >> + /* IPU Reserved Memory node */ >> + #include <dt-bindings/clock/omap5.h> >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + ipu_memory_region: ipu-memory@95800000 { >> + compatible = "shared-dma-pool"; >> + reg = <0 0x95800000 0 0x3800000>; >> + reusable; >> + }; >> + }; >> + >> + /* IPU node */ >> + ocp { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + ipu: ipu@55020000 { >> + compatible = "ti,omap5-ipu"; >> + reg = <0x55020000 0x10000>; >> + reg-names = "l2ram"; >> + iommus = <&mmu_ipu>; >> + mboxes = <&mailbox &mbox_ipu>; >> + memory-region = <&ipu_memory_region>; >> + ti,timers = <&timer3>, <&timer4>; >> + ti,watchdog-timers = <&timer9>, <&timer11>; >> + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; >> + resets = <&prm_core 2>; >> + firmware-name = "omap5-ipu-fw.xem"; >> + }; >> + }; > > regards > Suman > -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESEND PATCHv4 01/14] dt-bindings: remoteproc: Add OMAP remoteproc bindings 2020-01-16 7:51 ` Tero Kristo @ 2020-01-16 14:00 ` Tero Kristo 0 siblings, 0 replies; 7+ messages in thread From: Tero Kristo @ 2020-01-16 14:00 UTC (permalink / raw) To: Suman Anna, bjorn.andersson, ohad, linux-remoteproc Cc: linux-kernel, mathieu.poirier, linux-omap, Rob Herring, devicetree On 16/01/2020 09:51, Tero Kristo wrote: > On 08/01/2020 18:49, Suman Anna wrote: >> Hi Tero, >> >> On 1/2/20 7:25 AM, Tero Kristo wrote: >>> From: Suman Anna <s-anna@ti.com> >>> >>> Add the device tree bindings document for the IPU and DSP >>> remote processor devices on OMAP4+ SoCs. >>> >>> Cc: Rob Herring <robh@kernel.org> >>> Cc: devicetree@vger.kernel.org >>> Signed-off-by: Suman Anna <s-anna@ti.com> >>> [t-kristo@ti.com: converted to schema] >>> Signed-off-by: Tero Kristo <t-kristo@ti.com> >>> --- >>> v4: added ti,bootreg-shift and ti,autosuspend-delay properties >> >> You missed out on my v3 comment on the firmware-name on Example 2. Can >> you please address it when you post the next version? > > I don't think I missed it, but you never told what is the actual name to > use there. Firmware name generally does not matter, as user can provide > whatever he wants via DT now. Just to close on this, so the issue was file extension for the firmware name being .xem when it should have been .xem4. Fixed in v5 now. -Tero > >> >>> >>> .../remoteproc/ti,omap-remoteproc.yaml | 329 ++++++++++++++++++ >>> 1 file changed, 329 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml >>> >>> diff --git >>> a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml >>> >>> new file mode 100644 >>> index 000000000000..f53d58efaae3 >>> --- /dev/null >>> +++ >>> b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml >> >> [snip] >> >>> + - |+ >>> + >>> + //Example 2: OMAP5 IPU >>> + >>> + /* IPU Reserved Memory node */ >>> + #include <dt-bindings/clock/omap5.h> >>> + reserved-memory { >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + >>> + ipu_memory_region: ipu-memory@95800000 { >>> + compatible = "shared-dma-pool"; >>> + reg = <0 0x95800000 0 0x3800000>; >>> + reusable; >>> + }; >>> + }; >>> + >>> + /* IPU node */ >>> + ocp { >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + >>> + ipu: ipu@55020000 { >>> + compatible = "ti,omap5-ipu"; >>> + reg = <0x55020000 0x10000>; >>> + reg-names = "l2ram"; >>> + iommus = <&mmu_ipu>; >>> + mboxes = <&mailbox &mbox_ipu>; >>> + memory-region = <&ipu_memory_region>; >>> + ti,timers = <&timer3>, <&timer4>; >>> + ti,watchdog-timers = <&timer9>, <&timer11>; >>> + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; >>> + resets = <&prm_core 2>; >>> + firmware-name = "omap5-ipu-fw.xem"; >>> + }; >>> + }; >> >> regards >> Suman >> > -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-01-16 14:00 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20200102131845.12992-2-t-kristo@ti.com>
2020-01-02 13:25 ` [RESEND PATCHv4 01/14] dt-bindings: remoteproc: Add OMAP remoteproc bindings Tero Kristo
2020-01-03 23:38 ` Rob Herring
2020-01-07 11:01 ` Tero Kristo
2020-01-07 15:48 ` Rob Herring
2020-01-08 16:49 ` Suman Anna
2020-01-16 7:51 ` Tero Kristo
2020-01-16 14:00 ` Tero Kristo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).