From: Yifeng Zhao <yifeng.zhao@rock-chips.com>
To: miquel.raynal@bootlin.com, richard@nod.at, vigneshr@ti.com,
robh+dt@kernel.org
Cc: devicetree@vger.kernel.org, linux-mtd@lists.infradead.org,
heiko@sntech.de, linux-rockchip@lists.infradead.org,
Yifeng Zhao <yifeng.zhao@rock-chips.com>
Subject: [PATCH v5 1/7] dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller
Date: Sun, 26 Apr 2020 18:02:44 +0800 [thread overview]
Message-ID: <20200426100250.14678-2-yifeng.zhao@rock-chips.com> (raw)
In-Reply-To: <20200426100250.14678-1-yifeng.zhao@rock-chips.com>
Documentation support for Rockchip RK3xxx NAND flash controllers
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
---
Changes in v5:
- Fix some wrong define
- Add boot-medium define
- Remove some compatible define
Changes in v4:
- The compatible define with rkxx_nfc
- Add assigned-clocks
- Fix some wrong define
Changes in v3:
- Change the title for the dt-bindings
Changes in v2: None
.../mtd/rockchip,nand-controller.yaml | 124 ++++++++++++++++++
1 file changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
new file mode 100644
index 000000000000..12354c79d275
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/rockchip,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoCs NAND FLASH Controller (NFC)
+
+allOf:
+ - $ref: "nand-controller.yaml#"
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30_nfc
+ - rockchip,rk3xxx_nfc
+ - rockchip,rk3308_nfc
+ - rockchip,rv1108_nfc
+
+ reg:
+ minItems: 1
+
+ interrupts:
+ minItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: ahb
+ - const: nfc
+
+patternProperties:
+ "^nand@[0-3]$":
+ type: object
+ properties:
+ reg:
+ minimum: 0
+ maximum: 3
+
+ nand-ecc-mode:
+ const: hw
+
+ nand-ecc-step-size:
+ const: 1024
+
+ nand-ecc-strength:
+ enum: [16,24,40,60,70]
+
+ nand-bus-width:
+ const: 8
+
+ nand-is-boot-medium: true
+
+ rockchip-boot-blks:
+ minimum: 2
+ default: 16
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ For legacy devices where the bootrom can only handle 16/24 bit
+ BCH/ECC, and for some other devices where the bootrom can support
+ 60/70 bit BCH/ECC.
+ In addition, when programming the loader, a linked list needs to
+ be written in oob for Bootrom to read the correct data sequence.
+ If specified it indicates the number of erase blocks in use by
+ the bootloader that need a different BCH/ECC setting.
+ Only used in combination with 'nand-is-boot-medium'.
+
+ rockchip-boot-ecc-strength:
+ enum: [16,24,40,60,70]
+ description:
+ If specified it indicates that use a different BCH/ECC setting for
+ bootrom.
+ Only used in combination with 'nand-is-boot-medium'.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3308-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ nfc: nand-controller@ff4b0000 {
+ compatible = "rockchip,rk3308_nfc";
+ reg = <0x0 0xff4b0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+ clock-names = "ahb", "nfc";
+ assigned-clocks = <&clks SCLK_NANDC>;
+ assigned-clock-rates = <150000000>;
+
+ pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
+ &flash_rdn &flash_rdy &flash_wrn>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <16>;
+ nand-ecc-step-size = <1024>;
+ nand-is-boot-medium;
+ rockchip-boot-blks = <8>;
+ rockchip-boot-ecc-strength = <16>;
+ };
+ };
+
+...
--
2.17.1
next prev parent reply other threads:[~2020-04-26 10:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-26 10:02 [PATCH v5 0/7] Add Rockchip NFC drivers for RK3308 and others Yifeng Zhao
2020-04-26 10:02 ` Yifeng Zhao [this message]
2020-04-28 15:01 ` [PATCH v5 1/7] dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller Rob Herring
2020-04-29 3:56 ` Re: [PATCH v5 1/7] dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller【请注意,邮件由robherring2@gmail.com代发】 赵仪峰
2020-04-29 8:53 ` [PATCH v5 1/7] dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller Johan Jonker
2020-04-29 9:13 ` Miquel Raynal
2020-04-29 9:28 ` Johan Jonker
2020-04-30 13:02 ` 赵仪峰
2020-05-01 11:47 ` Johan Jonker
2020-04-26 10:02 ` [PATCH v5 2/7] mtd: rawnand: rockchip: NFC drivers for RK3308, RK3188 and others Yifeng Zhao
2020-04-26 15:59 ` Johan Jonker
2020-04-29 11:02 ` Re: [PATCH v5 2/7] mtd: rawnand: rockchip: NFC drivers for RK3308, RK3188 and others【请注意,邮件由linux-rockchip-bounces+yifeng.zhao=rock-chips.com@lists.infradead.org代发】 赵仪峰
2020-04-29 15:55 ` [PATCH v5 2/7] mtd: rawnand: rockchip: NFC drivers for RK3308, RK3188 and others Johan Jonker
2020-04-29 17:04 ` Miquel Raynal
2020-04-26 10:02 ` [PATCH v5 3/7] MAINTAINERS: add maintainers to rockchip nfc Yifeng Zhao
2020-04-26 13:40 ` Johan Jonker
2020-04-26 10:02 ` [PATCH v5 4/7] arm64: dts: rockchip: Add nfc dts for RK3308 SOC Yifeng Zhao
2020-04-26 10:11 ` [PATCH v5 5/7] arm64: dts: rockchip: Add nfc dts for PX30 SOC Yifeng Zhao
2020-04-26 10:11 ` [PATCH v5 6/7] xarm: dts: rockchip: Add nfc dts for RV1108 SOC Yifeng Zhao
2020-04-26 10:11 ` [PATCH v5 7/7] arm: dts: rockchip: Add nfc dts for RK3066 and RK3188 SOC Yifeng Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200426100250.14678-2-yifeng.zhao@rock-chips.com \
--to=yifeng.zhao@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).