* [PATCH v5 0/2] Add a watchdog driver that uses ARM Secure Monitor Calls.
@ 2020-04-23 4:40 Evan Benn
2020-04-23 4:40 ` [PATCH v5 1/2] dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog Evan Benn
0 siblings, 1 reply; 2+ messages in thread
From: Evan Benn @ 2020-04-23 4:40 UTC (permalink / raw)
To: LKML
Cc: jwerner, xingyu.chen, Evan Benn, Anson Huang, Bjorn Andersson,
Catalin Marinas, David S. Miller, Geert Uytterhoeven,
Greg Kroah-Hartman, Guenter Roeck, Leonard Crestez, Li Yang,
Marcin Juszkiewicz, Matthias Brugger, Mauro Carvalho Chehab,
Olof Johansson, Rob Herring, Rob Herring, Shawn Guo,
Valentin Schneider, Will Deacon, Wim Van Sebroeck, devicetree,
linux-arm-kernel, linux-mediatek, linux-watchdog
This is currently supported in firmware deployed on oak, hana and elm mt8173
chromebook devices. The kernel driver is written to be a generic SMC
watchdog driver.
Arm Trusted Firmware upstreaming review:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3405
Patch to add oak, hana, elm device tree:
https://lore.kernel.org/linux-arm-kernel/20200110073730.213789-1-hsinyi@chromium.org/
I would like to add the device tree support after the above patch is
accepted.
Changes in v5:
- Change compatible to arm,smc-wdt
- Make timeleft return 0 on error
- Use type punning on smc_func_id to save an alloc
- Change compatible to arm,smc-wdt
Changes in v4:
- Add arm,smc-id property
- Get smc-id from of property
- Return a1 instead of a0 in timeleft
Changes in v3:
- Change name back to arm
- Add optional get_timeleft op
- change name to arm_smc_wdt
Changes in v2:
- Change name arm > mt8173
- use watchdog_stop_on_reboot
- use watchdog_stop_on_unregister
- use devm_watchdog_register_device
- remove smcwd_shutdown, smcwd_remove
- change error codes
Evan Benn (1):
dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog
Julius Werner (1):
watchdog: Add new arm_smc_wdt watchdog driver
.../bindings/watchdog/arm-smc-wdt.yaml | 36 ++++
MAINTAINERS | 7 +
arch/arm64/configs/defconfig | 1 +
drivers/watchdog/Kconfig | 13 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/arm_smc_wdt.c | 189 ++++++++++++++++++
6 files changed, 247 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
create mode 100644 drivers/watchdog/arm_smc_wdt.c
--
2.26.2.303.gf8c07b1a785-goog
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH v5 1/2] dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog
2020-04-23 4:40 [PATCH v5 0/2] Add a watchdog driver that uses ARM Secure Monitor Calls Evan Benn
@ 2020-04-23 4:40 ` Evan Benn
0 siblings, 0 replies; 2+ messages in thread
From: Evan Benn @ 2020-04-23 4:40 UTC (permalink / raw)
To: LKML
Cc: jwerner, xingyu.chen, Evan Benn, David S. Miller,
Greg Kroah-Hartman, Guenter Roeck, Mauro Carvalho Chehab,
Rob Herring, Wim Van Sebroeck, devicetree, linux-watchdog
This watchdog can be used on ARM systems with a Secure
Monitor firmware to forward watchdog operations to
firmware via a Secure Monitor Call.
Signed-off-by: Evan Benn <evanbenn@chromium.org>
---
Changes in v5:
- Change compatible to arm,smc-wdt
Changes in v4:
- Add arm,smc-id property
Changes in v3:
- Change name back to arm
Changes in v2:
- Change name arm > mt8173
.../bindings/watchdog/arm-smc-wdt.yaml | 36 +++++++++++++++++++
MAINTAINERS | 6 ++++
2 files changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
diff --git a/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
new file mode 100644
index 0000000000000..0ee39aa3be027
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm-smc-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Secure Monitor Call based watchdog
+
+allOf:
+ - $ref: "watchdog.yaml#"
+
+maintainers:
+ - Julius Werner <jwerner@chromium.org>
+
+properties:
+ compatible:
+ enum:
+ - arm,smc-wdt
+ arm,smc-id:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 0x82003D06
+ description:
+ The ATF smc function id used by the firmware.
+
+required:
+ - compatible
+
+examples:
+ - |
+ watchdog {
+ compatible = "arm,smc-wdt";
+ timeout-sec = <15>;
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index b816a453b10eb..0f2b39767bfa9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1457,6 +1457,12 @@ S: Maintained
F: Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
F: drivers/irqchip/irq-vic.c
+ARM SMC WATCHDOG DRIVER
+M: Julius Werner <jwerner@chromium.org>
+R: Evan Benn <evanbenn@chromium.org>
+S: Maintained
+F: devicetree/bindings/watchdog/arm-smc-wdt.yaml
+
ARM SMMU DRIVERS
M: Will Deacon <will@kernel.org>
R: Robin Murphy <robin.murphy@arm.com>
--
2.26.2.303.gf8c07b1a785-goog
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-04-23 4:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-04-23 4:40 [PATCH v5 0/2] Add a watchdog driver that uses ARM Secure Monitor Calls Evan Benn
2020-04-23 4:40 ` [PATCH v5 1/2] dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog Evan Benn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).