[PATCH AUTOSEL 4.19 02/20] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties

[PATCH AUTOSEL 4.19 02/20] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit bcbf53a0dab50980867476994f6079c1ec5bb3a3 ]

The sram-node compatible properties have mistakingly combined the
model-specific string with the generic "mtd-ram" string.

Note that neither "cy7c1019dv33-10zsxi, mtd-ram" or
"cy7c1019dv33-10zsxi" are used by any in-kernel driver and they are
not present in any binding.

The physmap driver will however bind to platform devices that specify
"mtd-ram".

Fixes: fc48e76489fd ("ARM: dts: imx6: Add support for Toradex Colibri iMX6 module")
Cc: Sanchayan Maity <maitysanchayan@gmail.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 9de45a7173561..50a7ec0875535 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -234,7 +234,7 @@
 
 	/* SRAM on Colibri nEXT_CS0 */
 	sram@0,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
 		reg = <0 0 0x00010000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -245,7 +245,7 @@
 
 	/* SRAM on Colibri nEXT_CS1 */
 	sram@1,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
 		reg = <1 0 0x00010000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 05/20] ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 27f13774654ea6bd0b6fc9b97cce8d19e5735661 ]

'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI
devices not described in the DT. Certain DRA7 platforms (e.g., DRA76)
has RAM above 32-bit boundary (accessible with LPAE config) though the
PCIe bridge will be able to access only 32-bits. Add 'dma-ranges'
property in PCIe RC DT nodes to indicate the host bridge can access
only 32 bits.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/dra7.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 7ce24b282d421..c1ef3201950ae 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -324,6 +324,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -376,6 +377,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
-- 
2.20.1