From: Dmitry Osipenko <digetx@gmail.com>
To: "Rob Herring" <robh+dt@kernel.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Jonathan Hunter" <jonathanh@nvidia.com>,
"Michał Mirosław" <mirq-linux@rere.qmqm.pl>,
"David Heidelberg" <david@ixit.cz>,
"Peter Geis" <pgwipeout@gmail.com>,
"Stephen Warren" <swarren@wwwdotorg.org>,
"Nicolas Chauvet" <kwizart@gmail.com>,
"Pedro Ângelo" <pangelo@void.io>,
"Matt Merhar" <mattmerhar@protonmail.com>
Cc: linux-tegra@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/6] Support NVIDIA Tegra-based Acer A500 and Nexus 7 devices
Date: Wed, 8 Apr 2020 23:39:39 +0300 [thread overview]
Message-ID: <20200408203945.10329-1-digetx@gmail.com> (raw)
Hello,
This series introduces upstream kernel support for Acer Iconia Tab A500
and ASUS Google Nexus 7 tablet devices. Please review and apply, thanks
in advance.
Changelog:
v3: - Improved device-tree node-names in accordance to review comments that
were made by Thierry Reding to v2.
- Corrected LVDS encoder powerdown-GPIO polarity on both A500 and Nexus 7
because I implemented the DRM bridges support in the Tegra DRM driver
and found that there was a mistake in the device-trees. The updated
polarity also matches the boards schematics. Now DRM bridges support
becomes mandatory since LVDS is getting disabled during of the encoder
driver probing. I'll send the DRM patch separately from this series.
- Replaced recently deprecated CONFIG_DRM_LVDS_ENCODER with the new
CONFIG_DRM_LVDS_CODEC in tegra_defconfig.
- Added more config options to tegra_defconfig, like pstore and thermal.
- Added atmel,cfg_name to the A500 DT, which is a new upcoming property
in 5.8+ that allows to specify the per-board hardware config file name.
v2: - Corrected "volume down" key-label in the grouper's device-tree and
improved some other names in device-trees.
- Added optional (upcoming in 5.8+) VDD/AVDD regulators to the touchscreen
node in A500 device-tree.
Dmitry Osipenko (6):
ARM: tegra: Add device-tree for Acer Iconia Tab A500
ARM: tegra: Add device-tree for ASUS Google Nexus 7
dt-bindings: Add vendor prefix for Acer Inc.
dt-bindings: ARM: tegra: Add Acer Iconia Tab A500
dt-bindings: ARM: tegra: Add ASUS Google Nexus 7
ARM: tegra_defconfig: Enable options useful for Nexus 7 and Acer A500
.../devicetree/bindings/arm/tegra.yaml | 10 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 3 +
.../boot/dts/tegra20-acer-a500-picasso.dts | 1458 +++++++++
.../tegra30-asus-nexus7-grouper-common.dtsi | 2646 +++++++++++++++++
.../boot/dts/tegra30-asus-nexus7-grouper.dts | 463 +++
.../boot/dts/tegra30-asus-nexus7-tilapia.dts | 549 ++++
arch/arm/configs/tegra_defconfig | 38 +
8 files changed, 5169 insertions(+)
create mode 100644 arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dts
create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dts
--
2.25.1
next reply other threads:[~2020-04-08 20:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-08 20:39 Dmitry Osipenko [this message]
2020-04-08 20:39 ` [PATCH v3 1/6] ARM: tegra: Add device-tree for Acer Iconia Tab A500 Dmitry Osipenko
2020-04-08 20:39 ` [PATCH v3 2/6] ARM: tegra: Add device-tree for ASUS Google Nexus 7 Dmitry Osipenko
2020-04-08 20:39 ` [PATCH v3 3/6] dt-bindings: Add vendor prefix for Acer Inc Dmitry Osipenko
2020-04-08 20:39 ` [PATCH v3 4/6] dt-bindings: ARM: tegra: Add Acer Iconia Tab A500 Dmitry Osipenko
2020-04-08 20:39 ` [PATCH v3 5/6] dt-bindings: ARM: tegra: Add ASUS Google Nexus 7 Dmitry Osipenko
2020-04-08 20:39 ` [PATCH v3 6/6] ARM: tegra_defconfig: Enable options useful for Nexus 7 and Acer A500 Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200408203945.10329-1-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=kwizart@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mattmerhar@protonmail.com \
--cc=mirq-linux@rere.qmqm.pl \
--cc=pangelo@void.io \
--cc=pgwipeout@gmail.com \
--cc=robh+dt@kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).