[PATCH v2 5/5] ARM: dts: qcom: msm8974-klte: Add USB node

[Iskren Chernev <iskren.chernev@gmail.com>]

From: Daniele Debernardi <drebrez@gmail.com>

This introduces the usb node which can be used e.g. for USB_ETH

Signed-off-by: Daniele Debernardi <drebrez@gmail.com>
---
 .../boot/dts/qcom-msm8974-samsung-klte.dts    | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index 42fc18804021..df85d90100d9 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -272,6 +272,31 @@ sdhci@f9824900 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdhc1_pin_a>;
 	};
+
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		/*extcon = <&smbb>, <&usb_id>;*/
+		/*vbus-supply = <&chg_otg>;*/
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pma8084_l6>;
+				v3p3-supply = <&pma8084_l24>;
+
+				/*extcon = <&smbb>;*/
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
 };
 
 &spmi_bus {
-- 
2.26.0