From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Vladimir Oltean <olteanv@gmail.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Li Yang <leoyang.li@nxp.com>, Shawn Guo <shawnguo@kernel.org>,
Sasha Levin <sashal@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 305/671] ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect
Date: Thu, 16 Jan 2020 11:59:03 -0500 [thread overview]
Message-ID: <20200116170509.12787-42-sashal@kernel.org> (raw)
In-Reply-To: <20200116170509.12787-1-sashal@kernel.org>
From: Vladimir Oltean <olteanv@gmail.com>
[ Upstream commit c7861adbe37f576931650ad8ef805e0c47564b9a ]
Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus.
But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC
are pointing towards the same internal PCS. Therefore nobody is
controlling the internal PCS of eTSEC0.
Upon initial ndo_open, the SGMII link is ok by virtue of U-boot
initialization. But upon an ifdown/ifup sequence, the code path from
ndo_open -> init_phy -> gfar_configure_serdes does not get executed for
the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII
link remains down for eTSEC0. On the LS1021A-TWR board, to signal this
failure condition, the PHY driver keeps printing
'803x_aneg_done: SGMII link is not ok'.
Also, it changes compatible of mdio0 to "fsl,etsec2-mdio" to match
mdio1 device.
Fixes: 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/ls1021a-twr.dts | 9 ++++++++-
arch/arm/boot/dts/ls1021a.dtsi | 11 ++++++++++-
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index f0c949d74833..ec5afad3efd8 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -143,7 +143,7 @@
};
&enet0 {
- tbi-handle = <&tbi1>;
+ tbi-handle = <&tbi0>;
phy-handle = <&sgmii_phy2>;
phy-connection-type = "sgmii";
status = "okay";
@@ -222,6 +222,13 @@
sgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
+ tbi0: tbi-phy@1f {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+};
+
+&mdio1 {
tbi1: tbi-phy@1f {
reg = <0x1f>;
device_type = "tbi-phy";
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index f18490548c78..7e22309bccac 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -584,7 +584,7 @@
};
mdio0: mdio@2d24000 {
- compatible = "gianfar";
+ compatible = "fsl,etsec2-mdio";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
@@ -592,6 +592,15 @@
<0x0 0x2d10030 0x0 0x4>;
};
+ mdio1: mdio@2d64000 {
+ compatible = "fsl,etsec2-mdio";
+ device_type = "mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2d64000 0x0 0x4000>,
+ <0x0 0x2d50030 0x0 0x4>;
+ };
+
ptp_clock@2d10e00 {
compatible = "fsl,etsec-ptp";
reg = <0x0 0x2d10e00 0x0 0xb0>;
--
2.20.1
next prev parent reply other threads:[~2020-01-16 19:00 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200116170509.12787-1-sashal@kernel.org>
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 283/671] of: use correct function prototype for of_overlay_fdt_apply() Sasha Levin
2020-01-16 16:59 ` Sasha Levin [this message]
2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 322/671] ARM: dts: logicpd-som-lv: Fix MMC1 card detect Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 364/671] ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 368/671] arm64: dts: meson: libretech-cc: set eMMC as removable Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 400/671] arm64: dts: renesas: ebisu: Remove renesas, no-ether-link property Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 403/671] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 404/671] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 427/671] ARM: dts: iwg20d-q7-common: Fix SDHI1 VccQ regularor Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 429/671] arm64: dts: allwinner: h6: Pine H64: Add interrupt line for RTC Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 476/671] arm64: dts: renesas: r8a77995: Fix register range of display node Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 478/671] ARM: dts: stm32: add missing vdda-supply to adc on stm32h743i-eval Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 528/671] ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 535/671] ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 569/671] of: mdio: Fix a signedness bug in of_phy_get_and_connect() Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 617/671] hwrng: omap3-rom - Fix missing clock by probing with device tree Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 619/671] arm64: dts: meson-gxl-s905x-khadas-vim: fix gpio-keys-polled node Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 621/671] arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 660/671] arm64: dts: juno: Fix UART frequency Sasha Levin
2020-01-16 17:05 ` [PATCH AUTOSEL 4.19 663/671] Revert "arm64: dts: juno: add dma-ranges property" Sasha Levin
2020-01-16 17:05 ` [PATCH AUTOSEL 4.19 671/671] arm64: dts: meson-gxm-khadas-vim2: fix uart_A bluetooth node Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200116170509.12787-42-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=claudiu.manoil@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).