From: Michael Walle <michael@walle.cc>
To: linux-serial@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Jiri Slaby <jslaby@suse.com>, Peng Fan <peng.fan@nxp.com>,
Vabhav Sharma <vabhav.sharma@nxp.com>,
Michael Walle <michael@walle.cc>
Subject: [PATCH v2 9/9] arm64: dts: ls1028a: add missing LPUART nodes
Date: Fri, 21 Feb 2020 18:47:54 +0100 [thread overview]
Message-ID: <20200221174754.5295-10-michael@walle.cc> (raw)
In-Reply-To: <20200221174754.5295-1-michael@walle.cc>
The LS1028A has six LPUART controllers. Add the nodes.
This was tested on a custom board.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 73 +++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index f1909fee391d..3ece3f8446d3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -390,6 +390,79 @@
status = "disabled";
};
+
+ lpuart0: serial@2260000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2260000 0x0 0x1000>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 32>,
+ <&edma0 1 33>;
+ status = "disabled";
+ };
+
+ lpuart1: serial@2270000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2270000 0x0 0x1000>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 30>,
+ <&edma0 1 31>;
+ status = "disabled";
+ };
+
+ lpuart2: serial@2280000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2280000 0x0 0x1000>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 28>,
+ <&edma0 1 29>;
+ status = "disabled";
+ };
+
+ lpuart3: serial@2290000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2290000 0x0 0x1000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 26>,
+ <&edma0 1 27>;
+ status = "disabled";
+ };
+
+ lpuart4: serial@22a0000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x22a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 24>,
+ <&edma0 1 25>;
+ status = "disabled";
+ };
+
+ lpuart5: serial@22b0000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x22b0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 22>,
+ <&edma0 1 23>;
+ status = "disabled";
+ };
+
edma0: dma-controller@22c0000 {
#dma-cells = <2>;
compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
--
2.20.1
prev parent reply other threads:[~2020-02-21 17:48 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-21 17:47 [PATCH v2 0/9] tty: serial: fsl_lpuart various fixes and LS1028A support Michael Walle
2020-02-21 17:47 ` [PATCH v2 1/9] Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE" Michael Walle
2020-02-21 17:47 ` [PATCH v2 2/9] tty: serial: fsl_lpuart: free IDs allocated by IDA Michael Walle
2020-02-21 17:47 ` [PATCH v2 3/9] tty: serial: fsl_lpuart: handle EPROBE_DEFER for DMA Michael Walle
2020-02-27 22:34 ` Rob Herring
2020-02-27 22:48 ` Li Yang
2020-02-27 23:03 ` Rob Herring
2020-02-28 11:46 ` Michael Walle
2020-02-28 21:50 ` Michael Walle
2020-02-28 21:53 ` Li Yang
2020-02-21 17:47 ` [PATCH v2 4/9] tty: serial: fsl_lpuart: fix DMA mapping Michael Walle
2020-02-21 17:47 ` [PATCH v2 5/9] dt-bindings: serial: lpuart: add ls1028a compatibility Michael Walle
2020-02-26 21:37 ` Rob Herring
2020-02-21 17:47 ` [PATCH v2 6/9] tty: serial: fsl_lpuart: add LS1028A support Michael Walle
2020-02-21 17:47 ` [PATCH v2 7/9] tty: serial: fsl_lpuart: add LS1028A earlycon support Michael Walle
2020-02-21 17:47 ` [PATCH v2 8/9] arm64: dts: ls1028a: add "fsl,vf610-edma" compatible Michael Walle
2020-02-21 17:47 ` Michael Walle [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200221174754.5295-10-michael@walle.cc \
--to=michael@walle.cc \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=vabhav.sharma@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).