From: Benjamin Gaignard <benjamin.gaignard@st.com>
To: <dmitry.torokhov@gmail.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <hadess@hadess.net>
Cc: <linux-input@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <yannick.fertre@st.com>,
Benjamin Gaignard <benjamin.gaignard@st.com>
Subject: [PATCH v2 1/2] dt-bindings: touchscreen: Add touchscreen schema
Date: Wed, 8 Jan 2020 10:11:17 +0100 [thread overview]
Message-ID: <20200108091118.5130-2-benjamin.gaignard@st.com> (raw)
In-Reply-To: <20200108091118.5130-1-benjamin.gaignard@st.com>
Add touchscreen schema for common properties
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
version 2:
- remove old definition in touchscreen.txt
- add type for all properties
- add dependencies between properties
.../bindings/input/touchscreen/touchscreen.txt | 40 +----------
.../bindings/input/touchscreen/touchscreen.yaml | 83 ++++++++++++++++++++++
2 files changed, 84 insertions(+), 39 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
index 8641a2d70851..e1adb902d503 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@@ -1,39 +1 @@
-General Touchscreen Properties:
-
-Optional properties for Touchscreens:
- - touchscreen-min-x : minimum x coordinate reported (0 if not set)
- - touchscreen-min-y : minimum y coordinate reported (0 if not set)
- - touchscreen-size-x : horizontal resolution of touchscreen
- (maximum x coordinate reported + 1)
- - touchscreen-size-y : vertical resolution of touchscreen
- (maximum y coordinate reported + 1)
- - touchscreen-max-pressure : maximum reported pressure (arbitrary range
- dependent on the controller)
- - touchscreen-min-pressure : minimum pressure on the touchscreen to be
- achieved in order for the touchscreen
- driver to report a touch event.
- - touchscreen-fuzz-x : horizontal noise value of the absolute input
- device (in pixels)
- - touchscreen-fuzz-y : vertical noise value of the absolute input
- device (in pixels)
- - touchscreen-fuzz-pressure : pressure noise value of the absolute input
- device (arbitrary range dependent on the
- controller)
- - touchscreen-average-samples : Number of data samples which are averaged
- for each read (valid values dependent on the
- controller)
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
- Swapping is done after inverting the axis
- - touchscreen-x-mm : horizontal length in mm of the touchscreen
- - touchscreen-y-mm : vertical length in mm of the touchscreen
-
-Deprecated properties for Touchscreens:
- - x-size : deprecated name for touchscreen-size-x
- - y-size : deprecated name for touchscreen-size-y
- - moving-threshold : deprecated name for a combination of
- touchscreen-fuzz-x and touchscreen-fuzz-y
- - contact-threshold : deprecated name for touchscreen-fuzz-pressure
- - x-invert : deprecated name for touchscreen-inverted-x
- - y-invert : deprecated name for touchscreen-inverted-y
+See touchscreen.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
new file mode 100644
index 000000000000..d7dac16a3960
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common touchscreen Bindings
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+properties:
+ touchscreen-min-x:
+ description: minimum x coordinate reported
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ touchscreen-min-y:
+ description: minimum y coordinate reported
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ touchscreen-size-x:
+ description: horizontal resolution of touchscreen (maximum x coordinate reported + 1)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-size-y:
+ description: vertical resolution of touchscreen (maximum y coordinate reported + 1)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-max-pressure:
+ description: maximum reported pressure (arbitrary range dependent on the controller)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-min-pressure:
+ description: minimum pressure on the touchscreen to be achieved in order for the
+ touchscreen driver to report a touch event.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-fuzz-x:
+ description: horizontal noise value of the absolute input device (in pixels)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-fuzz-y:
+ description: vertical noise value of the absolute input device (in pixels)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-fuzz-pressure:
+ description: pressure noise value of the absolute input device (arbitrary range
+ dependent on the controller)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-average-samples:
+ description: Number of data samples which are averaged for each read (valid values
+ dependent on the controller)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-inverted-x:
+ description: X axis is inverted
+ type: boolean
+
+ touchscreen-inverted-y:
+ description: Y axis is inverted
+ type: boolean
+
+ touchscreen-swapped-x-y:
+ description: X and Y axis are swapped
+ Swapping is done after inverting the axis
+ type: boolean
+
+ touchscreen-x-mm:
+ description: horizontal length in mm of the touchscreen
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-y-mm:
+ description: vertical length in mm of the touchscreen
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+dependencies:
+ touchscreen-size-x: [ touchscreen-size-y ]
+ touchscreen-size-y: [ touchscreen-size-x ]
+ touchscreen-x-mm: [ touchscreen-y-mm ]
+ touchscreen-y-mm: [ touchscreen-x-mm ]
--
2.15.0
next prev parent reply other threads:[~2020-01-08 9:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-08 9:11 [PATCH v2 0/2] Convert touchscreen bindings to json-schema Benjamin Gaignard
2020-01-08 9:11 ` Benjamin Gaignard [this message]
2020-01-14 23:30 ` [PATCH v2 1/2] dt-bindings: touchscreen: Add touchscreen schema Rob Herring
2020-01-27 22:07 ` Dmitry Torokhov
2020-01-08 9:11 ` [PATCH v2 2/2] dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema Benjamin Gaignard
2020-01-14 23:31 ` Rob Herring
2020-01-27 22:07 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200108091118.5130-2-benjamin.gaignard@st.com \
--to=benjamin.gaignard@st.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=hadess@hadess.net \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=yannick.fertre@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).