[PATCH v4 2/2] ata: ahci_brcm: BCM7216 reset is self de-asserting

[Florian Fainelli <f.fainelli@gmail.com>]

The BCM7216 reset controller line is self-deasserting, unlike other
platforms, so make use of reset_control_reset() instead of
reset_control_deassert().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/ata/ahci_brcm.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index e32c8fe729ff..6853dbb4131d 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -352,7 +352,8 @@ static int brcm_ahci_suspend(struct device *dev)
 	else
 		ret = 0;
 
-	reset_control_assert(priv->rcdev);
+	if (priv->version != BRCM_SATA_BCM7216)
+		reset_control_assert(priv->rcdev);
 
 	return ret;
 }
@@ -364,7 +365,10 @@ static int __maybe_unused brcm_ahci_resume(struct device *dev)
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
 	int ret = 0;
 
-	ret = reset_control_deassert(priv->rcdev);
+	if (priv->version == BRCM_SATA_BCM7216)
+		ret = reset_control_reset(priv->rcdev);
+	else
+		ret = reset_control_deassert(priv->rcdev);
 	if (ret)
 		return ret;
 
@@ -475,7 +479,10 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 		break;
 	}
 
-	ret = reset_control_deassert(priv->rcdev);
+	if (priv->version == BRCM_SATA_BCM7216)
+		ret = reset_control_reset(priv->rcdev);
+	else
+		ret = reset_control_deassert(priv->rcdev);
 	if (ret)
 		return ret;
 
@@ -520,7 +527,8 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 out_disable_clks:
 	ahci_platform_disable_clks(hpriv);
 out_reset:
-	reset_control_assert(priv->rcdev);
+	if (priv->version != BRCM_SATA_BCM7216)
+		reset_control_assert(priv->rcdev);
 	return ret;
 }
 
-- 
2.17.1