Re: [PATCH 3/6] dt-bindings: Add Baikal-T1 L2-cache Control Block dts bindings file

[Rob Herring <robh@kernel.org>]

On Fri, Mar 06, 2020 at 04:07:18PM +0300, Sergey.Semin@baikalelectronics.ru wrote:
> From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> 
> There is a single register provided by the SoC system controller,
> which can be used to tune the L2-cache up. It only provides a way
> to change the L2-RAM access latencies. So aside from the MMIO region
> with that setting and "be,bt1-l2-ctl" compatible string the device
> node can be optionally equipped with the properties of Tag/Data/WS
> latencies.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: Paul Burton <paulburton@kernel.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Olof Johansson <olof@lixom.net>
> Cc: soc@kernel.org
> ---
>  .../bindings/soc/baikal-t1/be,bt1-l2-ctl.yaml | 108 ++++++++++++++++++
>  1 file changed, 108 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/baikal-t1/be,bt1-l2-ctl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/baikal-t1/be,bt1-l2-ctl.yaml b/Documentation/devicetree/bindings/soc/baikal-t1/be,bt1-l2-ctl.yaml
> new file mode 100644
> index 000000000000..8769b3fa517c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/baikal-t1/be,bt1-l2-ctl.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license

> +#
> +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
> +#
> +# Baikal-T1 L2-cache Control Block Device Tree Bindings.
> +#
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/baikal-t1/be,bt1-l2-ctl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Baikal-T1 L2-cache Control Block
> +
> +maintainers:
> +  - Serge Semin <fancer.lancer@gmail.com>
> +
> +description: |
> +  Baikal-T1 exposes a few settings to tune the MIPS P5600 CM2 L2-cache
> +  performance up. In particular it's possible to change the Tag, Data and
> +  Way-select RAM access latencies. This bindings file describes the system
> +  controller block, which provides an interface to set the tuning up.
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: syscon
> +    then:
> +      $ref: ../../mfd/syscon.yaml#
> +    else:
> +      properties:
> +        reg-io-width: false
> +
> +        little-endian: false
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - description: P5600 CM2 L2-cache RAM external configuration block.
> +        const: be,bt1-l2-ctl
> +      - description: P5600 CM2 L2-cache RAM system controller block.
> +        items:
> +          - const: be,bt1-l2-ctl
> +          - const: syscon

Why is this conditional? Different h/w?

> +
> +  reg:
> +    description: MMIO register with MIPS P5600 CM2 L2-cache RAM settings.

You can drop this.

> +    maxItems: 1
> +
> +  be,l2-ws-latency:
> +    description: Cycles of latency for Way-select RAM accesses.
> +    default: 0
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 0
> +        maximum: 3

These should be at the same level as 'default' or default moved here (I 
prefer the former). IOW, only $ref has to be under 'allOf'.

> +
> +  be,l2-tag-latency:
> +    description: Cycles of latency for Tag RAM accesses.
> +    default: 0
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 0
> +        maximum: 3
> +
> +  be,l2-data-latency:
> +    description: Cycles of latency for Data RAM accesses.
> +    default: 1
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 0
> +        maximum: 3
> +
> +  reg-io-width:
> +    const: 4
> +
> +  little-endian: true
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    l2_ctl1: l2@1F04D028 {

lowercase hex.

> +      compatible = "be,bt1-l2-ctl";
> +      reg = <0x1F04D028 0x004>;
> +
> +      be,l2-ws-latency = <0>;
> +      be,l2-tag-latency = <0>;
> +      be,l2-data-latency = <1>;
> +    };
> +  - |
> +    l2_ctl2: l2@1F04D028 {
> +      compatible = "be,bt1-l2-ctl", "syscon";
> +      reg = <0x1F04D028 0x004>;
> +
> +      be,l2-ws-latency = <0>;
> +      be,l2-tag-latency = <0>;
> +      be,l2-data-latency = <1>;
> +
> +      little-endian;
> +      reg-io-width = <4>;
> +    };
> +...
> -- 
> 2.25.1
>