* [PATCHv2 0/2] Convert stm32 dwmac to DT schema
@ 2020-03-17 15:17 Christophe Roullier
2020-03-17 15:17 ` [PATCHv2 1/2] dt-bindings: net: dwmac: increase 'maxItems' for 'clocks', 'clock-names' properties Christophe Roullier
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Christophe Roullier @ 2020-03-17 15:17 UTC (permalink / raw)
To: davem, robh+dt, mark.rutland, mripard, martin.blumenstingl,
alexandru.ardelean, narmstrong, mcoquelin.stm32, alexandre.torgue
Cc: devicetree, netdev, christophe.roullier, linux-kernel,
linux-stm32, linux-arm-kernel
Convert stm32 dwmac to DT schema
Christophe Roullier (2):
dt-bindings: net: dwmac: increase 'maxItems' for 'clocks',
'clock-names' properties
dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema
v1->v2:
update from Rob (solve checkpatch errors with trailing WS,
rename "Example", Wrap lines)
.../devicetree/bindings/net/snps,dwmac.yaml | 8 +-
.../devicetree/bindings/net/stm32-dwmac.txt | 44 -----
.../devicetree/bindings/net/stm32-dwmac.yaml | 160 ++++++++++++++++++
3 files changed, 167 insertions(+), 45 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml
--
2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCHv2 1/2] dt-bindings: net: dwmac: increase 'maxItems' for 'clocks', 'clock-names' properties 2020-03-17 15:17 [PATCHv2 0/2] Convert stm32 dwmac to DT schema Christophe Roullier @ 2020-03-17 15:17 ` Christophe Roullier 2020-03-17 15:17 ` [PATCHv2 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema Christophe Roullier 2020-03-24 7:04 ` [PATCHv2 0/2] " Christophe ROULLIER 2 siblings, 0 replies; 5+ messages in thread From: Christophe Roullier @ 2020-03-17 15:17 UTC (permalink / raw) To: davem, robh+dt, mark.rutland, mripard, martin.blumenstingl, alexandru.ardelean, narmstrong, mcoquelin.stm32, alexandre.torgue Cc: devicetree, netdev, christophe.roullier, linux-kernel, linux-stm32, linux-arm-kernel This change is needed for some soc based on snps,dwmac, which have more than 3 clocks. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> --- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index e08cd4c4d568..439115b7663c 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -27,6 +27,7 @@ select: - snps,dwmac-3.710 - snps,dwmac-4.00 - snps,dwmac-4.10a + - snps,dwmac-4.20a - snps,dwxgmac - snps,dwxgmac-2.10 @@ -62,6 +63,7 @@ properties: - snps,dwmac-3.710 - snps,dwmac-4.00 - snps,dwmac-4.10a + - snps,dwmac-4.20a - snps,dwxgmac - snps,dwxgmac-2.10 @@ -87,7 +89,8 @@ properties: clocks: minItems: 1 - maxItems: 3 + maxItems: 5 + additionalItems: true items: - description: GMAC main clock - description: Peripheral registers interface clock @@ -97,6 +100,8 @@ properties: clock will be used and this is fine on some platforms. clock-names: + minItems: 1 + maxItems: 5 additionalItems: true contains: enum: @@ -342,6 +347,7 @@ allOf: - allwinner,sun50i-a64-emac - snps,dwmac-4.00 - snps,dwmac-4.10a + - snps,dwmac-4.20a - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac -- 2.17.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCHv2 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema 2020-03-17 15:17 [PATCHv2 0/2] Convert stm32 dwmac to DT schema Christophe Roullier 2020-03-17 15:17 ` [PATCHv2 1/2] dt-bindings: net: dwmac: increase 'maxItems' for 'clocks', 'clock-names' properties Christophe Roullier @ 2020-03-17 15:17 ` Christophe Roullier 2020-03-30 22:17 ` Rob Herring 2020-03-24 7:04 ` [PATCHv2 0/2] " Christophe ROULLIER 2 siblings, 1 reply; 5+ messages in thread From: Christophe Roullier @ 2020-03-17 15:17 UTC (permalink / raw) To: davem, robh+dt, mark.rutland, mripard, martin.blumenstingl, alexandru.ardelean, narmstrong, mcoquelin.stm32, alexandre.torgue Cc: devicetree, netdev, christophe.roullier, linux-kernel, linux-stm32, linux-arm-kernel Convert stm32 dwmac to DT schema. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> --- .../devicetree/bindings/net/stm32-dwmac.txt | 44 ----- .../devicetree/bindings/net/stm32-dwmac.yaml | 160 ++++++++++++++++++ 2 files changed, 160 insertions(+), 44 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt deleted file mode 100644 index a90eef11dc46..000000000000 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt +++ /dev/null @@ -1,44 +0,0 @@ -STMicroelectronics STM32 / MCU DWMAC glue layer controller - -This file documents platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -The device node has following properties. - -Required properties: -- compatible: For MCU family should be "st,stm32-dwmac" to select glue, and - "snps,dwmac-3.50a" to select IP version. - For MPU family should be "st,stm32mp1-dwmac" to select - glue, and "snps,dwmac-4.20a" to select IP version. -- clocks: Must contain a phandle for each entry in clock-names. -- clock-names: Should be "stmmaceth" for the host clock. - Should be "mac-clk-tx" for the MAC TX clock. - Should be "mac-clk-rx" for the MAC RX clock. - For MPU family need to add also "ethstp" for power mode clock -- interrupt-names: Should contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Should be "macirq" for the main MAC IRQ - Should be "eth_wake_irq" for the IT which wake up system -- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which - encompases the glue register, and the offset of the control register. - -Optional properties: -- clock-names: For MPU family "eth-ck" for PHY without quartz -- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. -- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. - -Example: - - ethernet@40028000 { - compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; - reg = <0x40028000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <0 61 0>, <0 62 0>; - interrupt-names = "macirq", "eth_wake_irq"; - clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; - clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; - st,syscon = <&syscfg 0x4>; - snps,pbl = <8>; - snps,mixed-burst; - dma-ranges; - }; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml new file mode 100644 index 000000000000..4440216917b3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 / MCU DWMAC glue layer controller + +maintainers: + - Alexandre Torgue <alexandre.torgue@st.com> + - Christophe Roullier <christophe.roullier@st.com> + +description: + This file documents platform glue layer for stmmac. + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - st,stm32-dwmac + - st,stm32mp1-dwmac + required: + - compatible + +allOf: + - $ref: "snps,dwmac.yaml#" + - if: + properties: + compatible: + contains: + enum: + - st,stm32-dwmac + - st,stm32mp1-dwmac + then: + properties: + clocks: + minItems: 3 + maxItems: 5 + items: + - description: GMAC main clock + - description: MAC TX clock + - description: MAC RX clock + - description: For MPU family, used for power mode + - description: For MPU family, used for PHY without quartz + + clock-names: + minItems: 3 + maxItems: 5 + contains: + enum: + - stmmaceth + - mac-clk-tx + - mac-clk-rx + - ethstp + - eth-ck + +properties: + compatible: + oneOf: + - items: + - enum: + - st,stm32mp1-dwmac + - const: snps,dwmac-4.20a + - items: + - enum: + - st,stm32-dwmac + - const: snps,dwmac-4.10a + - items: + - enum: + - st,stm32-dwmac + - const: snps,dwmac-3.50a + + st,syscon: + allOf: + - $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: + Should be phandle/offset pair. The phandle to the syscon node which + encompases the glue register, and the offset of the control register + + st,eth-clk-sel: + description: + set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. + type: boolean + + st,eth-ref-clk-sel: + description: + set this property in RMII mode when you have PHY without crystal 50MHz and want to + select RCC clock instead of ETH_REF_CLK. + type: boolean + +required: + - compatible + - clocks + - clock-names + - st,syscon + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + #include <dt-bindings/mfd/stm32h7-rcc.h> + //Example 1 + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc ETHCK_K>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + status = "disabled"; + phy-mode = "rgmii"; + }; + + //Example 2 (MCU example) + ethernet1: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <0 61 0>, <0 62 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + dma-ranges; + phy-mode = "mii"; + }; + + //Example 3 + ethernet2: ethernet@40027000 { + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + status = "disabled"; + phy-mode = "mii"; + }; -- 2.17.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCHv2 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema 2020-03-17 15:17 ` [PATCHv2 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema Christophe Roullier @ 2020-03-30 22:17 ` Rob Herring 0 siblings, 0 replies; 5+ messages in thread From: Rob Herring @ 2020-03-30 22:17 UTC (permalink / raw) To: Christophe Roullier Cc: davem, mark.rutland, mripard, martin.blumenstingl, alexandru.ardelean, narmstrong, mcoquelin.stm32, alexandre.torgue, devicetree, netdev, linux-kernel, linux-stm32, linux-arm-kernel On Tue, Mar 17, 2020 at 04:17:06PM +0100, Christophe Roullier wrote: > Convert stm32 dwmac to DT schema. > > Signed-off-by: Christophe Roullier <christophe.roullier@st.com> > --- > .../devicetree/bindings/net/stm32-dwmac.txt | 44 ----- > .../devicetree/bindings/net/stm32-dwmac.yaml | 160 ++++++++++++++++++ > 2 files changed, 160 insertions(+), 44 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt > create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml > > diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt > deleted file mode 100644 > index a90eef11dc46..000000000000 > --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt > +++ /dev/null > @@ -1,44 +0,0 @@ > -STMicroelectronics STM32 / MCU DWMAC glue layer controller > - > -This file documents platform glue layer for stmmac. > -Please see stmmac.txt for the other unchanged properties. > - > -The device node has following properties. > - > -Required properties: > -- compatible: For MCU family should be "st,stm32-dwmac" to select glue, and > - "snps,dwmac-3.50a" to select IP version. > - For MPU family should be "st,stm32mp1-dwmac" to select > - glue, and "snps,dwmac-4.20a" to select IP version. > -- clocks: Must contain a phandle for each entry in clock-names. > -- clock-names: Should be "stmmaceth" for the host clock. > - Should be "mac-clk-tx" for the MAC TX clock. > - Should be "mac-clk-rx" for the MAC RX clock. > - For MPU family need to add also "ethstp" for power mode clock > -- interrupt-names: Should contain a list of interrupt names corresponding to > - the interrupts in the interrupts property, if available. > - Should be "macirq" for the main MAC IRQ > - Should be "eth_wake_irq" for the IT which wake up system > -- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which > - encompases the glue register, and the offset of the control register. > - > -Optional properties: > -- clock-names: For MPU family "eth-ck" for PHY without quartz > -- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. > -- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. > - > -Example: > - > - ethernet@40028000 { > - compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; > - reg = <0x40028000 0x8000>; > - reg-names = "stmmaceth"; > - interrupts = <0 61 0>, <0 62 0>; > - interrupt-names = "macirq", "eth_wake_irq"; > - clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; > - clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; > - st,syscon = <&syscfg 0x4>; > - snps,pbl = <8>; > - snps,mixed-burst; > - dma-ranges; > - }; > diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml > new file mode 100644 > index 000000000000..4440216917b3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml > @@ -0,0 +1,160 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2019 BayLibre, SAS > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: STMicroelectronics STM32 / MCU DWMAC glue layer controller > + > +maintainers: > + - Alexandre Torgue <alexandre.torgue@st.com> > + - Christophe Roullier <christophe.roullier@st.com> > + > +description: > + This file documents platform glue layer for stmmac. > + > +# We need a select here so we don't match all nodes with 'snps,dwmac' > +select: > + properties: > + compatible: > + contains: > + enum: > + - st,stm32-dwmac > + - st,stm32mp1-dwmac > + required: > + - compatible > + > +allOf: > + - $ref: "snps,dwmac.yaml#" > + - if: > + properties: > + compatible: > + contains: > + enum: > + - st,stm32-dwmac > + - st,stm32mp1-dwmac This schema is only applied when these compatibles are present, so you don't need the 'if' and all this can move to the main section. > + then: > + properties: > + clocks: > + minItems: 3 > + maxItems: 5 > + items: > + - description: GMAC main clock > + - description: MAC TX clock > + - description: MAC RX clock > + - description: For MPU family, used for power mode > + - description: For MPU family, used for PHY without quartz > + > + clock-names: > + minItems: 3 > + maxItems: 5 > + contains: > + enum: > + - stmmaceth > + - mac-clk-tx > + - mac-clk-rx > + - ethstp > + - eth-ck > + > +properties: > + compatible: > + oneOf: > + - items: > + - enum: > + - st,stm32mp1-dwmac > + - const: snps,dwmac-4.20a > + - items: > + - enum: > + - st,stm32-dwmac > + - const: snps,dwmac-4.10a > + - items: > + - enum: > + - st,stm32-dwmac > + - const: snps,dwmac-3.50a > + > + st,syscon: > + allOf: > + - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + description: > + Should be phandle/offset pair. The phandle to the syscon node which > + encompases the glue register, and the offset of the control register > + > + st,eth-clk-sel: > + description: > + set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. > + type: boolean > + > + st,eth-ref-clk-sel: > + description: > + set this property in RMII mode when you have PHY without crystal 50MHz and want to > + select RCC clock instead of ETH_REF_CLK. > + type: boolean > + > +required: > + - compatible > + - clocks > + - clock-names > + - st,syscon > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/stm32mp1-clks.h> > + #include <dt-bindings/reset/stm32mp1-resets.h> > + #include <dt-bindings/mfd/stm32h7-rcc.h> > + //Example 1 > + ethernet0: ethernet@5800a000 { > + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; > + reg = <0x5800a000 0x2000>; > + reg-names = "stmmaceth"; > + interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "macirq"; > + clock-names = "stmmaceth", > + "mac-clk-tx", > + "mac-clk-rx", > + "ethstp", > + "eth-ck"; > + clocks = <&rcc ETHMAC>, > + <&rcc ETHTX>, > + <&rcc ETHRX>, > + <&rcc ETHSTP>, > + <&rcc ETHCK_K>; > + st,syscon = <&syscfg 0x4>; > + snps,pbl = <2>; > + snps,axi-config = <&stmmac_axi_config_0>; > + snps,tso; > + status = "disabled"; Don't show status in examples. > + phy-mode = "rgmii"; > + }; Wrong indentation. > + > + //Example 2 (MCU example) > + ethernet1: ethernet@40028000 { > + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; > + reg = <0x40028000 0x8000>; > + reg-names = "stmmaceth"; > + interrupts = <0 61 0>, <0 62 0>; > + interrupt-names = "macirq", "eth_wake_irq"; > + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; > + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; > + st,syscon = <&syscfg 0x4>; > + snps,pbl = <8>; > + snps,mixed-burst; > + dma-ranges; > + phy-mode = "mii"; > + }; > + > + //Example 3 > + ethernet2: ethernet@40027000 { > + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; > + reg = <0x40028000 0x8000>; > + reg-names = "stmmaceth"; > + interrupts = <61>; > + interrupt-names = "macirq"; > + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; > + clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>; > + st,syscon = <&syscfg 0x4>; > + snps,pbl = <8>; > + status = "disabled"; > + phy-mode = "mii"; > + }; > -- > 2.17.1 > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCHv2 0/2] Convert stm32 dwmac to DT schema 2020-03-17 15:17 [PATCHv2 0/2] Convert stm32 dwmac to DT schema Christophe Roullier 2020-03-17 15:17 ` [PATCHv2 1/2] dt-bindings: net: dwmac: increase 'maxItems' for 'clocks', 'clock-names' properties Christophe Roullier 2020-03-17 15:17 ` [PATCHv2 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema Christophe Roullier @ 2020-03-24 7:04 ` Christophe ROULLIER 2 siblings, 0 replies; 5+ messages in thread From: Christophe ROULLIER @ 2020-03-24 7:04 UTC (permalink / raw) To: davem@davemloft.net, robh+dt@kernel.org, mark.rutland@arm.com, mripard@kernel.org, martin.blumenstingl@googlemail.com, alexandru.ardelean@analog.com, narmstrong@baylibre.com, mcoquelin.stm32@gmail.com, Alexandre TORGUE Cc: devicetree@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Hi, Gentle reminder Thanks in advance. Christophe. On 17/03/2020 16:17, Christophe Roullier wrote: > Convert stm32 dwmac to DT schema > > Christophe Roullier (2): > dt-bindings: net: dwmac: increase 'maxItems' for 'clocks', > 'clock-names' properties > dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema > > v1->v2: > update from Rob (solve checkpatch errors with trailing WS, > rename "Example", Wrap lines) > > .../devicetree/bindings/net/snps,dwmac.yaml | 8 +- > .../devicetree/bindings/net/stm32-dwmac.txt | 44 ----- > .../devicetree/bindings/net/stm32-dwmac.yaml | 160 ++++++++++++++++++ > 3 files changed, 167 insertions(+), 45 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt > create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-03-30 22:17 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-03-17 15:17 [PATCHv2 0/2] Convert stm32 dwmac to DT schema Christophe Roullier 2020-03-17 15:17 ` [PATCHv2 1/2] dt-bindings: net: dwmac: increase 'maxItems' for 'clocks', 'clock-names' properties Christophe Roullier 2020-03-17 15:17 ` [PATCHv2 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema Christophe Roullier 2020-03-30 22:17 ` Rob Herring 2020-03-24 7:04 ` [PATCHv2 0/2] " Christophe ROULLIER
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).