[PATCH v1 1/3] dt-bindings: display: drop data-mapping from panel-dpi

[Sam Ravnborg <sam@ravnborg.org>]

data-mapping may not be the best way to describe the
data format used between panels and display interface.

Drop it from the panel-dpi binding so we do not start to rely on it.
We can then work out how to best describe this mapping and when
we know it, we can add it to this binding.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/display/panel/panel-dpi.yaml   | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
index f63870384c00..0cd74c8dab42 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
@@ -21,15 +21,6 @@ properties:
       - {}
       - const: panel-dpi
 
-  data-mapping:
-    enum:
-      - rgb24
-      - rgb565
-      - bgr666
-    description: |
-      Describes the media format, how the display panel is connected
-      to the display interface.
-
   backlight: true
   enable-gpios: true
   height-mm: true
@@ -52,7 +43,6 @@ examples:
         compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
         label = "osddisplay";
         power-supply = <&vcc_supply>;
-        data-mapping = "rgb565";
         backlight = <&backlight>;
 
         port {
-- 
2.20.1