[PATCH 04/23] ARM: dts: Configure interconnect target module for omap4 venc

[Tony Lindgren <tony@atomide.com>]

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module and drop "ti,hwmods" peroperty as this module is a child node
of dispc and has no dependencies to to legacy platform data.

We must now also configure sys_clk for reset to complete, the top
level module only keeps optional clocks enabled for it's own reset.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap4.dtsi | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -506,13 +506,23 @@ rfbi: encoder@0  {
 					};
 				};
 
-				venc: encoder@3000 {
-					compatible = "ti,omap4-venc";
-					reg = <0x3000 0x1000>;
-					status = "disabled";
-					ti,hwmods = "dss_venc";
-					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
-					clock-names = "fck";
+				target-module@3000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x3000 0x4>;
+					reg-names = "rev";
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x3000 0x1000>;
+
+					venc: encoder@0 {
+						compatible = "ti,omap4-venc";
+						reg = <0 0x1000>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
+						clock-names = "fck";
+					};
 				};
 
 				dsi1: encoder@4000 {
-- 
2.25.1