From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/4] arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodes
Date: Thu, 12 Mar 2020 18:14:40 +0100 [thread overview]
Message-ID: <20200312171441.21144-3-jbx6244@gmail.com> (raw)
In-Reply-To: <20200312171441.21144-1-jbx6244@gmail.com>
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff5c0000:
'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
'clock-names' is not a valid property name for usb_host nodes with
compatible string 'generic-ehci', so remove them.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ehci.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 1 -
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1 -
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 1 -
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ----
4 files changed, 7 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 1bbed660f..be5569b74 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -881,7 +881,6 @@
reg = <0x0 0xff340000 0x0 0x10000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
- clock-names = "usbhost";
phys = <&u2phy_host>;
phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index d9490f417..ac08d2b70 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -967,7 +967,6 @@
reg = <0x0 0xff5c0000 0x0 0x10000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy>;
- clock-names = "usbhost", "utmi";
phys = <&u2phy_host>;
phy-names = "usb";
status = "disabled";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 2079e877a..1ebb0eef4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -513,7 +513,6 @@
reg = <0x0 0xff500000 0x0 0x100>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>;
- clock-names = "usbhost";
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 63355ba7c..bbae92ef3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -349,8 +349,6 @@
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
<&u2phy0>;
- clock-names = "usbhost", "arbiter",
- "utmi";
phys = <&u2phy0_host>;
phy-names = "usb";
status = "disabled";
@@ -375,8 +373,6 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
<&u2phy1>;
- clock-names = "usbhost", "arbiter",
- "utmi";
phys = <&u2phy1_host>;
phy-names = "usb";
status = "disabled";
--
2.11.0
next prev parent reply other threads:[~2020-03-12 17:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 17:14 [PATCH 1/4] ARM: dts: rockchip: remove clock-names property from 'generic-ehci' nodes Johan Jonker
2020-03-12 17:14 ` [PATCH 2/4] ARM: dts: rockchip: remove clock-names property from 'generic-ohci' nodes Johan Jonker
2020-03-17 0:28 ` Heiko Stuebner
2020-03-12 17:14 ` Johan Jonker [this message]
2020-03-17 0:52 ` [PATCH 3/4] arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodes Heiko Stuebner
2020-03-12 17:14 ` [PATCH 4/4] arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes Johan Jonker
2020-03-17 0:52 ` Heiko Stuebner
2020-03-17 0:28 ` [PATCH 1/4] ARM: dts: rockchip: remove clock-names property from 'generic-ehci' nodes Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200312171441.21144-3-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox