[PATCH V2 0/2] Convert stm32 dwmac to DT schema

[PATCH V2 0/2] Convert stm32 dwmac to DT schema

[Christophe Roullier]

Convert stm32 dwmac to DT schema

v1->v2: Remarks from Rob

Christophe Roullier (2):
  dt-bindings: net: dwmac: increase 'maxItems' for 'clocks',
    'clock-names' properties
  dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema

 .../devicetree/bindings/net/snps,dwmac.yaml   |   8 +-
 .../devicetree/bindings/net/stm32-dwmac.txt   |  44 -----
 .../devicetree/bindings/net/stm32-dwmac.yaml  | 150 ++++++++++++++++++
 3 files changed, 157 insertions(+), 45 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
 create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml

-- 
2.17.1

[PATCH V2 1/2] dt-bindings: net: dwmac: increase 'maxItems' for 'clocks', 'clock-names' properties

[Christophe Roullier]

This change is needed for some soc based on snps,dwmac, which have
more than 3 clocks.

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
---
 Documentation/devicetree/bindings/net/snps,dwmac.yaml | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index e08cd4c4d568..439115b7663c 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -27,6 +27,7 @@ select:
           - snps,dwmac-3.710
           - snps,dwmac-4.00
           - snps,dwmac-4.10a
+          - snps,dwmac-4.20a
           - snps,dwxgmac
           - snps,dwxgmac-2.10
 
@@ -62,6 +63,7 @@ properties:
         - snps,dwmac-3.710
         - snps,dwmac-4.00
         - snps,dwmac-4.10a
+        - snps,dwmac-4.20a
         - snps,dwxgmac
         - snps,dwxgmac-2.10
 
@@ -87,7 +89,8 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 3
+    maxItems: 5
+    additionalItems: true
     items:
       - description: GMAC main clock
       - description: Peripheral registers interface clock
@@ -97,6 +100,8 @@ properties:
           clock will be used and this is fine on some platforms.
 
   clock-names:
+    minItems: 1
+    maxItems: 5
     additionalItems: true
     contains:
       enum:
@@ -342,6 +347,7 @@ allOf:
               - allwinner,sun50i-a64-emac
               - snps,dwmac-4.00
               - snps,dwmac-4.10a
+              - snps,dwmac-4.20a
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac
-- 
2.17.1

Re: [PATCH V2 1/2] dt-bindings: net: dwmac: increase 'maxItems' for 'clocks', 'clock-names' properties

[Rob Herring]

On Fri, 3 Apr 2020 16:04:14 +0200, Christophe Roullier wrote:
> This change is needed for some soc based on snps,dwmac, which have
> more than 3 clocks.
> 
> Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
> ---
>  Documentation/devicetree/bindings/net/snps,dwmac.yaml | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 

Applied, thanks.

Rob

[PATCH V2 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema

[Christophe Roullier]

Convert stm32 dwmac to DT schema.

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
---
 .../devicetree/bindings/net/stm32-dwmac.txt   |  44 -----
 .../devicetree/bindings/net/stm32-dwmac.yaml  | 150 ++++++++++++++++++
 2 files changed, 150 insertions(+), 44 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
 create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
deleted file mode 100644
index a90eef11dc46..000000000000
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-STMicroelectronics STM32 / MCU DWMAC glue layer controller
-
-This file documents platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible:  For MCU family should be "st,stm32-dwmac" to select glue, and
-	       "snps,dwmac-3.50a" to select IP version.
-	       For MPU family should be "st,stm32mp1-dwmac" to select
-	       glue, and "snps,dwmac-4.20a" to select IP version.
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: Should be "stmmaceth" for the host clock.
-	       Should be "mac-clk-tx" for the MAC TX clock.
-	       Should be "mac-clk-rx" for the MAC RX clock.
-	       For MPU family need to add also "ethstp" for power mode clock
-- interrupt-names: Should contain a list of interrupt names corresponding to
-           the interrupts in the interrupts property, if available.
-		   Should be "macirq" for the main MAC IRQ
-		   Should be "eth_wake_irq" for the IT which wake up system
-- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
-	       encompases the glue register, and the offset of the control register.
-
-Optional properties:
-- clock-names:     For MPU family "eth-ck" for PHY without quartz
-- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
-- st,eth-ref-clk-sel (boolean) :  set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
-
-Example:
-
-	ethernet@40028000 {
-		compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
-		reg = <0x40028000 0x8000>;
-		reg-names = "stmmaceth";
-		interrupts = <0 61 0>, <0 62 0>;
-		interrupt-names = "macirq", "eth_wake_irq";
-		clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
-		clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
-		st,syscon = <&syscfg 0x4>;
-		snps,pbl = <8>;
-		snps,mixed-burst;
-		dma-ranges;
-	};
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
new file mode 100644
index 000000000000..f559293dbab5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@st.com>
+  - Christophe Roullier <christophe.roullier@st.com>
+
+description:
+  This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32-dwmac
+          - st,stm32mp1-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - st,stm32mp1-dwmac
+          - const: snps,dwmac-4.20a
+      - items:
+          - enum:
+              - st,stm32-dwmac
+          - const: snps,dwmac-4.10a
+      - items:
+          - enum:
+              - st,stm32-dwmac
+          - const: snps,dwmac-3.50a
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+    items:
+        - description: GMAC main clock
+        - description: MAC TX clock
+        - description: MAC RX clock
+        - description: For MPU family, used for power mode
+        - description: For MPU family, used for PHY without quartz
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+    contains:
+      enum:
+        - stmmaceth
+        - mac-clk-tx
+        - mac-clk-rx
+        - ethstp
+        - eth-ck
+
+  st,syscon:
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the glue register, and the offset of the control register
+
+  st,eth-clk-sel:
+    description:
+      set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
+    type: boolean
+
+  st,eth-ref-clk-sel:
+    description:
+      set this property in RMII mode when you have PHY without crystal 50MHz and want to
+      select RCC clock instead of ETH_REF_CLK.
+    type: boolean
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - st,syscon
+
+examples:
+ - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    #include <dt-bindings/mfd/stm32h7-rcc.h>
+    //Example 1
+     ethernet0: ethernet@5800a000 {
+           compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+           reg = <0x5800a000 0x2000>;
+           reg-names = "stmmaceth";
+           interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "macirq";
+           clock-names = "stmmaceth",
+                     "mac-clk-tx",
+                     "mac-clk-rx",
+                     "ethstp",
+                     "eth-ck";
+           clocks = <&rcc ETHMAC>,
+                <&rcc ETHTX>,
+                <&rcc ETHRX>,
+                <&rcc ETHSTP>,
+                <&rcc ETHCK_K>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <2>;
+           snps,axi-config = <&stmmac_axi_config_0>;
+           snps,tso;
+           phy-mode = "rgmii";
+       };
+
+    //Example 2 (MCU example)
+     ethernet1: ethernet@40028000 {
+           compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+           reg = <0x40028000 0x8000>;
+           reg-names = "stmmaceth";
+           interrupts = <0 61 0>, <0 62 0>;
+           interrupt-names = "macirq", "eth_wake_irq";
+           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+           clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <8>;
+           snps,mixed-burst;
+           dma-ranges;
+           phy-mode = "mii";
+       };
+
+    //Example 3
+     ethernet2: ethernet@40027000 {
+           compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+           reg = <0x40028000 0x8000>;
+           reg-names = "stmmaceth";
+           interrupts = <61>;
+           interrupt-names = "macirq";
+           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+           clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <8>;
+           phy-mode = "mii";
+       };
-- 
2.17.1

Re: [PATCH V2 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema

[Rob Herring]

On Fri, Apr 03, 2020 at 04:04:15PM +0200, Christophe Roullier wrote:
> Convert stm32 dwmac to DT schema.
> 
> Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
> ---
>  .../devicetree/bindings/net/stm32-dwmac.txt   |  44 -----
>  .../devicetree/bindings/net/stm32-dwmac.yaml  | 150 ++++++++++++++++++
>  2 files changed, 150 insertions(+), 44 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
>  create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> deleted file mode 100644
> index a90eef11dc46..000000000000
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -STMicroelectronics STM32 / MCU DWMAC glue layer controller
> -
> -This file documents platform glue layer for stmmac.
> -Please see stmmac.txt for the other unchanged properties.
> -
> -The device node has following properties.
> -
> -Required properties:
> -- compatible:  For MCU family should be "st,stm32-dwmac" to select glue, and
> -	       "snps,dwmac-3.50a" to select IP version.
> -	       For MPU family should be "st,stm32mp1-dwmac" to select
> -	       glue, and "snps,dwmac-4.20a" to select IP version.
> -- clocks: Must contain a phandle for each entry in clock-names.
> -- clock-names: Should be "stmmaceth" for the host clock.
> -	       Should be "mac-clk-tx" for the MAC TX clock.
> -	       Should be "mac-clk-rx" for the MAC RX clock.
> -	       For MPU family need to add also "ethstp" for power mode clock
> -- interrupt-names: Should contain a list of interrupt names corresponding to
> -           the interrupts in the interrupts property, if available.
> -		   Should be "macirq" for the main MAC IRQ
> -		   Should be "eth_wake_irq" for the IT which wake up system
> -- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
> -	       encompases the glue register, and the offset of the control register.
> -
> -Optional properties:
> -- clock-names:     For MPU family "eth-ck" for PHY without quartz
> -- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
> -- st,eth-ref-clk-sel (boolean) :  set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
> -
> -Example:
> -
> -	ethernet@40028000 {
> -		compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
> -		reg = <0x40028000 0x8000>;
> -		reg-names = "stmmaceth";
> -		interrupts = <0 61 0>, <0 62 0>;
> -		interrupt-names = "macirq", "eth_wake_irq";
> -		clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
> -		clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
> -		st,syscon = <&syscfg 0x4>;
> -		snps,pbl = <8>;
> -		snps,mixed-burst;
> -		dma-ranges;
> -	};
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> new file mode 100644
> index 000000000000..f559293dbab5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -0,0 +1,150 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 BayLibre, SAS
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
> +
> +maintainers:
> +  - Alexandre Torgue <alexandre.torgue@st.com>
> +  - Christophe Roullier <christophe.roullier@st.com>
> +
> +description:
> +  This file documents platform glue layer for stmmac.
> +
> +# We need a select here so we don't match all nodes with 'snps,dwmac'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - st,stm32-dwmac
> +          - st,stm32mp1-dwmac
> +  required:
> +    - compatible
> +
> +allOf:
> +  - $ref: "snps,dwmac.yaml#"
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - st,stm32mp1-dwmac
> +          - const: snps,dwmac-4.20a
> +      - items:
> +          - enum:
> +              - st,stm32-dwmac
> +          - const: snps,dwmac-4.10a
> +      - items:
> +          - enum:
> +              - st,stm32-dwmac
> +          - const: snps,dwmac-3.50a
> +
> +  clocks:
> +    minItems: 3
> +    maxItems: 5
> +    items:
> +        - description: GMAC main clock
> +        - description: MAC TX clock
> +        - description: MAC RX clock
> +        - description: For MPU family, used for power mode
> +        - description: For MPU family, used for PHY without quartz
> +
> +  clock-names:
> +    minItems: 3
> +    maxItems: 5
> +    contains:
> +      enum:
> +        - stmmaceth
> +        - mac-clk-tx
> +        - mac-clk-rx
> +        - ethstp
> +        - eth-ck
> +
> +  st,syscon:
> +    allOf:
> +      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    description:
> +      Should be phandle/offset pair. The phandle to the syscon node which
> +      encompases the glue register, and the offset of the control register
> +
> +  st,eth-clk-sel:
> +    description:
> +      set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
> +    type: boolean
> +
> +  st,eth-ref-clk-sel:
> +    description:
> +      set this property in RMII mode when you have PHY without crystal 50MHz and want to
> +      select RCC clock instead of ETH_REF_CLK.
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - st,syscon
> +
> +examples:
> + - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/stm32mp1-clks.h>
> +    #include <dt-bindings/reset/stm32mp1-resets.h>
> +    #include <dt-bindings/mfd/stm32h7-rcc.h>
> +    //Example 1
> +     ethernet0: ethernet@5800a000 {
> +           compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
> +           reg = <0x5800a000 0x2000>;
> +           reg-names = "stmmaceth";
> +           interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> +           interrupt-names = "macirq";
> +           clock-names = "stmmaceth",
> +                     "mac-clk-tx",
> +                     "mac-clk-rx",
> +                     "ethstp",
> +                     "eth-ck";
> +           clocks = <&rcc ETHMAC>,
> +                <&rcc ETHTX>,
> +                <&rcc ETHRX>,
> +                <&rcc ETHSTP>,
> +                <&rcc ETHCK_K>;
> +           st,syscon = <&syscfg 0x4>;
> +           snps,pbl = <2>;
> +           snps,axi-config = <&stmmac_axi_config_0>;
> +           snps,tso;
> +           phy-mode = "rgmii";
> +       };
> +
> +    //Example 2 (MCU example)
> +     ethernet1: ethernet@40028000 {
> +           compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
> +           reg = <0x40028000 0x8000>;
> +           reg-names = "stmmaceth";
> +           interrupts = <0 61 0>, <0 62 0>;
> +           interrupt-names = "macirq", "eth_wake_irq";
> +           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
> +           clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
> +           st,syscon = <&syscfg 0x4>;
> +           snps,pbl = <8>;
> +           snps,mixed-burst;
> +           dma-ranges;

dma-ranges is not valid here. I will drop on applying, but you should 
check your dts files.

Rob

Re: [PATCH V2 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema

[Rob Herring]

On Fri, 3 Apr 2020 16:04:15 +0200, Christophe Roullier wrote:
> Convert stm32 dwmac to DT schema.
> 
> Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
> ---
>  .../devicetree/bindings/net/stm32-dwmac.txt   |  44 -----
>  .../devicetree/bindings/net/stm32-dwmac.yaml  | 150 ++++++++++++++++++
>  2 files changed, 150 insertions(+), 44 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
>  create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> 

Applied, thanks.

Rob

Re: [PATCH V2 0/2] Convert stm32 dwmac to DT schema

[David Miller]

From: Christophe Roullier <christophe.roullier@st.com>
Date: Fri, 3 Apr 2020 16:04:13 +0200

> Convert stm32 dwmac to DT schema
> 
> v1->v2: Remarks from Rob

I am assuming that the DT folks will pick this up.

Re: [PATCH V2 0/2] Convert stm32 dwmac to DT schema

[Christophe ROULLIER]

Hi,

Gentle reminder

Thanks,

Christophe.

On 04/04/2020 01:14, David Miller wrote:
> From: Christophe Roullier <christophe.roullier@st.com>
> Date: Fri, 3 Apr 2020 16:04:13 +0200
>
>> Convert stm32 dwmac to DT schema
>>
>> v1->v2: Remarks from Rob
> I am assuming that the DT folks will pick this up.

Re: [PATCH V2 0/2] Convert stm32 dwmac to DT schema

[Rob Herring]

On Tue, Apr 14, 2020 at 03:11:03PM +0000, Christophe ROULLIER wrote:
> Hi,
> 
> Gentle reminder

If it is in DT patchwork, you can see where you are in the queue. Feel 
free to review patches in front of you for faster response. :)

Rob