Re: [PATCH net-next v2 7/9] net: phy: enable qoriq backplane support

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

On Fri, Apr 24, 2020 at 03:46:29PM +0300, Florinel Iordache wrote:
> Enable backplane support for qoriq family of devices

This uses phylib, which is a problem if you have this PCS device
connecting across a backplane to a standard copper PHY (which will
also be a phylib PHY.)  phylib and the networking layer more widely
does not support this setup.

Hence, this can only work when there is no copper PHY on the other
end.

The model presented by phylink since its inception is to drive the
PCS entirely as a separate non-phylib device.  It seems that when
you encounter a setup with a copper PHY on the other end of the
backplane KR link, you're going to have to rewrite all this code
to bolt into phylink.

I thought one of the reasons for the hour long conference call was to
try and sort this out by coming up with an approach for how to deal
with these PCS devices... but it seems the same problems still exist,
and very few of our comments that any kernel maintainer have made have
been addressed so far.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up