[PATCH AUTOSEL 5.5 011/106] arm64: dts: librem5-devkit: add a vbus supply to usb0

[PATCH AUTOSEL 5.5 011/106] arm64: dts: librem5-devkit: add a vbus supply to usb0

[Sasha Levin]

From: "Angus Ainslie (Purism)" <angus@akkea.ca>

[ Upstream commit dde061b865598ad91f50140760e1d224e5045db9 ]

Without a VBUS supply the dwc3 driver won't go into otg mode.

Fixes: eb4ea0857c83 ("arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit")
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 596bc65f475c2..b2cf6f1925257 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -743,6 +743,7 @@
 };
 
 &usb3_phy0 {
+	vbus-supply = <&reg_5v_p>;
 	status = "okay";
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 012/106] ARM: dts: rockchip: fix vqmmc-supply property name for rk3188-bqedison2qc

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 9cd568dc588c5d168615bf34f325fabe33b2c9a0 ]

A test with the command below does not detect all errors
in combination with 'additionalProperties: false' and
allOf:
  - $ref: "synopsys-dw-mshc-common.yaml#"
allOf:
  - $ref: "mmc-controller.yaml#"

'additionalProperties' applies to all properties that are not
accounted-for by 'properties' or 'patternProperties' in
the immediate schema.

First when we combine rockchip-dw-mshc.yaml,
synopsys-dw-mshc-common.yaml and mmc-controller.yaml it gives
this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: mmc@10218000:
'vmmcq-supply' does not match any of the regexes:
'^.*@[0-9]+$',
'^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|
uhs-(sdr(12|25|50|104)|ddr50))$',
'pinctrl-[0-9]+'

'vmmcq-supply' is not a valid property name for mmc nodes.
Fix this error by renaming it to 'vqmmc-supply'.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200307134841.13803-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188-bqedison2qc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index ad1afd403052a..8afb2fd5d9f1b 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -465,7 +465,7 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
-	vmmcq-supply = <&vccio_wl>;
+	vqmmc-supply = <&vccio_wl>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
-- 
2.20.1

[PATCH AUTOSEL 5.5 013/106] arm64: dts: allwinner: a64: Fix display clock register range

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@siol.net>

[ Upstream commit 3e9a1a8b7f811de3eb1445d72f68766b704ad17c ]

Register range of display clocks is 0x10000, as it can be seen from
DE2 documentation.

Fix it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Fixes: 2c796fc8f5dbd ("arm64: dts: allwinner: a64: add necessary device tree nodes for DE2 CCU")
[wens@csie.org: added fixes tag]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 27e48234f1c23..38ecd227c34c1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -227,7 +227,7 @@
 
 			display_clocks: clock@0 {
 				compatible = "allwinner,sun50i-a64-de2-clk";
-				reg = <0x0 0x100000>;
+				reg = <0x0 0x10000>;
 				clocks = <&ccu CLK_BUS_DE>,
 					 <&ccu CLK_DE>;
 				clock-names = "bus",
-- 
2.20.1

[PATCH AUTOSEL 5.5 016/106] arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194

[Sasha Levin]

From: Vidya Sagar <vidyas@nvidia.com>

[ Upstream commit 0c988b731e6430f0081991fdb4f63f7fc837df9a ]

Add endpoint mode controllers nodes for the dual mode PCIe controllers
present in Tegra194 SoC.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 99 ++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 11220d97adb8d..2c8fae854a23e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -1425,6 +1425,105 @@
 			  0x82000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
+	pcie_ep@14160000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x36040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x36080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <4>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+			 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 4>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
+	pcie_ep@14180000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x38040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x38080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+			 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 0>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
+	pcie_ep@141a0000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 5>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
 	sysram@40000000 {
 		compatible = "nvidia,tegra194-sysram", "mmio-sram";
 		reg = <0x0 0x40000000 0x0 0x50000>;
-- 
2.20.1

[PATCH AUTOSEL 5.5 017/106] arm64: tegra: Fix Tegra194 PCIe compatible string

[Sasha Levin]

From: Jon Hunter <jonathanh@nvidia.com>

[ Upstream commit f9f711efd441ad0d22874be49986d92121862335 ]

If the kernel configuration option CONFIG_PCIE_DW_PLAT_HOST is enabled
then this can cause the kernel to incorrectly probe the generic
designware PCIe platform driver instead of the Tegra194 designware PCIe
driver. This causes a boot failure on Tegra194 because the necessary
configuration to access the hardware is not performed.

The order in which the compatible strings are populated in Device-Tree
is not relevant in this case, because the kernel will attempt to probe
the device as soon as a driver is loaded and if the generic designware
PCIe driver is loaded first, then this driver will be probed first.
Therefore, to fix this problem, remove the "snps,dw-pcie" string from
the compatible string as we never want this driver to be probe on
Tegra194.

Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/pci/nvidia,tegra194-pcie.txt |  2 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi             | 12 ++++++------
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
index b739f92da58e5..1f90eb39870be 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
@@ -118,7 +118,7 @@ Tegra194:
 --------
 
 	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 2c8fae854a23e..2b6f0b9aaf902 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -1152,7 +1152,7 @@
 	};
 
 	pcie@14100000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14100000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x30000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1197,7 +1197,7 @@
 	};
 
 	pcie@14120000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14120000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x32000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1242,7 +1242,7 @@
 	};
 
 	pcie@14140000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14140000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x34000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1287,7 +1287,7 @@
 	};
 
 	pcie@14160000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
 		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x36000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1332,7 +1332,7 @@
 	};
 
 	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1377,7 +1377,7 @@
 	};
 
 	pcie@141a0000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
 		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
-- 
2.20.1

[PATCH AUTOSEL 5.5 020/106] arm64: dts: marvell: espressobin: add ethernet alias

[Sasha Levin]

From: Tomasz Maciej Nowak <tmn505@gmail.com>

[ Upstream commit 5253cb8c00a6f4356760efb38bca0e0393aa06de ]

The maker of this board and its variants, stores MAC address in U-Boot
environment. Add alias for bootloader to recognise, to which ethernet
node inject the factory MAC address.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 53b8ac55a7f3d..e5262dab28f58 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -13,6 +13,12 @@
 #include "armada-372x.dtsi"
 
 / {
+	aliases {
+		ethernet0 = &eth0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
-- 
2.20.1

[PATCH AUTOSEL 5.5 021/106] arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 46f94c7818e7ab82758fca74935ef3d454340b4e ]

If the mv88e6xxx DSA driver is built as a module, it causes the
ethernet driver to re-probe when it's loaded. This in turn causes
the gigabit PHY to be momentarily reset and reprogrammed. However,
we attempt to reprogram the PHY immediately after deasserting reset,
and the PHY ignores the writes.

This results in the PHY operating in the wrong mode, and the copper
link states down.

Set a reset deassert delay of 10ms for the gigabit PHY to avoid this.

Fixes: babc5544c293 ("arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index a211a046b2f2f..b90d78a5724b2 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -367,6 +367,7 @@
 		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
 		reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
 	};
 
 	switch0: switch0@4 {
-- 
2.20.1

[PATCH AUTOSEL 5.5 022/106] arm64: dts: marvell: Fix cpu compatible for AP807-quad

[Sasha Levin]

From: Amit Kucheria <amit.kucheria@linaro.org>

[ Upstream commit d136d2588b21b1a07515632ed61120c9f262909b ]

make -k ARCH=arm64 dtbs_check shows the following errors. Fix them by
removing the "arm,armv8" compatible.

/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml:
cpu@0: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml:
cpu@0: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long CHECK
arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dt.yaml
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml:
cpu@1: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml:
cpu@1: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml:
cpu@100: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml:
cpu@100: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml:
cpu@101: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml:
cpu@101: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long

/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml:
cpu@0: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml:
cpu@0: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml:
cpu@1: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml:
cpu@1: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml:
cpu@100: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml:
cpu@100: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml:
cpu@101: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml:
cpu@101: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long

/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml:
cpu@0: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml:
cpu@0: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml:
cpu@1: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml:
cpu@1: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml:
cpu@100: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml:
cpu@100: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml:
cpu@101: compatible: Additional items are not allowed ('arm,armv8' was
unexpected)
/home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml:
cpu@101: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
index 840466e143b47..68782f161f122 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -17,7 +17,7 @@
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -32,7 +32,7 @@
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -47,7 +47,7 @@
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -62,7 +62,7 @@
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
-- 
2.20.1

[PATCH AUTOSEL 5.5 029/106] ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 1a7e99599dffd836fcb720cdc0eaf3cd43d7af4a ]

A test with the command below gives this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: lvds-encoder:
'ports' is a required property

Fix error by adding a ports wrapper for port@0 and port@1
inside the 'lvds-encoder' node for rk3188-bqedison2qc.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/
bridge/lvds-codec.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200316174647.5598-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188-bqedison2qc.dts | 27 ++++++++++++++----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index 8afb2fd5d9f1b..66a0ff196eb1f 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -58,20 +58,25 @@
 
 	lvds-encoder {
 		compatible = "ti,sn75lvds83", "lvds-encoder";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			lvds_in_vop0: endpoint {
-				remote-endpoint = <&vop0_out_lvds>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_in_vop0: endpoint {
+					remote-endpoint = <&vop0_out_lvds>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
-			lvds_out_panel: endpoint {
-				remote-endpoint = <&panel_in_lvds>;
+			port@1 {
+				reg = <1>;
+
+				lvds_out_panel: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
 			};
 		};
 	};
-- 
2.20.1

[PATCH AUTOSEL 5.5 040/106] MIPS: DTS: CI20: add DT node for IR sensor

[Sasha Levin]

From: Alex Smith <alex.smith@imgtec.com>

[ Upstream commit f5e8fcf85a25bac26c32a0000dbab5857ead9113 ]

The infrared sensor on the CI20 board is connected to a GPIO and can
be operated by using the gpio-ir-recv driver. Add a DT node for the
sensor to allow that driver to be used.

Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index c340f947baa03..fc4e64200c3d5 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -62,6 +62,11 @@
 		enable-active-high;
 	};
 
+	ir: ir {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
+	};
+
 	wlan0_power: fixedregulator@1 {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan0_power";
-- 
2.20.1

[PATCH AUTOSEL 5.5 054/106] dt-bindings: thermal: tsens: Fix nvmem-cell-names schema

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit b9589def9f9af93d9d4c5969c9a6c166f070e36e ]

There's a typo 'nvmem-cells-names' in the schema which means the correct
'nvmem-cell-names' in the examples are not checked. The possible values
are wrong too both in that the 2nd entry is not specified correctly and the
values are just wrong based on the dts files in the kernel.

Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema")
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/thermal/qcom-tsens.yaml          | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eef13b9446a87..a4df53228122a 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -53,13 +53,12 @@ properties:
     description:
       Reference to an nvmem node for the calibration data
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     minItems: 1
     maxItems: 2
     items:
-      - enum:
-        - caldata
-        - calsel
+      - const: calib
+      - const: calib_sel
 
   "#qcom,sensors":
     allOf:
@@ -125,7 +124,7 @@ examples:
                  <0x4a8000 0x1000>; /* SROT */
 
            nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-           nvmem-cell-names = "caldata", "calsel";
+           nvmem-cell-names = "calib", "calib_sel";
 
            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "uplow";
-- 
2.20.1