devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Eddie James <eajames@linux.ibm.com>
Cc: linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, joel@jms.id.au, andrew@aj.id.au
Subject: Re: [PATCH v9 1/5] dt-bindings: soc: Add Aspeed XDMA Engine
Date: Fri, 17 Apr 2020 11:22:11 -0500	[thread overview]
Message-ID: <20200417162210.GA402@bogus> (raw)
In-Reply-To: <1587067419-5107-2-git-send-email-eajames@linux.ibm.com>

On Thu, Apr 16, 2020 at 03:03:35PM -0500, Eddie James wrote:
> Document the bindings for the Aspeed AST25XX and AST26XX XDMA engine.
> 
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> Changes since v8:
>  - dropped Rob's tag since this has changed significantly since he last looked
>    it over.

If this is not merged soon, you're going to need to convert to schema.

>  .../devicetree/bindings/soc/aspeed/xdma.txt        | 45 ++++++++++++++++++++++
>  MAINTAINERS                                        |  6 +++
>  2 files changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/aspeed/xdma.txt
> 
> diff --git a/Documentation/devicetree/bindings/soc/aspeed/xdma.txt b/Documentation/devicetree/bindings/soc/aspeed/xdma.txt
> new file mode 100644
> index 0000000..35d0507
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/aspeed/xdma.txt
> @@ -0,0 +1,45 @@
> +Aspeed AST25XX and AST26XX XDMA Engine
> +
> +The XDMA Engine embedded in the AST2500 and AST2600 SOCs can perform automatic
> +DMA operations over PCI between the SOC (acting as a BMC) and a host processor.
> +
> +Required properties:
> + - compatible		: must be "aspeed,ast2500-xdma" or
> +			  "aspeed,ast2600-xdma"
> + - reg			: contains the address and size of the memory region
> +			  associated with the XDMA engine registers
> + - clocks		: clock specifier for the clock associated with the
> +			  XDMA engine
> + - resets		: reset specifier for the syscon reset associated with
> +			  the XDMA engine, and, for the AST2600, a second reset
> +			  associated with the PCI-E root complex
> + - reset-names		: required only for the AST2600; must be
> +			  "device", "root-complex"
> + - interrupts-extended	: two interrupt cells; the first specifies the global
> +			  interrupt for the XDMA engine and the second
> +			  specifies the PCI-E reset or PERST interrupt.
> + - aspeed,scu		: a phandle to the syscon node for the system control
> +			  unit of the SOC
> + - memory-region	: a phandle to the reserved memory region to be used by
> +			  the XDMA engine for DMA operations
> +
> +Optional properties:
> + - pcie-device		: should be either "bmc" or "vga", corresponding to
> +			  which device should be used by the XDMA engine for
> +			  DMA operations. If this property is not set, the XDMA
> +			  engine will use the BMC PCI-E device.

aspeed,pcie-device

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

> +
> +Example:
> +
> +    xdma@1e6e7000 {
> +        compatible = "aspeed,ast2600-xdma";
> +        reg = <0x1e6e7000 0x100>;
> +        clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
> +        resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
> +        reset-names = "device", "root-complex";
> +        interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +                              <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
> +        aspeed,scu = <&syscon>;
> +        pcie-device = "bmc";
> +        memory-region = <&vga_memory>;
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5e10560..66f82a2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2771,6 +2771,12 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/media/aspeed-video.txt
>  F:	drivers/media/platform/aspeed-video.c
>  
> +ASPEED XDMA ENGINE DRIVER
> +M:	Eddie James <eajames@linux.ibm.com>
> +L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/soc/aspeed/xdma.txt
> +
>  ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
>  M:	Corentin Chary <corentin.chary@gmail.com>
>  L:	acpi4asus-user@lists.sourceforge.net
> -- 
> 1.8.3.1
> 

  reply	other threads:[~2020-04-17 16:22 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-16 20:03 [PATCH v9 0/5] soc: aspeed: Add XDMA engine driver Eddie James
2020-04-16 20:03 ` [PATCH v9 1/5] dt-bindings: soc: Add Aspeed XDMA Engine Eddie James
2020-04-17 16:22   ` Rob Herring [this message]
2020-04-16 20:03 ` [PATCH v9 2/5] soc: aspeed: Add XDMA Engine Driver Eddie James
2020-04-16 20:03 ` [PATCH v9 3/5] soc: aspeed: xdma: Add user interface Eddie James
2020-04-16 20:03 ` [PATCH v9 4/5] soc: aspeed: xdma: Add reset ioctl Eddie James
2020-04-16 20:03 ` [PATCH v9 5/5] ARM: dts: Aspeed: AST2600: Add XDMA PCI-E root control reset Eddie James

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200417162210.GA402@bogus \
    --to=robh@kernel.org \
    --cc=andrew@aj.id.au \
    --cc=devicetree@vger.kernel.org \
    --cc=eajames@linux.ibm.com \
    --cc=joel@jms.id.au \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).