[PATCH 05/23] ARM: dts: Configure interconnect target module for omap4 dsi1

[Tony Lindgren <tony@atomide.com>]

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module and drop "ti,hwmods" peroperty as this module is a child node
of dispc and has no dependencies to to legacy platform data.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap4.dtsi | 42 +++++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -525,18 +525,36 @@ venc: encoder@0 {
 					};
 				};
 
-				dsi1: encoder@4000 {
-					compatible = "ti,omap4-dsi";
-					reg = <0x4000 0x200>,
-					      <0x4200 0x40>,
-					      <0x4300 0x20>;
-					reg-names = "proto", "phy", "pll";
-					interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-					status = "disabled";
-					ti,hwmods = "dss_dsi1";
-					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
-					<&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
-					clock-names = "fck", "sys_clk";
+				target-module@4000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x4000 0x4>,
+					      <0x4010 0x4>,
+					      <0x4014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x4000 0x1000>;
+
+					dsi1: encoder@0 {
+						compatible = "ti,omap4-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x20>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+							 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+					};
 				};
 
 				dsi2: encoder@5000 {
-- 
2.25.1