From: Jisheng Zhang <jszhang3@mail.ustc.edu.cn>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 3/4] dt-bindings: mp886x: Document MP8867 support
Date: Fri, 13 Mar 2020 22:45:27 +0800 [thread overview]
Message-ID: <20200313224527.3b4ae79b@xhacker> (raw)
From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
MP8867 is an I2C-controlled adjustable voltage regulator made by
Monolithic Power Systems. The difference between MP8867 and MP8869
are:
1.If V_BOOT, the vref of MP8869 is fixed at 600mv while vref of MP8867
is determined by the I2C control.
2.For MP8867, when setting voltage, if the steps is within 5, we need
to manually set the GO_BIT to 0.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
Documentation/devicetree/bindings/regulator/mp886x.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt
index 6858e38..5518678 100644
--- a/Documentation/devicetree/bindings/regulator/mp886x.txt
+++ b/Documentation/devicetree/bindings/regulator/mp886x.txt
@@ -1,7 +1,9 @@
-Monolithic Power Systems MP8869 voltage regulator
+Monolithic Power Systems MP8867/MP8869 voltage regulator
Required properties:
-- compatible: "mps,mp8869";
+- compatible: Must be one of the following.
+ "mps,mp8867",
+ "mps,mp8869",
- reg: I2C slave address.
- enable-gpios: enable gpios.
- mps,fb-voltage-divider: An array of two integers containing the resistor
--
2.7.4
reply other threads:[~2020-03-13 14:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200313224527.3b4ae79b@xhacker \
--to=jszhang3@mail.ustc.edu.cn \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox