[PATCH RESEND v3 01/15] arm64: dts: imx8qxp: add fallback compatible string for scu pd

[PATCH RESEND v3 01/15] arm64: dts: imx8qxp: add fallback compatible string for scu pd

[Dong Aisheng]

According to binding doc, add the fallback compatible string for
scu pd.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
 v2: new patch
---
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 9646a41e0532..dc3d408d091a 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -171,7 +171,7 @@
 		};
 
 		pd: imx8qx-pd {
-			compatible = "fsl,imx8qxp-scu-pd";
+			compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
 			#power-domain-cells = <1>;
 		};
 
-- 
2.23.0

[PATCH RESEND v3 02/15] arm64: dts: imx8qxp: move scu pd node before scu clock node

[Dong Aisheng]

SCU clock depends on SCU Power domain. So let's move scu pd node
before scu clock to make it probe earlier.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
 v2: new patch
---
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index dc3d408d091a..c716b7b81b36 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -153,6 +153,11 @@
 			  &lsio_mu1 1 3
 			  &lsio_mu1 3 3>;
 
+		pd: imx8qx-pd {
+			compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
 		clk: clock-controller {
 			compatible = "fsl,imx8qxp-clk";
 			#clock-cells = <1>;
@@ -170,11 +175,6 @@
 			#size-cells = <1>;
 		};
 
-		pd: imx8qx-pd {
-			compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
-			#power-domain-cells = <1>;
-		};
-
 		scu_key: scu-key {
 			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
 			linux,keycodes = <KEY_POWER>;
-- 
2.23.0

[PATCH RESEND v3 03/15] arm64: dts: imx8qxp: orginize dts in subsystems

[Dong Aisheng]

MX8 SoC is comprised of a few HW subsystems while some of them can be
reused in the different SoCs. So let's re-orginize them into subsystems
in device tree as well for the possible reuse of the common part.

Note, as there's still no devices of hsio subsys, so removed it
first instead of creating a subsys headfile with no devices.
They will be added back when new devices added.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v1->v3:
 * no changes except rebase
---
 .../boot/dts/freescale/imx8-ss-adma.dtsi      | 130 ++++++
 .../boot/dts/freescale/imx8-ss-conn.dtsi      |  89 ++++
 .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi |  19 +
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 138 ++++++
 .../boot/dts/freescale/imx8qxp-ss-adma.dtsi   |  41 ++
 .../boot/dts/freescale/imx8qxp-ss-conn.dtsi   |  25 ++
 .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi   |  65 +++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 396 +-----------------
 8 files changed, 517 insertions(+), 386 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
new file mode 100644
index 000000000000..28b8fc9a81d4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+adma_subsys: bus@59000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x59000000 0x0 0x59000000 0x2000000>;
+
+	adma_lpcg: clock-controller@59000000 {
+		reg = <0x59000000 0x2000000>;
+		#clock-cells = <1>;
+	};
+
+	adma_dsp: dsp@596e8000 {
+		compatible = "fsl,imx8qxp-dsp";
+		reg = <0x596e8000 0x88000>;
+		clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>,
+			<&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
+			<&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
+		clock-names = "ipg", "ocram", "core";
+		power-domains = <&pd IMX_SC_R_MU_13A>,
+			<&pd IMX_SC_R_MU_13B>,
+			<&pd IMX_SC_R_DSP>,
+			<&pd IMX_SC_R_DSP_RAM>;
+		mbox-names = "txdb0", "txdb1",
+			"rxdb0", "rxdb1";
+		mboxes = <&lsio_mu13 2 0>,
+			<&lsio_mu13 2 1>,
+			<&lsio_mu13 3 0>,
+			<&lsio_mu13 3 1>;
+		memory-region = <&dsp_reserved>;
+		status = "disabled";
+	};
+
+	adma_lpuart0: serial@5a060000 {
+		reg = <0x5a060000 0x1000>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
+			 <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
+		clock-names = "ipg", "baud";
+		power-domains = <&pd IMX_SC_R_UART_0>;
+		status = "disabled";
+	};
+
+	adma_lpuart1: serial@5a070000 {
+		reg = <0x5a070000 0x1000>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>,
+			 <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
+		clock-names = "ipg", "baud";
+		power-domains = <&pd IMX_SC_R_UART_1>;
+		status = "disabled";
+	};
+
+	adma_lpuart2: serial@5a080000 {
+		reg = <0x5a080000 0x1000>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>,
+			 <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
+		clock-names = "ipg", "baud";
+		power-domains = <&pd IMX_SC_R_UART_2>;
+		status = "disabled";
+	};
+
+	adma_lpuart3: serial@5a090000 {
+		reg = <0x5a090000 0x1000>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>,
+			 <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
+		clock-names = "ipg", "baud";
+		power-domains = <&pd IMX_SC_R_UART_3>;
+		status = "disabled";
+	};
+
+	adma_i2c0: i2c@5a800000 {
+		reg = <0x5a800000 0x4000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>;
+		clock-names = "per";
+		assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_0>;
+		status = "disabled";
+	};
+
+	adma_i2c1: i2c@5a810000 {
+		reg = <0x5a810000 0x4000>;
+		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>;
+		clock-names = "per";
+		assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_1>;
+		status = "disabled";
+	};
+
+	adma_i2c2: i2c@5a820000 {
+		reg = <0x5a820000 0x4000>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>;
+		clock-names = "per";
+		assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_2>;
+		status = "disabled";
+	};
+
+	adma_i2c3: i2c@5a830000 {
+		reg = <0x5a830000 0x4000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>;
+		clock-names = "per";
+		assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_3>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
new file mode 100644
index 000000000000..5cf357fb85ae
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+conn_subsys: bus@5b000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
+
+	conn_lpcg: clock-controller@5b200000 {
+		reg = <0x5b200000 0xb0000>;
+		#clock-cells = <1>;
+	};
+
+	usdhc1: mmc@5b010000 {
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5b010000 0x10000>;
+		clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
+		clock-names = "ipg", "per", "ahb";
+		power-domains = <&pd IMX_SC_R_SDHC_0>;
+		status = "disabled";
+	};
+
+	usdhc2: mmc@5b020000 {
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5b020000 0x10000>;
+		clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
+		clock-names = "ipg", "per", "ahb";
+		power-domains = <&pd IMX_SC_R_SDHC_1>;
+		fsl,tuning-start-tap = <20>;
+		fsl,tuning-step= <2>;
+		status = "disabled";
+	};
+
+	usdhc3: mmc@5b030000 {
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5b030000 0x10000>;
+		clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>;
+		clock-names = "ipg", "per", "ahb";
+		power-domains = <&pd IMX_SC_R_SDHC_2>;
+		status = "disabled";
+	};
+
+	fec1: ethernet@5b040000 {
+		reg = <0x5b040000 0x10000>;
+		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		power-domains = <&pd IMX_SC_R_ENET_0>;
+		status = "disabled";
+	};
+
+	fec2: ethernet@5b050000 {
+		reg = <0x5b050000 0x10000>;
+		interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>,
+			 <&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
new file mode 100644
index 000000000000..5ad2a31f0d90
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+ddr_subsys: bus@5c000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
+
+	ddr-pmu@5c020000 {
+	compatible = "fsl,imx8-ddr-pmu";
+		reg = <0x5c020000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
new file mode 100644
index 000000000000..00eaadbdcc0a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+lsio_subsys: bus@5d000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+
+	lsio_gpio0: gpio@5d080000 {
+		reg = <0x5d080000 0x10000>;
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_0>;
+	};
+
+	lsio_gpio1: gpio@5d090000 {
+		reg = <0x5d090000 0x10000>;
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_1>;
+	};
+
+	lsio_gpio2: gpio@5d0a0000 {
+		reg = <0x5d0a0000 0x10000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_2>;
+	};
+
+	lsio_gpio3: gpio@5d0b0000 {
+		reg = <0x5d0b0000 0x10000>;
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_3>;
+	};
+
+	lsio_gpio4: gpio@5d0c0000 {
+		reg = <0x5d0c0000 0x10000>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_4>;
+	};
+
+	lsio_gpio5: gpio@5d0d0000 {
+		reg = <0x5d0d0000 0x10000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_5>;
+	};
+
+	lsio_gpio6: gpio@5d0e0000 {
+		reg = <0x5d0e0000 0x10000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_6>;
+	};
+
+	lsio_gpio7: gpio@5d0f0000 {
+		reg = <0x5d0f0000 0x10000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_7>;
+	};
+
+	lsio_mu0: mailbox@5d1b0000 {
+		reg = <0x5d1b0000 0x10000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu1: mailbox@5d1c0000 {
+		reg = <0x5d1c0000 0x10000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+	};
+
+	lsio_mu2: mailbox@5d1d0000 {
+		reg = <0x5d1d0000 0x10000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu3: mailbox@5d1e0000 {
+		reg = <0x5d1e0000 0x10000>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu4: mailbox@5d1f0000 {
+		reg = <0x5d1f0000 0x10000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu13: mailbox@5d280000 {
+		reg = <0x5d280000 0x10000>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_MU_13A>;
+	};
+
+	lsio_lpcg: clock-controller@5d400000 {
+		reg = <0x5d400000 0x400000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
new file mode 100644
index 000000000000..5809324de8df
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&adma_lpcg {
+	compatible = "fsl,imx8qxp-lpcg-adma";
+};
+
+&adma_lpuart0 {
+	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+};
+
+&adma_lpuart1 {
+	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+};
+
+&adma_lpuart2 {
+	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+};
+
+&adma_lpuart3 {
+	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+};
+
+&adma_i2c0 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&adma_i2c1 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&adma_i2c2 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&adma_i2c3 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
new file mode 100644
index 000000000000..ea0cd518680b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&conn_lpcg {
+	compatible = "fsl,imx8qxp-lpcg-conn";
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&fec1 {
+	compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
+};
+
+&fec2 {
+	compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
new file mode 100644
index 000000000000..b02ae5df597f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&lsio_gpio0 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu13 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_lpcg {
+	compatible = "fsl,imx8qxp-lpcg-lsio";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index c716b7b81b36..e408d214943f 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2016 Freescale Semiconductor, Inc.
- * Copyright 2017-2018 NXP
+ * Copyright 2017-2019 NXP
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
@@ -213,389 +213,13 @@
 		clock-output-names = "xtal_24MHz";
 	};
 
-	adma_subsys: bus@59000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x59000000 0x0 0x59000000 0x2000000>;
-
-		adma_lpcg: clock-controller@59000000 {
-			compatible = "fsl,imx8qxp-lpcg-adma";
-			reg = <0x59000000 0x2000000>;
-			#clock-cells = <1>;
-		};
-
-		adma_dsp: dsp@596e8000 {
-			compatible = "fsl,imx8qxp-dsp";
-			reg = <0x596e8000 0x88000>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>,
-				<&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
-				<&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
-			clock-names = "ipg", "ocram", "core";
-			power-domains = <&pd IMX_SC_R_MU_13A>,
-				<&pd IMX_SC_R_MU_13B>,
-				<&pd IMX_SC_R_DSP>,
-				<&pd IMX_SC_R_DSP_RAM>;
-			mbox-names = "txdb0", "txdb1",
-				"rxdb0", "rxdb1";
-			mboxes = <&lsio_mu13 2 0>,
-				<&lsio_mu13 2 1>,
-				<&lsio_mu13 3 0>,
-				<&lsio_mu13 3 1>;
-			memory-region = <&dsp_reserved>;
-			status = "disabled";
-		};
-
-		adma_lpuart0: serial@5a060000 {
-			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
-			reg = <0x5a060000 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
-				 <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
-			clock-names = "ipg", "baud";
-			power-domains = <&pd IMX_SC_R_UART_0>;
-			status = "disabled";
-		};
-
-		adma_lpuart1: serial@5a070000 {
-			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
-			reg = <0x5a070000 0x1000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>,
-				 <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
-			clock-names = "ipg", "baud";
-			power-domains = <&pd IMX_SC_R_UART_1>;
-			status = "disabled";
-		};
-
-		adma_lpuart2: serial@5a080000 {
-			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
-			reg = <0x5a080000 0x1000>;
-			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>,
-				 <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
-			clock-names = "ipg", "baud";
-			power-domains = <&pd IMX_SC_R_UART_2>;
-			status = "disabled";
-		};
-
-		adma_lpuart3: serial@5a090000 {
-			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
-			reg = <0x5a090000 0x1000>;
-			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>,
-				 <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
-			clock-names = "ipg", "baud";
-			power-domains = <&pd IMX_SC_R_UART_3>;
-			status = "disabled";
-		};
-
-		adma_i2c0: i2c@5a800000 {
-			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
-			reg = <0x5a800000 0x4000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>;
-			clock-names = "per";
-			assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>;
-			assigned-clock-rates = <24000000>;
-			power-domains = <&pd IMX_SC_R_I2C_0>;
-			status = "disabled";
-		};
-
-		adma_i2c1: i2c@5a810000 {
-			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
-			reg = <0x5a810000 0x4000>;
-			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>;
-			clock-names = "per";
-			assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>;
-			assigned-clock-rates = <24000000>;
-			power-domains = <&pd IMX_SC_R_I2C_1>;
-			status = "disabled";
-		};
-
-		adma_i2c2: i2c@5a820000 {
-			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
-			reg = <0x5a820000 0x4000>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>;
-			clock-names = "per";
-			assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>;
-			assigned-clock-rates = <24000000>;
-			power-domains = <&pd IMX_SC_R_I2C_2>;
-			status = "disabled";
-		};
-
-		adma_i2c3: i2c@5a830000 {
-			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
-			reg = <0x5a830000 0x4000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>;
-			clock-names = "per";
-			assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>;
-			assigned-clock-rates = <24000000>;
-			power-domains = <&pd IMX_SC_R_I2C_3>;
-			status = "disabled";
-		};
-	};
-
-	conn_subsys: bus@5b000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
-
-		conn_lpcg: clock-controller@5b200000 {
-			compatible = "fsl,imx8qxp-lpcg-conn";
-			reg = <0x5b200000 0xb0000>;
-			#clock-cells = <1>;
-		};
-
-		usdhc1: mmc@5b010000 {
-			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x5b010000 0x10000>;
-			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
-			clock-names = "ipg", "per", "ahb";
-			power-domains = <&pd IMX_SC_R_SDHC_0>;
-			status = "disabled";
-		};
-
-		usdhc2: mmc@5b020000 {
-			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x5b020000 0x10000>;
-			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
-			clock-names = "ipg", "per", "ahb";
-			power-domains = <&pd IMX_SC_R_SDHC_1>;
-			fsl,tuning-start-tap = <20>;
-			fsl,tuning-step= <2>;
-			status = "disabled";
-		};
-
-		usdhc3: mmc@5b030000 {
-			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x5b030000 0x10000>;
-			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>;
-			clock-names = "ipg", "per", "ahb";
-			power-domains = <&pd IMX_SC_R_SDHC_2>;
-			status = "disabled";
-		};
-
-		fec1: ethernet@5b040000 {
-			compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
-			reg = <0x5b040000 0x10000>;
-			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>;
-			clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
-			fsl,num-tx-queues=<3>;
-			fsl,num-rx-queues=<3>;
-			power-domains = <&pd IMX_SC_R_ENET_0>;
-			status = "disabled";
-		};
-
-		fec2: ethernet@5b050000 {
-			compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
-			reg = <0x5b050000 0x10000>;
-			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>;
-			clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
-			fsl,num-tx-queues=<3>;
-			fsl,num-rx-queues=<3>;
-			power-domains = <&pd IMX_SC_R_ENET_1>;
-			status = "disabled";
-		};
-	};
-
-	ddr_subsyss: bus@5c000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
-
-		ddr-pmu@5c020000 {
-			compatible = "fsl,imx8-ddr-pmu";
-			reg = <0x5c020000 0x10000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	lsio_subsys: bus@5d000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
-
-		lsio_gpio0: gpio@5d080000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d080000 0x10000>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_0>;
-		};
-
-		lsio_gpio1: gpio@5d090000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d090000 0x10000>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_1>;
-		};
-
-		lsio_gpio2: gpio@5d0a0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0a0000 0x10000>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_2>;
-		};
-
-		lsio_gpio3: gpio@5d0b0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0b0000 0x10000>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_3>;
-		};
-
-		lsio_gpio4: gpio@5d0c0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0c0000 0x10000>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_4>;
-		};
-
-		lsio_gpio5: gpio@5d0d0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0d0000 0x10000>;
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_5>;
-		};
-
-		lsio_gpio6: gpio@5d0e0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0e0000 0x10000>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_6>;
-		};
-
-		lsio_gpio7: gpio@5d0f0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0f0000 0x10000>;
-			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_7>;
-		};
-
-		lsio_mu0: mailbox@5d1b0000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d1b0000 0x10000>;
-			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-			status = "disabled";
-		};
-
-		lsio_mu1: mailbox@5d1c0000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d1c0000 0x10000>;
-			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-		};
-
-		lsio_mu2: mailbox@5d1d0000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d1d0000 0x10000>;
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-			status = "disabled";
-		};
-
-		lsio_mu3: mailbox@5d1e0000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d1e0000 0x10000>;
-			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-			status = "disabled";
-		};
-
-		lsio_mu4: mailbox@5d1f0000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d1f0000 0x10000>;
-			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-			status = "disabled";
-		};
-
-		lsio_mu13: mailbox@5d280000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d280000 0x10000>;
-			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-			power-domains = <&pd IMX_SC_R_MU_13A>;
-		};
-
-		lsio_lpcg: clock-controller@5d400000 {
-			compatible = "fsl,imx8qxp-lpcg-lsio";
-			reg = <0x5d400000 0x400000>;
-			#clock-cells = <1>;
-		};
-	};
+	/* sorted in register address */
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
 };
+
+#include "imx8qxp-ss-adma.dtsi"
+#include "imx8qxp-ss-conn.dtsi"
+#include "imx8qxp-ss-lsio.dtsi"
-- 
2.23.0

[PATCH RESEND v3 04/15] arm64: dts: imx8: add lsio lpcg clocks

[Dong Aisheng]

Add lsio lpcg clocks

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v2->v3:
 * update to use clock-indices property instead of bit-offset property
v1->v2:
 * Use old SCU clock binding temporarily to avoid build warning due to SCU
   clock cell will be changed to 2.
 * add power domain property
---
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 156 +++++++++++++++++-
 1 file changed, 155 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 00eaadbdcc0a..e839aa8ab586 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -4,12 +4,29 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
 lsio_subsys: bus@5d000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
 
+	lsio_mem_clk: clock-lsio-mem {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "lsio_mem_clk";
+	};
+
+	lsio_bus_clk: clock-lsio-bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "lsio_bus_clk";
+	};
+
 	lsio_gpio0: gpio@5d080000 {
 		reg = <0x5d080000 0x10000>;
 		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
@@ -131,8 +148,145 @@ lsio_subsys: bus@5d000000 {
 		power-domains = <&pd IMX_SC_R_MU_13A>;
 	};
 
-	lsio_lpcg: clock-controller@5d400000 {
+	/* LPCG clocks */
+	lsio_lpcg: clock-controller-legacy@5d400000 {
 		reg = <0x5d400000 0x400000>;
 		#clock-cells = <1>;
 	};
+
+	pwm0_lpcg: clock-controller@5d400000 {
+		reg = <0x5d400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_LSIO_PWM0_CLK>, <&clk IMX_LSIO_PWM0_CLK>,
+			 <&clk IMX_LSIO_PWM0_CLK>, <&lsio_bus_clk>,
+			 <&clk IMX_LSIO_PWM0_CLK>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm0_lpcg_ipg_clk",
+				     "pwm0_lpcg_ipg_hf_clk",
+				     "pwm0_lpcg_ipg_s_clk",
+				     "pwm0_lpcg_ipg_slv_clk",
+				     "pwm0_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_0>;
+	};
+
+	pwm1_lpcg: clock-controller@5d410000 {
+		reg = <0x5d410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_LSIO_PWM1_CLK>, <&clk IMX_LSIO_PWM1_CLK>,
+			 <&clk IMX_LSIO_PWM1_CLK>, <&lsio_bus_clk>,
+			 <&clk IMX_LSIO_PWM1_CLK>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm1_lpcg_ipg_clk",
+				     "pwm1_lpcg_ipg_hf_clk",
+				     "pwm1_lpcg_ipg_s_clk",
+				     "pwm1_lpcg_ipg_slv_clk",
+				     "pwm1_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_1>;
+	};
+
+	pwm2_lpcg: clock-controller@5d420000 {
+		reg = <0x5d420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_LSIO_PWM2_CLK>, <&clk IMX_LSIO_PWM2_CLK>,
+			 <&clk IMX_LSIO_PWM2_CLK>, <&lsio_bus_clk>,
+			 <&clk IMX_LSIO_PWM2_CLK>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm2_lpcg_ipg_clk",
+				     "pwm2_lpcg_ipg_hf_clk",
+				     "pwm2_lpcg_ipg_s_clk",
+				     "pwm2_lpcg_ipg_slv_clk",
+				     "pwm2_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_2>;
+	};
+
+	pwm3_lpcg: clock-controller@5d430000 {
+		reg = <0x5d430000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_LSIO_PWM3_CLK>, <&clk IMX_LSIO_PWM3_CLK>,
+			 <&clk IMX_LSIO_PWM3_CLK>, <&lsio_bus_clk>,
+			 <&clk IMX_LSIO_PWM3_CLK>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm3_lpcg_ipg_clk",
+				     "pwm3_lpcg_ipg_hf_clk",
+				     "pwm3_lpcg_ipg_s_clk",
+				     "pwm3_lpcg_ipg_slv_clk",
+				     "pwm3_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_3>;
+	};
+
+	pwm4_lpcg: clock-controller@5d440000 {
+		reg = <0x5d440000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_LSIO_PWM4_CLK>, <&clk IMX_LSIO_PWM4_CLK>,
+			 <&clk IMX_LSIO_PWM4_CLK>, <&lsio_bus_clk>,
+			 <&clk IMX_LSIO_PWM4_CLK>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm4_lpcg_ipg_clk",
+				     "pwm4_lpcg_ipg_hf_clk",
+				     "pwm4_lpcg_ipg_s_clk",
+				     "pwm4_lpcg_ipg_slv_clk",
+				     "pwm4_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_4>;
+	};
+
+	pwm5_lpcg: clock-controller@5d450000 {
+		reg = <0x5d450000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_LSIO_PWM5_CLK>, <&clk IMX_LSIO_PWM5_CLK>,
+			 <&clk IMX_LSIO_PWM5_CLK>, <&lsio_bus_clk>,
+			 <&clk IMX_LSIO_PWM5_CLK>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm5_lpcg_ipg_clk",
+				     "pwm5_lpcg_ipg_hf_clk",
+				     "pwm5_lpcg_ipg_s_clk",
+				     "pwm5_lpcg_ipg_slv_clk",
+				     "pwm5_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_5>;
+	};
+
+	pwm6_lpcg: clock-controller@5d460000 {
+		reg = <0x5d460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_LSIO_PWM6_CLK>, <&clk IMX_LSIO_PWM6_CLK>,
+			 <&clk IMX_LSIO_PWM6_CLK>, <&lsio_bus_clk>,
+			 <&clk IMX_LSIO_PWM6_CLK>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm6_lpcg_ipg_clk",
+				     "pwm6_lpcg_ipg_hf_clk",
+				     "pwm6_lpcg_ipg_s_clk",
+				     "pwm6_lpcg_ipg_slv_clk",
+				     "pwm6_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_6>;
+	};
+
+	pwm7_lpcg: clock-controller@5d470000 {
+		reg = <0x5d470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_LSIO_PWM7_CLK>, <&clk IMX_LSIO_PWM7_CLK>,
+			 <&clk IMX_LSIO_PWM7_CLK>, <&lsio_bus_clk>,
+			 <&clk IMX_LSIO_PWM7_CLK>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm7_lpcg_ipg_clk",
+				     "pwm7_lpcg_ipg_hf_clk",
+				     "pwm7_lpcg_ipg_s_clk",
+				     "pwm7_lpcg_ipg_slv_clk",
+				     "pwm7_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_7>;
+	};
 };
-- 
2.23.0

[PATCH RESEND v3 05/15] arm64: dts: imx8: add conn lpcg clocks

[Dong Aisheng]

Add conn lpcg clocks

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v2->v3:
 * update to use clock-indices property instead of bit-offset property
v1->v2:
 * Use old SCU clock binding temporarily to avoid build warning due to SCU
   clock cell will be changed to 2.
 * add power domain propertyv1->v2:
---
 .../boot/dts/freescale/imx8-ss-conn.dtsi      | 104 +++++++++++++++++-
 1 file changed, 101 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index 5cf357fb85ae..66899c5feaac 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -4,15 +4,34 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
 conn_subsys: bus@5b000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
 
-	conn_lpcg: clock-controller@5b200000 {
-		reg = <0x5b200000 0xb0000>;
-		#clock-cells = <1>;
+	conn_axi_clk: clock-conn-axi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <333333333>;
+		clock-output-names = "conn_axi_clk";
+	};
+
+	conn_ahb_clk: clock-conn-ahb {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <166666666>;
+		clock-output-names = "conn_ahb_clk";
+	};
+
+	conn_ipg_clk: clock-conn-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <83333333>;
+		clock-output-names = "conn_ipg_clk";
 	};
 
 	usdhc1: mmc@5b010000 {
@@ -86,4 +105,83 @@ conn_subsys: bus@5b000000 {
 		power-domains = <&pd IMX_SC_R_ENET_1>;
 		status = "disabled";
 	};
+
+	/* LPCG clocks */
+	conn_lpcg: clock-controller-legacy@5b200000 {
+		reg = <0x5b200000 0xb0000>;
+		#clock-cells = <1>;
+	};
+
+	sdhc0_lpcg: clock-controller@5b200000 {
+		reg = <0x5b200000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_CONN_SDHC0_CLK>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "sdhc0_lpcg_per_clk",
+				     "sdhc0_lpcg_ipg_clk",
+				     "sdhc0_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_0>;
+	};
+
+	sdhc1_lpcg: clock-controller@5b210000 {
+		reg = <0x5b210000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_CONN_SDHC1_CLK>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "sdhc1_lpcg_per_clk",
+				     "sdhc1_lpcg_ipg_clk",
+				     "sdhc1_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_1>;
+	};
+
+	sdhc2_lpcg: clock-controller@5b220000 {
+		reg = <0x5b220000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_CONN_SDHC2_CLK>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "sdhc2_lpcg_per_clk",
+				     "sdhc2_lpcg_ipg_clk",
+				     "sdhc2_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_2>;
+	};
+
+	enet0_lpcg: clock-controller@5b230000 {
+		reg = <0x5b230000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_CONN_ENET0_ROOT_CLK>,
+			 <&clk IMX_CONN_ENET0_ROOT_CLK>,
+			 <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "enet0_ipg_root_clk",
+				     "enet0_tx_clk",
+				     "enet0_ahb_clk",
+				     "enet0_ipg_clk",
+				     "enet0_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_ENET_0>;
+	};
+
+	enet1_lpcg: clock-controller@5b240000 {
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_CONN_ENET1_ROOT_CLK>,
+			 <&clk IMX_CONN_ENET1_ROOT_CLK>,
+			 <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "enet1_ipg_root_clk",
+				     "enet1_tx_clk",
+				     "enet1_ahb_clk",
+				     "enet1_ipg_clk",
+				     "enet1_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
 };
-- 
2.23.0

[PATCH RESEND v3 06/15] arm64: dts: imx8: add adma lpcg clocks

[Dong Aisheng]

Add adma lpcg clocks

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v3->v4:
 * add missing lpcg headfile
v2->v3:
 * update to use clock-indices property instead of bit-offset property
v1->v2:
 * Use old SCU clock binding temporarily to avoid build warning due to SCU
   clock cell will be changed to 2.
 * add power domain property
---
 .../boot/dts/freescale/imx8-ss-adma.dtsi      | 122 ++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
index 28b8fc9a81d4..6bd194a98c36 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
@@ -4,17 +4,51 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
 adma_subsys: bus@59000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x59000000 0x0 0x59000000 0x2000000>;
 
+	dma_ipg_clk: clock-dma-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "dma_ipg_clk";
+	};
+
+	/* LPCG clocks */
 	adma_lpcg: clock-controller@59000000 {
 		reg = <0x59000000 0x2000000>;
 		#clock-cells = <1>;
 	};
 
+	dsp_lpcg: clock-controller@59580000 {
+		reg = <0x59580000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&dma_ipg_clk>,
+			 <&dma_ipg_clk>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_7>;
+		clock-output-names = "dsp_lpcg_adb_clk",
+				     "dsp_lpcg_ipg_clk",
+				     "dsp_lpcg_core_clk";
+		power-domains = <&pd IMX_SC_R_DSP>;
+	};
+
+	dsp_ram_lpcg: clock-controller@59590000 {
+		reg = <0x59590000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "dsp_ram_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_DSP_RAM>;
+	};
+
 	adma_dsp: dsp@596e8000 {
 		compatible = "fsl,imx8qxp-dsp";
 		reg = <0x596e8000 0x88000>;
@@ -80,6 +114,50 @@ adma_subsys: bus@59000000 {
 		status = "disabled";
 	};
 
+	uart0_lpcg: clock-controller@5a460000 {
+		reg = <0x5a460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_ADMA_UART0_CLK>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart0_lpcg_baud_clk",
+				     "uart0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_0>;
+	};
+
+	uart1_lpcg: clock-controller@5a470000 {
+		reg = <0x5a470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_ADMA_UART1_CLK>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart1_lpcg_baud_clk",
+				     "uart1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_1>;
+	};
+
+	uart2_lpcg: clock-controller@5a480000 {
+		reg = <0x5a480000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_ADMA_UART2_CLK>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart2_lpcg_baud_clk",
+				     "uart2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_2>;
+	};
+
+	uart3_lpcg: clock-controller@5a490000 {
+		reg = <0x5a490000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_ADMA_UART3_CLK>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart3_lpcg_baud_clk",
+				     "uart3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_3>;
+	};
+
 	adma_i2c0: i2c@5a800000 {
 		reg = <0x5a800000 0x4000>;
 		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
@@ -127,4 +205,48 @@ adma_subsys: bus@59000000 {
 		power-domains = <&pd IMX_SC_R_I2C_3>;
 		status = "disabled";
 	};
+
+	i2c0_lpcg: clock-controller@5ac00000 {
+		reg = <0x5ac00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_ADMA_I2C0_CLK>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c0_lpcg_clk",
+				     "i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_0>;
+	};
+
+	i2c1_lpcg: clock-controller@5ac10000 {
+		reg = <0x5ac10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_ADMA_I2C1_CLK>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c1_lpcg_clk",
+				     "i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_1>;
+	};
+
+	i2c2_lpcg: clock-controller@5ac20000 {
+		reg = <0x5ac20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_ADMA_I2C2_CLK>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c2_lpcg_clk",
+				     "i2c2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_2>;
+	};
+
+	i2c3_lpcg: clock-controller@5ac30000 {
+		reg = <0x5ac30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_ADMA_I2C3_CLK>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c3_lpcg_clk",
+				     "i2c3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_3>;
+	};
 };
-- 
2.23.0

[PATCH RESEND v3 09/15] arm64: dts: imx8qm: add lsio ss support

[Dong Aisheng]

The LSIO SS of MX8QM is exactly the same as MX8QXP. So we can fully
reuse the exist LSIO SS dtsi. Add <soc>-ss-lsio.dtsi with compatible
string updated according to imx8-ss-lsio.dtsi.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v2->v3:
 * no changes
v1->v2:
 * change to the new two cell scu clk binding
---
 .../boot/dts/freescale/imx8qm-ss-lsio.dtsi    | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
new file mode 100644
index 000000000000..6fe390641010
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&lsio_gpio0 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu13 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
-- 
2.23.0

[PATCH RESEND v3 10/15] arm64: dts: imx8qm: add conn ss support

[Dong Aisheng]

The CONN SS of MX8QM is mostly the same as MX8QXP except it has one more
USB HSIC module support. So we can fully reuse the exist CONN SS dtsi.
Add <soc>-ss-conn.dtsi with compatible string updated according to
imx8-ss-conn.dtsi.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v2->v3:
 * no changes
v1->v2:
 * change to the new two cell scu clk binding
---
 .../boot/dts/freescale/imx8qm-ss-conn.dtsi    | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
new file mode 100644
index 000000000000..00ae820d5175
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&fec1 {
+	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
+
+&fec2 {
+	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx7d-usdhc";
+};
-- 
2.23.0

[PATCH RESEND v3 12/15] arm64: dts: imx8qm: add dma ss support

[Dong Aisheng]

The DMA SS of MX8QM is mostly the same as the DMA part in MX8QXP ADMA SS
while it has one more instance for each of LPUART, ADC and LPI2C. And unlike
MX8QXP that flexcan clocks are shared between multiple CAN instances,
MX8QM has separate flexcan clock slice.

So we reuse the most part of common imx8-ss-dma.dtsi and add new things
based on it.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v2->v3:
 * use new clock-indices IDs
 * update lpuart fallback compatible string to fsl,imx8qxp-lpuart
v1->v2:
 * change to the new two cell scu clk binding
---
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
new file mode 100644
index 000000000000..bbe5f5ecfb92
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&dma_subsys {
+	uart4_lpcg: clock-controller@5a4a0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a4a0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_4 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart4_lpcg_baud_clk",
+				     "uart4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_4>;
+	};
+};
+
+&lpuart0 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&i2c0 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c1 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c2 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c3 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
-- 
2.23.0

[PATCH RESEND v3 13/15] arm64: dts: imx: add imx8qm common dts file

[Dong Aisheng]

The i.MX8QuadMax is a Dual (2x) Cortex-A72 and Quad (4x) Cortex-A53
proccessor with powerful graphic and multimedia features. It uses
the same architecture as MX8QXP, so many SS can be reused.
This patch adds i.MX8QuadMax SoC dtsi file.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v2->v3:
 * remove a typo change on imx8qxp.dtsi which is unrelated to this patch
 * include new imx8-lpcg.h
v1->v2:
 * change to the new two cell scu clk binding
---
 arch/arm64/boot/dts/freescale/imx8qm.dtsi | 180 ++++++++++++++++++++++
 1 file changed, 180 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
new file mode 100644
index 000000000000..87a4c3ec8861
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pads-imx8qm.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart0;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A72_0>;
+				};
+				core1 {
+					cpu = <&A72_1>;
+				};
+			};
+		};
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A72_0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&A72_L2>;
+		};
+
+		A72_1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&A72_L2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		A72_L2: l2-cache1 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xC0000>, /* GICR */
+		      <0x0 0x52000000 0 0x2000>,  /* GICC */
+		      <0x0 0x52010000 0 0x1000>,  /* GICH */
+		      <0x0 0x52020000 0 0x20000>; /* GICV */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	scu {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0", "tx1", "tx2", "tx3",
+			     "rx0", "rx1", "rx2", "rx3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 0 1
+			  &lsio_mu1 0 2
+			  &lsio_mu1 0 3
+			  &lsio_mu1 1 0
+			  &lsio_mu1 1 1
+			  &lsio_mu1 1 2
+			  &lsio_mu1 1 3>;
+
+		pd: imx8qx-pd {
+			compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8qm-iomuxc";
+		};
+
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-dma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8qm-ss-dma.dtsi"
+#include "imx8qm-ss-conn.dtsi"
+#include "imx8qm-ss-lsio.dtsi"
-- 
2.23.0

[PATCH RESEND v3 14/15] arm64: dts: imx: add imx8qm mek support

[Dong Aisheng]

The i.MX8QuadMax is a Dual (2x) Cortex-A72 and Quad (4x) Cortex-A53
proccessor with powerful graphic and multimedia features.
This patch adds i.MX8QuadMax MEK board support.

Note that MX8QM needs a special workaround for TLB flush due to a SoC
errata, otherwise there may be random crash if enable both clusters of
A72 and A53. As the errata workaround is still not in mainline, so we
disable A72 cluster first for MX8QM MEK.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v2->v3:
 * no changes
v1->v2:
 * copyright update to 2019, minor node name change
---
 arch/arm64/boot/dts/freescale/Makefile       |   1 +
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 144 +++++++++++++++++++
 2 files changed, 145 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 38e344a2f0ff..54508e3059a7 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
new file mode 100644
index 000000000000..ce9d3f0b98fc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "imx8qm.dtsi"
+
+/ {
+	model = "Freescale i.MX8QM MEK";
+	compatible = "fsl,imx8qm-mek", "fsl,imx8qm";
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+		/delete-node/ cpu@101;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_usdhc2_vmmc: usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
+			IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+			IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x06000020
+			IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020
+			IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020
+			IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020
+			IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020
+			IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x06000020
+			IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+			IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020
+			IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020
+			IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020
+			IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8QM_UART0_RX_DMA_UART0_RX				0x06000020
+			IMX8QM_UART0_TX_DMA_UART0_TX				0x06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041
+			IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD				0x00000021
+			IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021
+			IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021
+			IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021
+			IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021
+			IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021
+			IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021
+			IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021
+			IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021
+			IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE			0x00000041
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
+			IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
+			IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0			0x00000021
+			IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1			0x00000021
+			IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2			0x00000021
+			IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
+			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
+		>;
+	};
+};
-- 
2.23.0

Re: [PATCH RESEND v3 14/15] arm64: dts: imx: add imx8qm mek support

[Oliver Graute]

On 17/11/19, Dong Aisheng wrote:
> The i.MX8QuadMax is a Dual (2x) Cortex-A72 and Quad (4x) Cortex-A53
> proccessor with powerful graphic and multimedia features.
> This patch adds i.MX8QuadMax MEK board support.
> 
> Note that MX8QM needs a special workaround for TLB flush due to a SoC
> errata, otherwise there may be random crash if enable both clusters of
> A72 and A53. As the errata workaround is still not in mainline, so we
> disable A72 cluster first for MX8QM MEK.

can you point me to the errata workaround patch for the MMU/TLB Coherency
issue? I observe the same issue here with another imx8qm board.

Best Regards,

Oliver