From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>,
Jeffrey Hugo <jeffrey.l.hugo@gmail.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Sasha Levin <sashal@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 090/205] arm64: dts: qcom: msm8998: Disable coresight by default
Date: Thu, 16 Jan 2020 11:41:05 -0500 [thread overview]
Message-ID: <20200116164300.6705-90-sashal@kernel.org> (raw)
In-Reply-To: <20200116164300.6705-1-sashal@kernel.org>
From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
[ Upstream commit a636f93fcdb4a516e7cba6a365645ee8429602b2 ]
Boot failure has been reported on MSM8998 based laptop when
coresight is enabled. This is most likely due to lack of
firmware support for coresight on production device when
compared to debug device like MTP where this issue is not
observed. So disable coresight by default for MSM8998 and
enable it only for MSM8998 MTP.
Reported-and-tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Fixes: 783abfa2249a ("arm64: dts: qcom: msm8998: Add Coresight support")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 68 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/msm8998.dtsi | 51 +++++++++++------
2 files changed, 102 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 108667ce4f31..8d15572d18e6 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -27,6 +27,66 @@
status = "okay";
};
+&etf {
+ status = "okay";
+};
+
+&etm1 {
+ status = "okay";
+};
+
+&etm2 {
+ status = "okay";
+};
+
+&etm3 {
+ status = "okay";
+};
+
+&etm4 {
+ status = "okay";
+};
+
+&etm5 {
+ status = "okay";
+};
+
+&etm6 {
+ status = "okay";
+};
+
+&etm7 {
+ status = "okay";
+};
+
+&etm8 {
+ status = "okay";
+};
+
+&etr {
+ status = "okay";
+};
+
+&funnel1 {
+ status = "okay";
+};
+
+&funnel2 {
+ status = "okay";
+};
+
+&funnel3 {
+ status = "okay";
+};
+
+&funnel4 {
+ status = "okay";
+};
+
+&funnel5 {
+ status = "okay";
+};
+
&pm8005_lsid1 {
pm8005-regulators {
compatible = "qcom,pm8005-regulators";
@@ -51,6 +111,10 @@
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
+&replicator1 {
+ status = "okay";
+};
+
&rpm_requests {
pm8998-regulators {
compatible = "qcom,rpm-pm8998-regulators";
@@ -249,6 +313,10 @@
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
};
+&stm {
+ status = "okay";
+};
+
&ufshc {
vcc-supply = <&vreg_l20a_2p95>;
vccq-supply = <&vreg_l26a_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c6f81431983e..ffb64fc239ee 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -998,11 +998,12 @@
#interrupt-cells = <0x2>;
};
- stm@6002000 {
+ stm: stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0x06002000 0x1000>,
<0x16280000 0x180000>;
reg-names = "stm-base", "stm-data-base";
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1016,9 +1017,10 @@
};
};
- funnel@6041000 {
+ funnel1: funnel@6041000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x06041000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1045,9 +1047,10 @@
};
};
- funnel@6042000 {
+ funnel2: funnel@6042000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x06042000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1075,9 +1078,10 @@
};
};
- funnel@6045000 {
+ funnel3: funnel@6045000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x06045000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1113,9 +1117,10 @@
};
};
- replicator@6046000 {
+ replicator1: replicator@6046000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0x06046000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1137,9 +1142,10 @@
};
};
- etf@6047000 {
+ etf: etf@6047000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x06047000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1163,9 +1169,10 @@
};
};
- etr@6048000 {
+ etr: etr@6048000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x06048000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1181,9 +1188,10 @@
};
};
- etm@7840000 {
+ etm1: etm@7840000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07840000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1200,9 +1208,10 @@
};
};
- etm@7940000 {
+ etm2: etm@7940000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07940000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1219,9 +1228,10 @@
};
};
- etm@7a40000 {
+ etm3: etm@7a40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07a40000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1238,9 +1248,10 @@
};
};
- etm@7b40000 {
+ etm4: etm@7b40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07b40000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1257,9 +1268,10 @@
};
};
- funnel@7b60000 { /* APSS Funnel */
+ funnel4: funnel@7b60000 { /* APSS Funnel */
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07b60000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1343,9 +1355,10 @@
};
};
- funnel@7b70000 {
+ funnel5: funnel@7b70000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x07b70000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1369,9 +1382,10 @@
};
};
- etm@7c40000 {
+ etm5: etm@7c40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07c40000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1385,9 +1399,10 @@
};
};
- etm@7d40000 {
+ etm6: etm@7d40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07d40000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1401,9 +1416,10 @@
};
};
- etm@7e40000 {
+ etm7: etm@7e40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07e40000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1417,9 +1433,10 @@
};
};
- etm@7f40000 {
+ etm8: etm@7f40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07f40000 0x1000>;
+ status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
--
2.20.1
next prev parent reply other threads:[~2020-01-16 16:51 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200116164300.6705-1-sashal@kernel.org>
2020-01-16 16:39 ` [PATCH AUTOSEL 5.4 007/205] arm64: dts: renesas: r8a77970: Fix PWM3 Sasha Levin
2020-01-16 16:39 ` [PATCH AUTOSEL 5.4 020/205] arm64: dts: meson: axg: fix audio fifo reg size Sasha Levin
2020-01-16 16:39 ` [PATCH AUTOSEL 5.4 021/205] arm64: dts: meson: g12: " Sasha Levin
2020-01-16 16:40 ` [PATCH AUTOSEL 5.4 025/205] hwrng: omap3-rom - Fix missing clock by probing with device tree Sasha Levin
2020-01-16 16:40 ` [PATCH AUTOSEL 5.4 031/205] arm64: dts: meson-gxl-s905x-khadas-vim: fix gpio-keys-polled node Sasha Levin
2020-01-16 16:40 ` [PATCH AUTOSEL 5.4 033/205] arm64: dts: marvell: Add AP806-dual missing CPU clocks Sasha Levin
2020-01-16 16:40 ` [PATCH AUTOSEL 5.4 038/205] arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD Sasha Levin
2020-01-16 16:40 ` [PATCH AUTOSEL 5.4 069/205] arm64: dts: qcom: sdm845-cheza: delete zap-shader Sasha Levin
2020-01-16 16:40 ` [PATCH AUTOSEL 5.4 073/205] arm64: dts: imx8mm-evk: Assigned clocks for audio plls Sasha Levin
2020-01-16 16:41 ` Sasha Levin [this message]
2020-01-16 16:41 ` [PATCH AUTOSEL 5.4 097/205] ARM: dts: imx6ul-kontron-n6310-s: Disable the snvs-poweroff driver Sasha Levin
2020-01-16 16:41 ` [PATCH AUTOSEL 5.4 103/205] arm64: dts: allwinner: a64: Re-add PMU node Sasha Levin
2020-01-16 16:42 ` [PATCH AUTOSEL 5.4 160/205] ARM: dts: dra7: fix cpsw mdio fck clock Sasha Levin
2020-01-16 16:42 ` [PATCH AUTOSEL 5.4 173/205] ARM: dts: Fix sgx sysconfig register for omap4 Sasha Levin
2020-01-16 16:42 ` [PATCH AUTOSEL 5.4 174/205] arm64: dts: juno: Fix UART frequency Sasha Levin
2020-01-16 16:42 ` [PATCH AUTOSEL 5.4 182/205] Revert "arm64: dts: juno: add dma-ranges property" Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200116164300.6705-90-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jeffrey.l.hugo@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).