[PATCH 5/7] tty: serial: fsl_lpuart: add LS1028A support

[Michael Walle <michael@walle.cc>]

The LS1028A uses little endian register access and has a different FIFO
size encoding.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 drivers/tty/serial/fsl_lpuart.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index fd9f60d0817a..6953eea166dc 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -234,6 +234,7 @@ static DEFINE_IDA(fsl_lpuart_ida);
 enum lpuart_type {
 	VF610_LPUART,
 	LS1021A_LPUART,
+	LS1028A_LPUART,
 	IMX7ULP_LPUART,
 	IMX8QXP_LPUART,
 };
@@ -278,11 +279,16 @@ static const struct lpuart_soc_data vf_data = {
 	.iotype = UPIO_MEM,
 };
 
-static const struct lpuart_soc_data ls_data = {
+static const struct lpuart_soc_data ls1021a_data = {
 	.devtype = LS1021A_LPUART,
 	.iotype = UPIO_MEM32BE,
 };
 
+static const struct lpuart_soc_data ls1028a_data = {
+	.devtype = LS1028A_LPUART,
+	.iotype = UPIO_MEM32,
+};
+
 static struct lpuart_soc_data imx7ulp_data = {
 	.devtype = IMX7ULP_LPUART,
 	.iotype = UPIO_MEM32,
@@ -297,7 +303,8 @@ static struct lpuart_soc_data imx8qxp_data = {
 
 static const struct of_device_id lpuart_dt_ids[] = {
 	{ .compatible = "fsl,vf610-lpuart",	.data = &vf_data, },
-	{ .compatible = "fsl,ls1021a-lpuart",	.data = &ls_data, },
+	{ .compatible = "fsl,ls1021a-lpuart",	.data = &ls1021a_data, },
+	{ .compatible = "fsl,ls1028a-lpuart",	.data = &ls1028a_data, },
 	{ .compatible = "fsl,imx7ulp-lpuart",	.data = &imx7ulp_data, },
 	{ .compatible = "fsl,imx8qxp-lpuart",	.data = &imx8qxp_data, },
 	{ /* sentinel */ }
@@ -307,6 +314,11 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
 /* Forward declare this for the dma callbacks*/
 static void lpuart_dma_tx_complete(void *arg);
 
+static inline bool is_ls1028a_lpuart(struct lpuart_port *sport)
+{
+	return sport->devtype == LS1028A_LPUART;
+}
+
 static inline bool is_imx8qxp_lpuart(struct lpuart_port *sport)
 {
 	return sport->devtype == IMX8QXP_LPUART;
@@ -1589,6 +1601,17 @@ static int lpuart32_startup(struct uart_port *port)
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 
+	/*
+	 * The LS1028A has a fixed length of 16 words. Although it supports the
+	 * RX/TXSIZE fields their encoding is different. Eg the reference manual
+	 * states 0b101 is 16 words.
+	 */
+	if (is_ls1028a_lpuart(sport)) {
+		sport->rxfifo_size = 16;
+		sport->txfifo_size = 16;
+		sport->port.fifosize = sport->txfifo_size;
+	}
+
 	lpuart32_setup_watermark_enable(sport);
 
 
-- 
2.20.1