devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Sasha Levin <sashal@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org
Subject: [PATCH AUTOSEL 5.4 262/459] ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP
Date: Fri, 14 Feb 2020 10:58:32 -0500	[thread overview]
Message-ID: <20200214160149.11681-262-sashal@kernel.org> (raw)
In-Reply-To: <20200214160149.11681-1-sashal@kernel.org>

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit c3dd3315ab58b2cfa1916df55b0d0f9fbd94266f ]

The clock setup on Meson8 cannot achieve a Mali frequency of exactly
182.15MHz. The vendor driver uses "FCLK_DIV7 / 1" for this frequency,
which translates to 2550MHz / 7 / 1 = 364285714Hz.
Update the GPU operating point to that specific frequency to not confuse
myself when comparing the frequency from the .dts with the actual clock
rate on the system.

Fixes: c3ea80b6138cae ("ARM: dts: meson8b: add the Mali-450 MP2 GPU")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 099bf8e711c94..1e8c5d7bc824a 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -125,8 +125,8 @@
 			opp-hz = /bits/ 64 <255000000>;
 			opp-microvolt = <1100000>;
 		};
-		opp-364300000 {
-			opp-hz = /bits/ 64 <364300000>;
+		opp-364285714 {
+			opp-hz = /bits/ 64 <364285714>;
 			opp-microvolt = <1100000>;
 		};
 		opp-425000000 {
-- 
2.20.1


  parent reply	other threads:[~2020-02-14 17:30 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214160149.11681-1-sashal@kernel.org>
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 050/459] arm64: dts: marvell: clearfog-gt-8k: fix switch cpu port node Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 063/459] dt-bindings: iio: adc: ad7606: Fix wrong maxItems value Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 148/459] arm64: dts: rockchip: Fix NanoPC-T4 cooling maps Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 150/459] arm64: dts: uDPU: fix broken ethernet Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 159/459] arm64: dts: allwinner: H6: Add PMU mode Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 160/459] arm64: dts: allwinner: H5: Add PMU node Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 161/459] arm: dts: allwinner: H3: " Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 163/459] ARM: dts: at91: Reenable UART TX pull-ups Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 165/459] arm64: dts: qcom: msm8998: Fix tcsr syscon size Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 167/459] arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 173/459] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 174/459] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 214/459] ARM: dts: r8a7779: Add device node for ARM global timer Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 215/459] arm64: dts: renesas: r8a77990: ebisu: Remove clkout-lr-synchronous from sound Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 218/459] arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 261/459] ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP Sasha Levin
2020-02-14 15:58 ` Sasha Levin [this message]
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 267/459] ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 277/459] ARM: dts: at91: sama5d3: fix maximum peripheral clock rates Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 278/459] ARM: dts: at91: sama5d3: define clock rate range for tcb1 Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 288/459] arm64: dts: rockchip: fix dwmmc clock name for px30 Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 289/459] arm64: dts: rockchip: add reg property to brcmf sub-nodes Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 290/459] ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 304/459] ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 342/459] arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 387/459] ARM: dts: am43xx: add support for clkout1 clock Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214160149.11681-262-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).