From: Vladimir Oltean <olteanv@gmail.com>
To: broonie@kernel.org
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
shawnguo@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org, eha@deif.com, angelo@sysam.it,
andrew.smirnov@gmail.com, gustavo@embeddedor.com,
weic@nvidia.com, mhosny@nvidia.com, michael@walle.cc,
peng.ma@nxp.com
Subject: [PATCH 6/6] arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS
Date: Mon, 9 Mar 2020 16:56:24 +0200 [thread overview]
Message-ID: <20200309145624.10026-7-olteanv@gmail.com> (raw)
In-Reply-To: <20200309145624.10026-1-olteanv@gmail.com>
From: Vladimir Oltean <vladimir.oltean@nxp.com>
For debugging, it is useful to have access to the DSPI controller
signals. On the reference design board, these are exported to either the
mikroBUS1 or mikroBUS2 connector (according to the CPLD register
BRDCFG3[SPI3]).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index bb7ba3bcbe56..43f403b30dae 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -83,6 +83,20 @@
};
};
+&dspi2 {
+ bus-num = <2>;
+ status = "okay";
+
+ /* mikroBUS1 */
+ spidev@0 {
+ compatible = "spidev";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <100>;
+ };
+};
+
&esdhc {
sd-uhs-sdr104;
sd-uhs-sdr50;
--
2.17.1
next prev parent reply other threads:[~2020-03-09 14:57 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-09 14:56 [PATCH 0/6] NXP DSPI bugfixes and support for LS1028A Vladimir Oltean
2020-03-09 14:56 ` [PATCH 1/6] spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR Vladimir Oltean
2020-03-09 18:05 ` Michael Walle
2020-03-09 18:09 ` Vladimir Oltean
2020-03-09 14:56 ` [PATCH 2/6] spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA Vladimir Oltean
2020-03-09 17:59 ` Michael Walle
2020-03-09 18:07 ` Vladimir Oltean
2020-03-09 18:19 ` Michael Walle
2020-03-09 18:31 ` Vladimir Oltean
2020-03-09 14:56 ` [PATCH 3/6] spi: spi-fsl-dspi: Fix oper_word_size of zero for DMA mode Vladimir Oltean
2020-03-09 14:56 ` [PATCH 4/6] spi: spi-fsl-dspi: Add support for LS1028A Vladimir Oltean
2020-03-09 18:38 ` Michael Walle
2020-03-09 18:51 ` Vladimir Oltean
2020-03-09 14:56 ` [PATCH 5/6] arm64: dts: ls1028a: Specify the DMA channels for the DSPI controllers Vladimir Oltean
2020-03-09 19:06 ` Michael Walle
2020-03-09 19:59 ` Vladimir Oltean
2020-03-09 20:17 ` Michael Walle
2020-03-09 14:56 ` Vladimir Oltean [this message]
2020-03-09 18:35 ` [PATCH 6/6] arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS Michael Walle
2020-03-09 18:50 ` Vladimir Oltean
2020-03-09 18:58 ` Michael Walle
2020-03-09 18:03 ` [PATCH 0/6] NXP DSPI bugfixes and support for LS1028A Michael Walle
2020-03-09 18:14 ` Vladimir Oltean
2020-03-09 18:31 ` Michael Walle
2020-03-09 18:48 ` Vladimir Oltean
2020-03-09 18:59 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200309145624.10026-7-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=andrew.smirnov@gmail.com \
--cc=angelo@sysam.it \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eha@deif.com \
--cc=gustavo@embeddedor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mhosny@nvidia.com \
--cc=michael@walle.cc \
--cc=peng.ma@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=weic@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).