Re: [PATCH v5 2/9] arm64: dts: allwinner: h6: Add thermal trip points/cooling map

["Ondřej Jirman" <megous@megous.com>]

Hi,

On Mon, Apr 20, 2020 at 03:00:14PM +0200, Clément Péron wrote:
> From: Ondrej Jirman <megous@megous.com>
> 
> This enables passive cooling by down-regulating CPU voltage
> and frequency.

Does this not produce a lot of warnings for you during compilation?

regards,
	o.

> Signed-off-by: Ondrej Jirman <megous@megous.com>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 24 ++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index 370e77b86fe1..60da1627772b 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -964,6 +964,30 @@
>  			polling-delay-passive = <0>;
>  			polling-delay = <0>;
>  			thermal-sensors = <&ths 0>;
> +
> +			trips {
> +				cpu_alert: cpu-alert {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu-crit {
> +					temperature = <100000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_alert>;
> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
>  		gpu-thermal {
> -- 
> 2.20.1
>