Re: [PATCH v10 0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel

[Matthias Kaehlcke <mka@chromium.org>]

On Mon, Mar 30, 2020 at 09:25:11PM +0200, Sam Ravnborg wrote:
> Hi Matthias.
> 
> On Sun, Mar 29, 2020 at 10:44:17AM -0700, Matthias Kaehlcke wrote:
> > Hi Sam,
> > 
> > On Sat, Mar 28, 2020 at 09:40:47PM +0100, Sam Ravnborg wrote:
> > > Hi Harigovindan
> > > 
> > > On Fri, Mar 27, 2020 at 01:06:34PM +0530, Harigovindan P wrote:
> > > > Adding support for visionox rm69299 panel driver and adding bindings for the same panel.
> > > > 
> > > > Harigovindan P (2):
> > > >   dt-bindings: display: add visionox rm69299 panel variant
> > > >   drm/panel: add support for rm69299 visionox panel driver
> > > 
> > > I have only the first patch, which is now applied.
> > > Please resend second patch as it is lost somewhere.
> > 
> > Yes, it seems for v8, v9 and v10 only the bindings were sent, even
> > though the cover letter and subject say it's a series of two patches.
> > 
> > To my knowledge the latest version of the driver patch is this:
> > 
> > https://patchwork.kernel.org/patch/11439689/
> 
> I did not go back and check, but I recall there was
> review feedback that is not yet addressed.
> 
> I applied the patch here and checkpatch was not happy:
> total: 14 errors, 22 warnings, 11 checks, 314 lines checked
> 
> Many of these are trivial indent or spaces used where tabs should be
> used.
> These needs to be fixed before the driver will be applied.
> 
> And there was too much that I just did it while applying.

Oh, I totally missed these, sure this needs to be addressed.

Harigovindan, please also double check if there is any outstanding
feedback that still needs to be addressed.

Thanks

Matthias