[PATCH v4 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding

[PATCH v4 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding

[Bryan O'Donoghue]

From: Sriharsha Allenki <sallenki@codeaurora.org>

Adds bindings for Qualcomm's 28 nm USB PHY supporting Low-Speed, Full-Speed
and Hi-Speed USB connectivity on Qualcomm chipsets.

[bod: Converted to YAML. Changed name dropping snps, 28nm components]

Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../bindings/phy/qcom,usb-hs-28nm.yaml        | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
new file mode 100644
index 000000000000..ca6a0836b53c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Qualcomm Low-Speed, Full-Speed, Hi-Speed 28nm USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-hs-28nm-femtophy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmcc ref clock
+      - description: PHY AHB clock
+      - description: Rentention clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ahb
+      - const: sleep
+
+  resets:
+    items:
+      - description: PHY core reset
+      - description: POR reset
+
+  reset-names:
+    items:
+      - const: phy
+      - const: por
+
+  vdd-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda1p8-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  vdda3p3-supply:
+    description: phandle to the regulator 3.3V supply node.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdd-supply
+  - vdda1p8-supply
+  - vdda3p3-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    usb2_phy_prim: phy@7a000 {
+        compatible = "qcom,usb-hs-28nm-femtophy";
+        reg = <0x0007a000 0x200>;
+        #phy-cells = <0>;
+        clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+                 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+        clock-names = "ref", "ahb", "sleep";
+        resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+                 <&gcc GCC_USB2A_PHY_BCR>;
+        reset-names = "phy", "por";
+        vdd-supply = <&vreg_l4_1p2>;
+        vdda1p8-supply = <&vreg_l5_1p8>;
+        vdda3p3-supply = <&vreg_l12_3p3>;
+    };
+...
-- 
2.25.0

[PATCH v4 04/18] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings

[Bryan O'Donoghue]

From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>

Binding description for Qualcomm's Synopsys 1.0.0 SuperSpeed PHY. This PHY
appears in a number of SoCs on various flavors of 20nm and 28nm nodes.

Based on Sriharsha Allenki's <sallenki@codeaurora.org> original
definitions.

[bod: converted to yaml format]

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../devicetree/bindings/phy/qcom,usb-ss.yaml  | 83 +++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml
new file mode 100644
index 000000000000..377b9e1e39d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-ss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-ssphy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmcc clock
+      - description: PHY AHB clock
+      - description: SuperSpeed pipe clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ahb
+      - const: pipe
+
+  vdd-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda1p8-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  resets:
+    items:
+      - description: COM reset
+      - description: PHY reset line
+
+  reset-names:
+    items:
+      - const: com
+      - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - vdd-supply
+  - vdda1p8-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    usb3_phy: usb3-phy@78000 {
+        compatible = "qcom,usb-ssphy";
+        reg = <0x78000 0x400>;
+        #phy-cells = <0>;
+        clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+                 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+        clock-names = "ref", "ahb", "pipe";
+        resets = <&gcc GCC_USB3_PHY_BCR>,
+                 <&gcc GCC_USB3PHY_PHY_BCR>;
+        reset-names = "com", "phy";
+        vdd-supply = <&vreg_l3_1p05>;
+        vdda1p8-supply = <&vreg_l5_1p8>;
+    };
+...
-- 
2.25.0

[PATCH v4 06/18] usb: dwc3: Registering a role switch in the DRD code.

[Bryan O'Donoghue]

From: Yu Chen <chenyu56@huawei.com>

The Type-C drivers use USB role switch API to inform the
system about the negotiated data role, so registering a role
switch in the DRD code in order to support platforms with
USB Type-C connectors.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/usb/dwc3/core.h |  3 ++
 drivers/usb/dwc3/drd.c  | 75 ++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 77 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 77c4a9abe365..a99e57636172 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -25,6 +25,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/role.h>
 #include <linux/ulpi/interface.h>
 
 #include <linux/phy/phy.h>
@@ -953,6 +954,7 @@ struct dwc3_scratchpad_array {
  * @hsphy_mode: UTMI phy mode, one of following:
  *		- USBPHY_INTERFACE_MODE_UTMI
  *		- USBPHY_INTERFACE_MODE_UTMIW
+ * @role_sw: usb_role_switch handle
  * @usb2_phy: pointer to USB2 PHY
  * @usb3_phy: pointer to USB3 PHY
  * @usb2_generic_phy: pointer to USB2 PHY
@@ -1086,6 +1088,7 @@ struct dwc3 {
 	struct extcon_dev	*edev;
 	struct notifier_block	edev_nb;
 	enum usb_phy_interface	hsphy_mode;
+	struct usb_role_switch	*role_sw;
 
 	u32			fladj;
 	u32			irq_gadget;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index c946d64142ad..c355166793d0 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -476,6 +476,71 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	return edev;
 }
 
+#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
+static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	u32 mode;
+
+	switch (role) {
+	case USB_ROLE_HOST:
+		mode = DWC3_GCTL_PRTCAP_HOST;
+		break;
+	case USB_ROLE_DEVICE:
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	default:
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	}
+
+	dwc3_set_mode(dwc, mode);
+	return 0;
+}
+
+static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	unsigned long flags;
+	enum usb_role role;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		role = USB_ROLE_HOST;
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		role = USB_ROLE_DEVICE;
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		role = dwc->current_otg_role;
+		break;
+	default:
+		role = USB_ROLE_DEVICE;
+		break;
+	}
+	spin_unlock_irqrestore(&dwc->lock, flags);
+	return role;
+}
+
+static int dwc3_setup_role_switch(struct dwc3 *dwc)
+{
+	struct usb_role_switch_desc dwc3_role_switch = {NULL};
+
+	dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+	dwc3_role_switch.set = dwc3_usb_role_switch_set;
+	dwc3_role_switch.get = dwc3_usb_role_switch_get;
+	dwc->role_sw = usb_role_switch_register(dwc->dev, &dwc3_role_switch);
+	if (IS_ERR(dwc->role_sw))
+		return PTR_ERR(dwc->role_sw);
+
+	dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+	return 0;
+}
+#else
+#define dwc3_setup_role_switch(x) 0
+#endif
+
 int dwc3_drd_init(struct dwc3 *dwc)
 {
 	int ret, irq;
@@ -484,7 +549,12 @@ int dwc3_drd_init(struct dwc3 *dwc)
 	if (IS_ERR(dwc->edev))
 		return PTR_ERR(dwc->edev);
 
-	if (dwc->edev) {
+	if (IS_ENABLED(CONFIG_USB_ROLE_SWITCH) &&
+	    device_property_read_bool(dwc->dev, "usb-role-switch")) {
+		ret = dwc3_setup_role_switch(dwc);
+		if (ret < 0)
+			return ret;
+	} else if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
 					       &dwc->edev_nb);
@@ -531,6 +601,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
 {
 	unsigned long flags;
 
+	if (dwc->role_sw)
+		usb_role_switch_unregister(dwc->role_sw);
+
 	if (dwc->edev)
 		extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
 					   &dwc->edev_nb);
-- 
2.25.0

[PATCH v4 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example

[Bryan O'Donoghue]

A USB connector should be a child node of the USB controller
connector/usb-connector.txt. This patch adds an example of how to do this
to the dwc3 binding descriptions.

It is necessary to declare a connector as a child-node of a USB controller
for role-switching to work, so this example should be helpful to others
implementing that.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 Documentation/devicetree/bindings/usb/dwc3.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 66780a47ad85..4e1e4afccee6 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -121,4 +121,12 @@ dwc3@4a030000 {
 	interrupts = <0 92 4>
 	usb-phy = <&usb2_phy>, <&usb3,phy>;
 	snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+
+	usb_con: connector {
+		compatible = "gpio-usb-b-connector";
+		id-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb3_vbus_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_id_pin>, <&usb3_vbus_pin>;
+	};
 };
-- 
2.25.0

[PATCH v4 10/18] usb: dwc3: Add support for usb-conn-gpio connectors

[Bryan O'Donoghue]

This patch adds the ability to probe and enumerate a connector based on
usb-conn-gpio. A device node label gpio_usb_connector is used to identify
a usb-conn-gpio as a child of the USB interface.

You would use usb-conn-gpio when a regulator in your system provides VBUS
directly to the connector instead of supplying via the USB PHY.

The parent device must have the "usb-role-switch" property, so that when
the usb-conn-gpio driver calls usb_role_switch_set_role() the notification
in dwc3 will run and the block registers will be updated to match the state
detected at the connector.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/usb/dwc3/drd.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index c355166793d0..c1825fd655f6 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -11,6 +11,7 @@
 #include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
+#include <linux/of_platform.h>
 
 #include "debug.h"
 #include "core.h"
@@ -537,8 +538,29 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc)
 	dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 	return 0;
 }
+
+static int dwc3_register_gpio_usb_connector(struct dwc3 *dwc)
+{
+	struct device		*dev = dwc->dev;
+	struct device_node	*np = dev->of_node, *conn_np;
+	int			ret = 0;
+
+	conn_np = of_get_child_by_name(np, "connector");
+	if (!conn_np) {
+		dev_dbg(dev, "no connector child node specified\n");
+		goto done;
+	}
+
+	if (of_device_is_compatible(conn_np, "gpio-usb-b-connector"))
+		ret = of_platform_populate(np, NULL, NULL, dev);
+done:
+	of_node_put(conn_np);
+	return ret;
+}
+
 #else
 #define dwc3_setup_role_switch(x) 0
+#define dwc3_register_gpio_usb_connector(x) 0
 #endif
 
 int dwc3_drd_init(struct dwc3 *dwc)
@@ -554,6 +576,9 @@ int dwc3_drd_init(struct dwc3 *dwc)
 		ret = dwc3_setup_role_switch(dwc);
 		if (ret < 0)
 			return ret;
+		ret = dwc3_register_gpio_usb_connector(dwc);
+		if (ret < 0)
+			return ret;
 	} else if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
-- 
2.25.0

[PATCH v4 11/18] arm64: dts: qcom: qcs404: Add USB devices and PHYs

[Bryan O'Donoghue]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

QCS404 sports HS and SS USB controllers based on dwc3 block with two HS
PHYs and one SS PHY. Add nodes for these devices and enable them for
EVB board.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 100 +++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index f5f0c4c9cb16..cdd153de35c4 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -272,6 +272,48 @@ rpm_msg_ram: memory@60000 {
 			reg = <0x00060000 0x6000>;
 		};
 
+		usb3_phy: phy@78000 {
+			compatible = "qcom,usb-ssphy";
+			reg = <0x00078000 0x400>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "ref", "ahb", "pipe";
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "com", "phy";
+			status = "disabled";
+		};
+
+		usb2_phy_prim: phy@7a000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0007a000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+				 <&gcc GCC_USB2A_PHY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		usb2_phy_sec: phy@7c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0007c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
 		qfprom: qfprom@a4000 {
 			compatible = "qcom,qfprom";
 			reg = <0x000a4000 0x1000>;
@@ -379,6 +421,64 @@ glink-edge {
 			};
 		};
 
+		usb3: usb@7678800 {
+			compatible = "qcom,dwc3";
+			reg = <0x07678800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "core", "iface", "sleep", "mock_utmi";
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+			status = "disabled";
+
+			dwc3@7580000 {
+				compatible = "snps,dwc3";
+				reg = <0x07580000 0xcd00>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy_sec>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				dr_mode = "otg";
+			};
+		};
+
+		usb2: usb@79b8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x079b8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>,
+				 <&gcc GCC_PCNOC_USB2_CLK>,
+				 <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "core", "iface", "sleep", "mock_utmi";
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+			status = "disabled";
+
+			dwc3@78c0000 {
+				compatible = "snps,dwc3";
+				reg = <0x078c0000 0xcc00>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy_prim>;
+				phy-names = "usb2-phy";
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				dr_mode = "peripheral";
+			};
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,qcs404-pinctrl";
 			reg = <0x01000000 0x200000>,
-- 
2.25.0

[PATCH v4 12/18] arm64: dts: qcom: qcs404-evb: Define VBUS detect pin

[Bryan O'Donoghue]

VBUS present/absent is presented to the SoC via a GPIO on the EVB. Define
the pin mapping for later use by gpio-usb-conn.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 501a7330dbc8..6d53dc342f97 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -4,6 +4,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include "qcs404.dtsi"
 #include "pms405.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	aliases {
@@ -270,6 +272,18 @@ rclk {
 	};
 };
 
+&pms405_gpios {
+	usb3_vbus_pin: usb3-vbus-pin {
+		pinconf {
+			pins = "gpio12";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			power-source = <1>;
+		};
+	};
+};
+
 &wifi {
 	status = "okay";
 	vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>;
-- 
2.25.0

[PATCH v4 13/18] arm64: dts: qcom: qcs404-evb: Define VBUS boost pin

[Bryan O'Donoghue]

An external regulator is used to trigger VBUS on/off via GPIO. This patch
defines the relevant GPIO in the EVB dts.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 6d53dc342f97..b6147b5ab5cb 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -273,6 +273,14 @@ rclk {
 };
 
 &pms405_gpios {
+	usb_vbus_boost_pin: usb-vbus-boost-pin {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <1>;
+		};
+	};
 	usb3_vbus_pin: usb3-vbus-pin {
 		pinconf {
 			pins = "gpio12";
-- 
2.25.0

[PATCH v4 14/18] arm64: dts: qcom: qcs404-evb: Define USB ID pin

[Bryan O'Donoghue]

The USB ID pin is used to tell if a system is a Host or a Device. For our
purposes we will bind this pin into gpio-usb-conn later.

For now define the pin with its pinmux.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index b6147b5ab5cb..abfb2a9a37e9 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -270,6 +270,20 @@ rclk {
 			bias-pull-down;
 		};
 	};
+
+	usb3_id_pin: usb3-id-pin {
+		pinmux {
+			pins = "gpio116";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio116";
+			drive-strength = <2>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
 };
 
 &pms405_gpios {
-- 
2.25.0

[PATCH v4 15/18] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator

[Bryan O'Donoghue]

VBUS is supplied by an external regulator controlled by a GPIO pin. This
patch models the regulator as regulator-usb3-vbus.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index abfb2a9a37e9..01ef59e8e5b7 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -33,6 +33,18 @@ vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
+
+	usb3_vbus_reg: regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_BOOST_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_vbus_boost_pin>;
+		vin-supply = <&vph_pwr>;
+		enable-active-high;
+	};
 };
 
 &blsp1_uart3 {
-- 
2.25.0

[PATCH v4 16/18] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage

[Bryan O'Donoghue]

Rather than set the minimum microvolt for this regulator in the USB SS PHY
driver, set it in the DTS.

Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 01ef59e8e5b7..0fff50f755ef 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -199,7 +199,7 @@ vreg_l11_sdc2: l11 {
 		};
 
 		vreg_l12_3p3: l12 {
-			regulator-min-microvolt = <2968000>;
+			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 		};
 
-- 
2.25.0

[PATCH v4 17/18] arm64: dts: qcom: qcs404-evb: Enable secondary USB controller

[Bryan O'Donoghue]

This patch enables the second DWC3 controller which has one USB Hi-Speed
PHY attached to it.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 0fff50f755ef..07d6d793a922 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -318,6 +318,17 @@ pinconf {
 	};
 };
 
+&usb2 {
+	status = "okay";
+};
+
+&usb2_phy_sec {
+	vdd-supply = <&vreg_l4_1p2>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	vdda3p3-supply = <&vreg_l12_3p3>;
+	status = "okay";
+};
+
 &wifi {
 	status = "okay";
 	vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>;
-- 
2.25.0

[PATCH v4 18/18] arm64: dts: qcom: qcs404-evb: Enable primary USB controller

[Bryan O'Donoghue]

This patch enables the primary USB controller which has

- One USB3 SS PHY using gpio-usb-conn
- One USB2 HS PHY in device mode only and no connector driver
  associated.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 29 ++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 07d6d793a922..4045d3000da6 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -329,6 +329,35 @@ &usb2_phy_sec {
 	status = "okay";
 };
 
+&usb3 {
+	status = "okay";
+	dwc3@7580000 {
+		usb-role-switch;
+		usb_con: connector {
+			compatible = "gpio-usb-b-connector";
+			label = "USB-C";
+			id-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+			vbus-supply = <&usb3_vbus_reg>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb3_id_pin>, <&usb3_vbus_pin>;
+			status = "okay";
+		};
+	};
+};
+
+&usb2_phy_prim {
+	vdd-supply = <&vreg_l4_1p2>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	vdda3p3-supply = <&vreg_l12_3p3>;
+	status = "okay";
+};
+
+&usb3_phy {
+	vdd-supply = <&vreg_l3_1p05>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	status = "okay";
+};
+
 &wifi {
 	status = "okay";
 	vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>;
-- 
2.25.0