Re: [PATCH 1/2] bus: Add DT bindings for Integrator/AP logical modules

[Rob Herring <robh@kernel.org>]

On Thu, 13 Feb 2020 13:46:19 +0100, Linus Walleij wrote:
> This adds YAML device tree bindings for the Integrator/AP
> logical modules. These are plug-in tiles used typically for
> FPGA prototyping.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  .../bindings/bus/arm,integrator-ap-lm.yaml    | 89 +++++++++++++++++++
>  1 file changed, 89 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.example.dt.yaml: im-pd1@0,0: $nodename:0: 'im-pd1@0,0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.example.dt.yaml: uart@c0100000: $nodename:0: 'uart@c0100000' does not match '^serial(@[0-9a-f,]+)*$'

See https://patchwork.ozlabs.org/patch/1237467
Please check and re-submit.